[Intel-gfx] [PATCH 3/6] drm/atomic: Don't overrun the connector array when hotplugging
Daniel Vetter
daniel.vetter at ffwll.ch
Wed Nov 19 18:38:08 CET 2014
Yet another fallout from not considering DP MST hotplug. With the
previous patches we have stable indices, but it might still happen
that a connector gets added between when we allocate the array and
when we actually add a connector. Especially when we back off due to
ww mutex contention or similar issues.
So store the sizes of the arrays in struct drm_atomic_state and double
check them. We don't really care about races except that we want to
use a consistent value, so ACCESS_ONCE is all we need. And if we
indeed notice that we'd overrun the array then just give up and
restart the entire ioctl.
Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
---
drivers/gpu/drm/drm_atomic.c | 26 +++++++++++++++++++++-----
drivers/gpu/drm/drm_atomic_helper.c | 23 ++++++++---------------
include/drm/drm_crtc.h | 2 ++
3 files changed, 31 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 67c1dc894bd9..3624632084e2 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -56,6 +56,8 @@ drm_atomic_state_alloc(struct drm_device *dev)
if (!state)
return NULL;
+ state->num_connector = ACCESS_ONCE(dev->mode_config.num_connector);
+
state->crtcs = kcalloc(dev->mode_config.num_crtc,
sizeof(*state->crtcs), GFP_KERNEL);
if (!state->crtcs)
@@ -72,12 +74,12 @@ drm_atomic_state_alloc(struct drm_device *dev)
sizeof(*state->plane_states), GFP_KERNEL);
if (!state->plane_states)
goto fail;
- state->connectors = kcalloc(dev->mode_config.num_connector,
+ state->connectors = kcalloc(state->num_connector,
sizeof(*state->connectors),
GFP_KERNEL);
if (!state->connectors)
goto fail;
- state->connector_states = kcalloc(dev->mode_config.num_connector,
+ state->connector_states = kcalloc(state->num_connector,
sizeof(*state->connector_states),
GFP_KERNEL);
if (!state->connector_states)
@@ -117,7 +119,7 @@ void drm_atomic_state_clear(struct drm_atomic_state *state)
DRM_DEBUG_KMS("Clearing atomic state %p\n", state);
- for (i = 0; i < config->num_connector; i++) {
+ for (i = 0; i < state->num_connector; i++) {
struct drm_connector *connector = state->connectors[i];
if (!connector)
@@ -304,6 +306,21 @@ drm_atomic_get_connector_state(struct drm_atomic_state *state,
index = drm_connector_index(connector);
+ /*
+ * Construction of atomic state updates can race with a connector
+ * hot-add which might overflow. In this case flip the table and just
+ * restart the entire ioctl - no one is fast enough to livelock a cpu
+ * with physical hotplug events anyway.
+ *
+ * Note that we only grab the indexes once we have the right lock to
+ * prevent hotplug/unplugging of connectors. So removal is no problem,
+ * at most the array is a bit too large.
+ */
+ if (index >= state->num_connector) {
+ DRM_DEBUG_KMS("Hot-added connector would overflow state array, restarting\n");
+ return -EAGAIN;
+ }
+
if (state->connector_states[index])
return state->connector_states[index];
@@ -499,10 +516,9 @@ int
drm_atomic_connectors_for_crtc(struct drm_atomic_state *state,
struct drm_crtc *crtc)
{
- int nconnectors = state->dev->mode_config.num_connector;
int i, num_connected_connectors = 0;
- for (i = 0; i < nconnectors; i++) {
+ for (i = 0; i < state->num_connector; i++) {
struct drm_connector_state *conn_state;
conn_state = state->connector_states[i];
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 0cd054615920..99095ef147ef 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -249,7 +249,6 @@ static int
mode_fixup(struct drm_atomic_state *state)
{
int ncrtcs = state->dev->mode_config.num_crtc;
- int nconnectors = state->dev->mode_config.num_connector;
struct drm_crtc_state *crtc_state;
struct drm_connector_state *conn_state;
int i;
@@ -264,7 +263,7 @@ mode_fixup(struct drm_atomic_state *state)
drm_mode_copy(&crtc_state->adjusted_mode, &crtc_state->mode);
}
- for (i = 0; i < nconnectors; i++) {
+ for (i = 0; i < state->num_connector; i++) {
struct drm_encoder_helper_funcs *funcs;
struct drm_encoder *encoder;
@@ -336,7 +335,6 @@ drm_atomic_helper_check_prepare(struct drm_device *dev,
struct drm_atomic_state *state)
{
int ncrtcs = dev->mode_config.num_crtc;
- int nconnectors = dev->mode_config.num_connector;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
int i, ret;
@@ -361,7 +359,7 @@ drm_atomic_helper_check_prepare(struct drm_device *dev,
}
}
- for (i = 0; i < nconnectors; i++) {
+ for (i = 0; i < state->num_connector; i++) {
/*
* This only sets crtc->mode_changed for routing changes,
* drivers must set crtc->mode_changed themselves when connector
@@ -485,10 +483,9 @@ static void
disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
{
int ncrtcs = old_state->dev->mode_config.num_crtc;
- int nconnectors = old_state->dev->mode_config.num_connector;
int i;
- for (i = 0; i < nconnectors; i++) {
+ for (i = 0; i < old_state->num_connector; i++) {
struct drm_connector_state *old_conn_state;
struct drm_connector *connector;
struct drm_encoder_helper_funcs *funcs;
@@ -553,12 +550,11 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
static void
set_routing_links(struct drm_device *dev, struct drm_atomic_state *old_state)
{
- int nconnectors = dev->mode_config.num_connector;
int ncrtcs = old_state->dev->mode_config.num_crtc;
int i;
/* clear out existing links */
- for (i = 0; i < nconnectors; i++) {
+ for (i = 0; i < old_state->num_connector; i++) {
struct drm_connector *connector;
connector = old_state->connectors[i];
@@ -573,7 +569,7 @@ set_routing_links(struct drm_device *dev, struct drm_atomic_state *old_state)
}
/* set new links */
- for (i = 0; i < nconnectors; i++) {
+ for (i = 0; i < old_state->num_connector; i++) {
struct drm_connector *connector;
connector = old_state->connectors[i];
@@ -608,7 +604,6 @@ static void
crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *old_state)
{
int ncrtcs = old_state->dev->mode_config.num_crtc;
- int nconnectors = old_state->dev->mode_config.num_connector;
int i;
for (i = 0; i < ncrtcs; i++) {
@@ -626,7 +621,7 @@ crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *old_state)
funcs->mode_set_nofb(crtc);
}
- for (i = 0; i < nconnectors; i++) {
+ for (i = 0; i < old_state->num_connector; i++) {
struct drm_connector *connector;
struct drm_crtc_state *new_crtc_state;
struct drm_encoder_helper_funcs *funcs;
@@ -687,7 +682,6 @@ void drm_atomic_helper_commit_post_planes(struct drm_device *dev,
struct drm_atomic_state *old_state)
{
int ncrtcs = old_state->dev->mode_config.num_crtc;
- int nconnectors = old_state->dev->mode_config.num_connector;
int i;
for (i = 0; i < ncrtcs; i++) {
@@ -706,7 +700,7 @@ void drm_atomic_helper_commit_post_planes(struct drm_device *dev,
funcs->commit(crtc);
}
- for (i = 0; i < nconnectors; i++) {
+ for (i = 0; i < old_state->num_connector; i++) {
struct drm_connector *connector;
struct drm_encoder_helper_funcs *funcs;
struct drm_encoder *encoder;
@@ -1304,7 +1298,6 @@ static int update_output_state(struct drm_atomic_state *state,
{
struct drm_device *dev = set->crtc->dev;
struct drm_connector_state *conn_state;
- int nconnectors = state->dev->mode_config.num_connector;
int ncrtcs = state->dev->mode_config.num_crtc;
int ret, i, j;
@@ -1333,7 +1326,7 @@ static int update_output_state(struct drm_atomic_state *state,
}
/* Then recompute connector->crtc links and crtc enabling state. */
- for (i = 0; i < nconnectors; i++) {
+ for (i = 0; i < state->num_connector; i++) {
struct drm_connector *connector;
connector = state->connectors[i];
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 91c09520aad3..cdbae7bdac70 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -845,6 +845,7 @@ struct drm_bridge {
* @plane_states: pointer to array of plane states pointers
* @crtcs: pointer to array of CRTC pointers
* @crtc_states: pointer to array of CRTC states pointers
+ * @num_connector: size of the @connectors and @connector_states arrays
* @connectors: pointer to array of connector pointers
* @connector_states: pointer to array of connector states pointers
* @acquire_ctx: acquire context for this atomic modeset state update
@@ -856,6 +857,7 @@ struct drm_atomic_state {
struct drm_plane_state **plane_states;
struct drm_crtc **crtcs;
struct drm_crtc_state **crtc_states;
+ int num_connector;
struct drm_connector **connectors;
struct drm_connector_state **connector_states;
--
2.1.1
More information about the Intel-gfx
mailing list