[Intel-gfx] [PATCH 3/6] drm/atomic: Don't overrun the connector array when hotplugging
Rob Clark
robdclark at gmail.com
Wed Nov 19 21:24:18 CET 2014
On Wed, Nov 19, 2014 at 12:38 PM, Daniel Vetter <daniel.vetter at ffwll.ch> wrote:
> Yet another fallout from not considering DP MST hotplug. With the
> previous patches we have stable indices, but it might still happen
> that a connector gets added between when we allocate the array and
> when we actually add a connector. Especially when we back off due to
> ww mutex contention or similar issues.
>
> So store the sizes of the arrays in struct drm_atomic_state and double
> check them. We don't really care about races except that we want to
> use a consistent value, so ACCESS_ONCE is all we need. And if we
> indeed notice that we'd overrun the array then just give up and
> restart the entire ioctl.
>
> Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
Reviewed-by: Rob Clark <robdclark at gmail.com>
> ---
> drivers/gpu/drm/drm_atomic.c | 26 +++++++++++++++++++++-----
> drivers/gpu/drm/drm_atomic_helper.c | 23 ++++++++---------------
> include/drm/drm_crtc.h | 2 ++
> 3 files changed, 31 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index 67c1dc894bd9..3624632084e2 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -56,6 +56,8 @@ drm_atomic_state_alloc(struct drm_device *dev)
> if (!state)
> return NULL;
>
> + state->num_connector = ACCESS_ONCE(dev->mode_config.num_connector);
> +
> state->crtcs = kcalloc(dev->mode_config.num_crtc,
> sizeof(*state->crtcs), GFP_KERNEL);
> if (!state->crtcs)
> @@ -72,12 +74,12 @@ drm_atomic_state_alloc(struct drm_device *dev)
> sizeof(*state->plane_states), GFP_KERNEL);
> if (!state->plane_states)
> goto fail;
> - state->connectors = kcalloc(dev->mode_config.num_connector,
> + state->connectors = kcalloc(state->num_connector,
> sizeof(*state->connectors),
> GFP_KERNEL);
> if (!state->connectors)
> goto fail;
> - state->connector_states = kcalloc(dev->mode_config.num_connector,
> + state->connector_states = kcalloc(state->num_connector,
> sizeof(*state->connector_states),
> GFP_KERNEL);
> if (!state->connector_states)
> @@ -117,7 +119,7 @@ void drm_atomic_state_clear(struct drm_atomic_state *state)
>
> DRM_DEBUG_KMS("Clearing atomic state %p\n", state);
>
> - for (i = 0; i < config->num_connector; i++) {
> + for (i = 0; i < state->num_connector; i++) {
> struct drm_connector *connector = state->connectors[i];
>
> if (!connector)
> @@ -304,6 +306,21 @@ drm_atomic_get_connector_state(struct drm_atomic_state *state,
>
> index = drm_connector_index(connector);
>
> + /*
> + * Construction of atomic state updates can race with a connector
> + * hot-add which might overflow. In this case flip the table and just
> + * restart the entire ioctl - no one is fast enough to livelock a cpu
> + * with physical hotplug events anyway.
> + *
> + * Note that we only grab the indexes once we have the right lock to
> + * prevent hotplug/unplugging of connectors. So removal is no problem,
> + * at most the array is a bit too large.
> + */
> + if (index >= state->num_connector) {
> + DRM_DEBUG_KMS("Hot-added connector would overflow state array, restarting\n");
> + return -EAGAIN;
> + }
> +
> if (state->connector_states[index])
> return state->connector_states[index];
>
> @@ -499,10 +516,9 @@ int
> drm_atomic_connectors_for_crtc(struct drm_atomic_state *state,
> struct drm_crtc *crtc)
> {
> - int nconnectors = state->dev->mode_config.num_connector;
> int i, num_connected_connectors = 0;
>
> - for (i = 0; i < nconnectors; i++) {
> + for (i = 0; i < state->num_connector; i++) {
> struct drm_connector_state *conn_state;
>
> conn_state = state->connector_states[i];
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> index 0cd054615920..99095ef147ef 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -249,7 +249,6 @@ static int
> mode_fixup(struct drm_atomic_state *state)
> {
> int ncrtcs = state->dev->mode_config.num_crtc;
> - int nconnectors = state->dev->mode_config.num_connector;
> struct drm_crtc_state *crtc_state;
> struct drm_connector_state *conn_state;
> int i;
> @@ -264,7 +263,7 @@ mode_fixup(struct drm_atomic_state *state)
> drm_mode_copy(&crtc_state->adjusted_mode, &crtc_state->mode);
> }
>
> - for (i = 0; i < nconnectors; i++) {
> + for (i = 0; i < state->num_connector; i++) {
> struct drm_encoder_helper_funcs *funcs;
> struct drm_encoder *encoder;
>
> @@ -336,7 +335,6 @@ drm_atomic_helper_check_prepare(struct drm_device *dev,
> struct drm_atomic_state *state)
> {
> int ncrtcs = dev->mode_config.num_crtc;
> - int nconnectors = dev->mode_config.num_connector;
> struct drm_crtc *crtc;
> struct drm_crtc_state *crtc_state;
> int i, ret;
> @@ -361,7 +359,7 @@ drm_atomic_helper_check_prepare(struct drm_device *dev,
> }
> }
>
> - for (i = 0; i < nconnectors; i++) {
> + for (i = 0; i < state->num_connector; i++) {
> /*
> * This only sets crtc->mode_changed for routing changes,
> * drivers must set crtc->mode_changed themselves when connector
> @@ -485,10 +483,9 @@ static void
> disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
> {
> int ncrtcs = old_state->dev->mode_config.num_crtc;
> - int nconnectors = old_state->dev->mode_config.num_connector;
> int i;
>
> - for (i = 0; i < nconnectors; i++) {
> + for (i = 0; i < old_state->num_connector; i++) {
> struct drm_connector_state *old_conn_state;
> struct drm_connector *connector;
> struct drm_encoder_helper_funcs *funcs;
> @@ -553,12 +550,11 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
> static void
> set_routing_links(struct drm_device *dev, struct drm_atomic_state *old_state)
> {
> - int nconnectors = dev->mode_config.num_connector;
> int ncrtcs = old_state->dev->mode_config.num_crtc;
> int i;
>
> /* clear out existing links */
> - for (i = 0; i < nconnectors; i++) {
> + for (i = 0; i < old_state->num_connector; i++) {
> struct drm_connector *connector;
>
> connector = old_state->connectors[i];
> @@ -573,7 +569,7 @@ set_routing_links(struct drm_device *dev, struct drm_atomic_state *old_state)
> }
>
> /* set new links */
> - for (i = 0; i < nconnectors; i++) {
> + for (i = 0; i < old_state->num_connector; i++) {
> struct drm_connector *connector;
>
> connector = old_state->connectors[i];
> @@ -608,7 +604,6 @@ static void
> crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *old_state)
> {
> int ncrtcs = old_state->dev->mode_config.num_crtc;
> - int nconnectors = old_state->dev->mode_config.num_connector;
> int i;
>
> for (i = 0; i < ncrtcs; i++) {
> @@ -626,7 +621,7 @@ crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *old_state)
> funcs->mode_set_nofb(crtc);
> }
>
> - for (i = 0; i < nconnectors; i++) {
> + for (i = 0; i < old_state->num_connector; i++) {
> struct drm_connector *connector;
> struct drm_crtc_state *new_crtc_state;
> struct drm_encoder_helper_funcs *funcs;
> @@ -687,7 +682,6 @@ void drm_atomic_helper_commit_post_planes(struct drm_device *dev,
> struct drm_atomic_state *old_state)
> {
> int ncrtcs = old_state->dev->mode_config.num_crtc;
> - int nconnectors = old_state->dev->mode_config.num_connector;
> int i;
>
> for (i = 0; i < ncrtcs; i++) {
> @@ -706,7 +700,7 @@ void drm_atomic_helper_commit_post_planes(struct drm_device *dev,
> funcs->commit(crtc);
> }
>
> - for (i = 0; i < nconnectors; i++) {
> + for (i = 0; i < old_state->num_connector; i++) {
> struct drm_connector *connector;
> struct drm_encoder_helper_funcs *funcs;
> struct drm_encoder *encoder;
> @@ -1304,7 +1298,6 @@ static int update_output_state(struct drm_atomic_state *state,
> {
> struct drm_device *dev = set->crtc->dev;
> struct drm_connector_state *conn_state;
> - int nconnectors = state->dev->mode_config.num_connector;
> int ncrtcs = state->dev->mode_config.num_crtc;
> int ret, i, j;
>
> @@ -1333,7 +1326,7 @@ static int update_output_state(struct drm_atomic_state *state,
> }
>
> /* Then recompute connector->crtc links and crtc enabling state. */
> - for (i = 0; i < nconnectors; i++) {
> + for (i = 0; i < state->num_connector; i++) {
> struct drm_connector *connector;
>
> connector = state->connectors[i];
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 91c09520aad3..cdbae7bdac70 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -845,6 +845,7 @@ struct drm_bridge {
> * @plane_states: pointer to array of plane states pointers
> * @crtcs: pointer to array of CRTC pointers
> * @crtc_states: pointer to array of CRTC states pointers
> + * @num_connector: size of the @connectors and @connector_states arrays
> * @connectors: pointer to array of connector pointers
> * @connector_states: pointer to array of connector states pointers
> * @acquire_ctx: acquire context for this atomic modeset state update
> @@ -856,6 +857,7 @@ struct drm_atomic_state {
> struct drm_plane_state **plane_states;
> struct drm_crtc **crtcs;
> struct drm_crtc_state **crtc_states;
> + int num_connector;
> struct drm_connector **connectors;
> struct drm_connector_state **connector_states;
>
> --
> 2.1.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list