[Intel-gfx] [PATCH v3] drm/i915/skl: Read out crtl1 for eDP/DPLL0

[Damien Lespiau]

v2: Put the DPLL0 state readout in skylake_get_ddi_pll(), closer to
where the PLL assignement read out is done rather than the frequency
readout function. (Daniel)

v3: Remove stray new line (Damien)
    Add Paulo's r-b tag for v1

Reviewed-by: Paulo Zanoni <paulo.r.zanoni at intel.com> (v1)
Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 853697f..1623178 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7994,12 +7994,21 @@ static void skylake_get_ddi_pll(struct drm_i915_private *dev_priv,
 				enum port port,
 				struct intel_crtc_config *pipe_config)
 {
-	u32 temp;
+	u32 temp, dpll_ctl1;
 
 	temp = I915_READ(DPLL_CTRL2) & DPLL_CTRL2_DDI_CLK_SEL_MASK(port);
 	pipe_config->ddi_pll_sel = temp >> (port * 3 + 1);
 
 	switch (pipe_config->ddi_pll_sel) {
+	case SKL_DPLL0:
+		/*
+		 * On SKL the eDP DPLL (DPLL0 as we don't use SSC) is not part
+		 * of the shared DPLL framework and thus needs to be read out
+		 * separately
+		 */
+		dpll_ctl1 = I915_READ(DPLL_CTRL1);
+		pipe_config->dpll_hw_state.ctrl1 = dpll_ctl1 & 0x3f;
+		break;
 	case SKL_DPLL1:
 		pipe_config->shared_dpll = DPLL_ID_SKL_DPLL1;
 		break;
-- 
1.8.3.1