[Intel-gfx] [PATCH 66/89] drm/i915/skl: Implementation of SKL DPLL programming
M, Satheeshakrishna
satheeshakrishna.m at intel.com
Wed Oct 1 12:52:21 CEST 2014
On 9/23/2014 11:35 PM, Paulo Zanoni wrote:
> 2014-09-04 8:27 GMT-03:00 Damien Lespiau<damien.lespiau at intel.com>:
>> From: Satheeshakrishna M<satheeshakrishna.m at intel.com>
>>
>> This patch implements SKL DPLL programming that includes:
>> - DPLL allocation
>> - wide range PLL calculation and programming
>> - DP link rate programming
>> - DDI to DPLL mapping
>>
>> v2: Incorporated following changes
>> - Added vfunc for function required outside
>> - Fixed multiple comments in WRPLL calculation
>>
>> v3: - Fix the DCO computation
>> - Move the initialization up to not clobber the computed values
>> - Use the correct macro for DP link rate programming.
>> - Use wait_for() to wait for the PLL locked bit
>>
>> v4: Rebase on top of nigthly (Damien)
>>
>> v5: A few code cleanups in the WRPLL computation (Damien)
>> - Use uint32_t when possible
>> - Use abs_diff() in the WRPLL computation
>> - Make the 64bits divisions use div64_u64()
>> - Fix typo in dco_central_feq_deviation (freq)
>> - Replace the chain of breaks with a goto
>>
>> v6: Port of the patch to work on top of the shared DPLLs (Damien)
>> v7: Don't try to handle eDP in ddi_pll_select() (Damien)
>>
>> Signed-off-by: Satheeshakrishna M<satheeshakrishna.m at intel.com> (v3)
>> Signed-off-by: Damien Lespiau<damien.lespiau at intel.com>
>> ---
>> drivers/gpu/drm/i915/intel_ddi.c | 225 ++++++++++++++++++++++++++++++++++++++-
>> 1 file changed, 224 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
>> index 439cd50..f68e04c 100644
>> --- a/drivers/gpu/drm/i915/intel_ddi.c
>> +++ b/drivers/gpu/drm/i915/intel_ddi.c
>> @@ -915,6 +915,225 @@ hsw_ddi_pll_select(struct intel_crtc *intel_crtc,
>> return true;
>> }
>>
>> +struct skl_wrpll_params {
>> + uint32_t dco_fraction;
>> + uint32_t dco_integer;
>> + uint32_t qdiv_ratio;
>> + uint32_t qdiv_mode;
>> + uint32_t kdiv;
>> + uint32_t pdiv;
>> + uint32_t central_freq;
>> +};
>> +
>> +static void
>> +skl_ddi_calculate_wrpll(int clock /* in Hz */,
>> + struct skl_wrpll_params *wrpll_params)
>> +{
>> + uint64_t afe_clock = clock * 5; /* AFE Clock is 5x Pixel clock */
>> + uint64_t dco_central_freq[3] = {8400000000, 9000000000, 9600000000};
>> + uint32_t min_dco_deviation = 400;
>> + uint32_t min_dco_index = 3;
>> + uint32_t P0[4] = {1, 2, 3, 7};
>> + uint32_t P2[4] = {1, 2, 3, 5};
>> + bool found = false;
>> + uint32_t candidate_p = 0;
>> + uint32_t candidate_p0[3] = {0}, candidate_p1[3] = {0};
>> + uint32_t candidate_p2[3] = {0};
>> + uint32_t dco_central_freq_deviation[3];
>> + uint32_t i, P1, k, dco_count;
>> + bool retry_with_odd = false;
>> + uint64_t dco_freq;
>> +
>> + /* Determine P0, P1 or P2 */
>> + for (dco_count = 0; dco_count < 3; dco_count++) {
>> + found = false;
>> + candidate_p =
>> + div64_u64(dco_central_freq[dco_count], afe_clock);
>> + if (retry_with_odd == false)
>> + candidate_p = (candidate_p % 2 == 0 ?
>> + candidate_p : candidate_p + 1);
>> +
>> + for (P1 = 1; P1 < candidate_p; P1++) {
>> + for (i = 0; i < 4; i++) {
>> + if (!(P0[i] != 1 || P1 == 1))
> I'd invert the logic of the statement above to match the spec.
That's how it was. I had to change it to avoid multiple indentation and
hence to meet max line length
>
>> + continue;
>> +
>> + for (k = 0; k < 4; k++) {
>> + if (!((P2[k] != 2 && P1 == 1) ||
>> + (P2[k] == 2)))
> This doesn't seem to match the docs. Why is the "P2[k] == 2" there?
ok, this can be simplified.
> From the bikeshedding department, there's also a minor coding style
> problem (missing "*" char in second line of comment) below, and the
> usual "is_skl" check leaving gen10+ on the same case as hsw/bdw.
>
> Everything else looks like to be according to the specs.
>
> With or without changes: Reviewed-by: Paulo Zanoni<paulo.r.zanoni at intel.com>
>
>> + continue;
>> +
>> + if (candidate_p == P0[i] * P1 * P2[k]) {
>> + /* Found possible P0, P1, P2 */
>> + found = true;
>> + candidate_p0[dco_count] = P0[i];
>> + candidate_p1[dco_count] = P1;
>> + candidate_p2[dco_count] = P2[k];
>> + goto found;
>> + }
>> +
>> + }
>> + }
>> + }
>> +
>> +found:
>> + if (found) {
>> + dco_central_freq_deviation[dco_count] =
>> + div64_u64(10000 *
>> + abs_diff((candidate_p * afe_clock),
>> + dco_central_freq[dco_count]),
>> + dco_central_freq[dco_count]);
>> +
>> + if (dco_central_freq_deviation[dco_count] <
>> + min_dco_deviation) {
>> + min_dco_deviation =
>> + dco_central_freq_deviation[dco_count];
>> + min_dco_index = dco_count;
>> + }
>> + }
>> +
>> + if (min_dco_index > 2 && dco_count == 2) {
>> + retry_with_odd = true;
>> + dco_count = 0;
>> + }
>> + }
>> +
>> + if (min_dco_index > 2) {
>> + WARN(1, "No valid values found for the given pixel clock\n");
>> + } else {
>> + wrpll_params->central_freq = dco_central_freq[min_dco_index];
>> +
>> + switch (dco_central_freq[min_dco_index]) {
>> + case 9600000000:
>> + wrpll_params->central_freq = 0;
>> + break;
>> + case 9000000000:
>> + wrpll_params->central_freq = 1;
>> + break;
>> + case 8400000000:
>> + wrpll_params->central_freq = 3;
>> + }
>> +
>> + switch (candidate_p0[min_dco_index]) {
>> + case 1:
>> + wrpll_params->pdiv = 0;
>> + break;
>> + case 2:
>> + wrpll_params->pdiv = 1;
>> + break;
>> + case 3:
>> + wrpll_params->pdiv = 2;
>> + break;
>> + case 7:
>> + wrpll_params->pdiv = 4;
>> + break;
>> + default:
>> + WARN(1, "Incorrect PDiv\n");
>> + }
>> +
>> + switch (candidate_p2[min_dco_index]) {
>> + case 5:
>> + wrpll_params->kdiv = 0;
>> + break;
>> + case 2:
>> + wrpll_params->kdiv = 1;
>> + break;
>> + case 3:
>> + wrpll_params->kdiv = 2;
>> + break;
>> + case 1:
>> + wrpll_params->kdiv = 3;
>> + break;
>> + default:
>> + WARN(1, "Incorrect KDiv\n");
>> + }
>> +
>> + wrpll_params->qdiv_ratio = candidate_p1[min_dco_index];
>> + wrpll_params->qdiv_mode =
>> + (wrpll_params->qdiv_ratio == 1) ? 0 : 1;
>> +
>> + dco_freq = candidate_p0[min_dco_index] *
>> + candidate_p1[min_dco_index] *
>> + candidate_p2[min_dco_index] * afe_clock;
>> +
>> + /* Intermediate values are in Hz.
>> + Divide by MHz to match bsepc */
>> + wrpll_params->dco_integer = div_u64(dco_freq, (24 * MHz(1)));
>> + wrpll_params->dco_fraction =
>> + div_u64(((div_u64(dco_freq, 24) -
>> + wrpll_params->dco_integer * MHz(1)) * 0x8000), MHz(1));
>> +
>> + }
>> +}
>> +
>> +
>> +static bool
>> +skl_ddi_pll_select(struct intel_crtc *intel_crtc,
>> + struct intel_encoder *intel_encoder,
>> + int clock)
>> +{
>> + struct intel_shared_dpll *pll;
>> + uint32_t ctrl1, cfgcr1, cfgcr2;
>> +
>> + /*
>> + * See comment in intel_dpll_hw_state to understand why we always use 0
>> + * as the DPLL id in this function.
>> + */
>> +
>> + ctrl1 = DPLL_CTRL1_OVERRIDE(0);
>> +
>> + if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
>> + struct skl_wrpll_params wrpll_params = { 0, };
>> +
>> + ctrl1 |= DPLL_CTRL1_HDMI_MODE(0);
>> +
>> + skl_ddi_calculate_wrpll(clock * 1000, &wrpll_params);
>> +
>> + cfgcr1 = DPLL_CFGCR1_FREQ_ENABLE |
>> + DPLL_CFGCR1_DCO_FRACTION(wrpll_params.dco_fraction) |
>> + wrpll_params.dco_integer;
>> +
>> + cfgcr2 = DPLL_CFGCR2_QDIV_RATIO(wrpll_params.qdiv_ratio) |
>> + DPLL_CFGCR2_QDIV_MODE(wrpll_params.qdiv_mode) |
>> + DPLL_CFGCR2_KDIV(wrpll_params.kdiv) |
>> + DPLL_CFGCR2_PDIV(wrpll_params.pdiv) |
>> + wrpll_params.central_freq;
>> + } else if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) {
>> + struct drm_encoder *encoder = &intel_encoder->base;
>> + struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
>> +
>> + switch (intel_dp->link_bw) {
>> + case DP_LINK_BW_1_62:
>> + ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_810, 0);
>> + break;
>> + case DP_LINK_BW_2_7:
>> + ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1350, 0);
>> + break;
>> + case DP_LINK_BW_5_4:
>> + ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2700, 0);
>> + break;
>> + }
>> +
>> + cfgcr1 = cfgcr2 = 0;
>> + } else /* eDP */
>> + return true;
>> +
>> + intel_crtc->config.dpll_hw_state.ctrl1 = ctrl1;
>> + intel_crtc->config.dpll_hw_state.cfgcr1 = cfgcr1;
>> + intel_crtc->config.dpll_hw_state.cfgcr2 = cfgcr2;
>> +
>> + pll = intel_get_shared_dpll(intel_crtc);
>> + if (pll == NULL) {
>> + DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
>> + pipe_name(intel_crtc->pipe));
>> + return false;
>> + }
>> +
>> + /* shared DPLL id 0 is DPLL 1 */
>> + intel_crtc->config.ddi_pll_sel = pll->id + 1;
>> +
>> + return true;
>> +}
>>
>> /*
>> * Tries to find a *shared* PLL for the CRTC and store it in
>> @@ -926,12 +1145,16 @@ hsw_ddi_pll_select(struct intel_crtc *intel_crtc,
>> bool intel_ddi_pll_select(struct intel_crtc *intel_crtc)
>> {
>> struct drm_crtc *crtc = &intel_crtc->base;
>> + struct drm_device *dev = crtc->dev;
>> struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
>> int clock = intel_crtc->config.port_clock;
>>
>> intel_put_shared_dpll(intel_crtc);
>>
>> - return hsw_ddi_pll_select(intel_crtc, intel_encoder, clock);
>> + if (IS_SKYLAKE(dev))
>> + return skl_ddi_pll_select(intel_crtc, intel_encoder, clock);
>> + else
>> + return hsw_ddi_pll_select(intel_crtc, intel_encoder, clock);
>> }
>>
>> void intel_ddi_set_pipe_settings(struct drm_crtc *crtc)
>> --
>> 1.8.3.1
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20141001/4f92473b/attachment.html>
More information about the Intel-gfx
mailing list