[Intel-gfx] [PATCH 4/9] drm/i915: Add check for corrupt raw EDID header for Displayport compliance testing
Paulo Zanoni
przanoni at gmail.com
Wed Apr 8 09:51:26 PDT 2015
2015-03-31 14:15 GMT-03:00 Todd Previte <tprevite at gmail.com>:
> Displayport compliance test 4.2.2.6 requires that a source device be capable of detecting
> a corrupt EDID. To do this, the test sets up an invalid EDID header to be read by the source
> device. Unfortunately, the DRM EDID reading and parsing functions are actually too good in
> this case and prevent the source from reading the corrupted EDID. The result is a failed
> compliance test.
>
> In order to successfully pass the test, the raw EDID header must be checked on each read
> to see if has been "corrupted". If an invalid raw header is detected, a flag is set that
> allows the compliance testing code to acknowledge that fact and react appropriately. The
> flag is automatically cleared on read.
>
> This code is designed to expressly work for compliance testing without disrupting normal
> operations for EDID reading and parsing.
>
> Signed-off-by: Todd Previte <tprevite at gmail.com>
> Cc: dri-devel at lists.freedesktop.org
> ---
> drivers/gpu/drm/drm_edid.c | 33 +++++++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_dp.c | 17 +++++++++++++++++
> drivers/gpu/drm/i915/intel_drv.h | 1 +
> include/drm/drm_edid.h | 5 +++++
> 4 files changed, 56 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 53bc7a6..3d4f473 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -990,6 +990,32 @@ static const u8 edid_header[] = {
> 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
> };
>
> +
> +/* Flag for EDID corruption testing
> + * Displayport Link CTS Core 1.2 rev1.1 - 4.2.2.6
> + */
> +static bool raw_edid_header_corrupted;
A static variable like this is not a good design, especially for a
module like drm.ko. If you really need this, please store it inside
some struct. But see below first.
> +
> +/**
> + * drm_raw_edid_header_valid - check to see if the raw header is
> + * corrupt or not. Used solely for Displayport compliance
> + * testing and required by Link CTS Core 1.2 rev1.1 4.2.2.6.
> + * @raw_edid: pointer to raw base EDID block
> + *
> + * Indicates whether the original EDID header as read from the
> + * device was corrupt or not. Clears on read.
> + *
> + * Return: true if the raw header was corrupt, otherwise false
> + */
> +bool drm_raw_edid_header_corrupt(void)
> +{
> + bool corrupted = raw_edid_header_corrupted;
> +
> + raw_edid_header_corrupted = 0;
> + return corrupted;
> +}
> +EXPORT_SYMBOL(drm_raw_edid_header_corrupt);
> +
> /**
> * drm_edid_header_is_valid - sanity check the header of the base EDID block
> * @raw_edid: pointer to raw base EDID block
> @@ -1006,6 +1032,13 @@ int drm_edid_header_is_valid(const u8 *raw_edid)
> if (raw_edid[i] == edid_header[i])
> score++;
>
> + if (score != 8) {
> + /* Log and set flag here for EDID corruption testing
> + * Displayport Link CTS Core 1.2 rev1.1 - 4.2.2.6
> + */
> + DRM_DEBUG_DRIVER("Raw EDID header invalid\n");
> + raw_edid_header_corrupted = 1;
> + }
The problem is that here we're limiting ourselves to just a bad edid
header, not a bad edid in general, so there are many things which we
might not get - such as a simple wrong checksum edid value. I remember
that on the previous patch you calculated the whole checksum manually,
but I don't see that code anymore. What was the reason for the change?
Also, while reviewing the patch I just discovered
connector->bad_edid_counter. Can't we just use it instead of this
patch? I mean: grab the current counter, check edid, see if the
counter moved.
> return score;
> }
> EXPORT_SYMBOL(drm_edid_header_is_valid);
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index dc87276..57f8e43 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3824,6 +3824,9 @@ update_status:
> &response, 1);
> if (status <= 0)
> DRM_DEBUG_KMS("Could not write test response to sink\n");
> +
> + /* Clear flag here, after testing is complete*/
> + intel_dp->compliance_edid_invalid = 0;
> }
>
> static int
> @@ -3896,6 +3899,10 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
> {
> struct drm_device *dev = intel_dp_to_dev(intel_dp);
> struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
> + struct drm_connector *connector = &intel_dp->attached_connector->base;
> + struct i2c_adapter *adapter = &intel_dp->aux.ddc;
> + struct edid *edid_read = NULL;
> +
> u8 sink_irq_vector;
> u8 link_status[DP_LINK_STATUS_SIZE];
>
> @@ -3912,6 +3919,16 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
> return;
> }
>
> + /* Compliance testing requires an EDID read for all HPD events
> + * Link CTS Core 1.2 rev 1.1: Test 4.2.2.1
> + * Flag set here will be handled in the EDID test function
> + */
> + edid_read = drm_get_edid(connector, adapter);
> + if (!edid_read || drm_raw_edid_header_corrupt() == 1) {
> + DRM_DEBUG_DRIVER("EDID invalid, setting flag\n");
> + intel_dp->compliance_edid_invalid = 1;
> + }
I see that on the next patch you also add a drm_get_edid() call, so we
have apparently added 2 calls for the edid test. Do we really need
both? Why is this one needed? Why is that one needed?
Also, some more ideas:
I also thought that we already automatically issued get_edid() calls
on the normal hotplug code path, so it would be a "third" call on the
codepath for the test. Can't we just rely on this one?
Another idea would be: instead of getting the edid from inside the
Kernel, we could try to get it from the user-space, using the
GetResources/GetConnector IOCTLs, and also maybe look at the EDID
properties to possibly validate the EDID (in case that edid did not
get "fixed" by the Kernel). The nice thing about this is that it would
make the test be more like a real driver usage. Do you see any
possible problems with this approach?
> +
> /* Try to read the source of the interrupt */
> if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
> intel_dp_get_sink_irq(intel_dp, &sink_irq_vector)) {
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index e7b62be..42e4251 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -651,6 +651,7 @@ struct intel_dp {
> /* Displayport compliance testing */
> unsigned long compliance_test_type;
> bool compliance_testing_active;
> + bool compliance_edid_invalid;
> };
>
> struct intel_digital_port {
> diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
> index 87d85e8..8a7eb22 100644
> --- a/include/drm/drm_edid.h
> +++ b/include/drm/drm_edid.h
> @@ -388,4 +388,9 @@ struct edid *drm_do_get_edid(struct drm_connector *connector,
> size_t len),
> void *data);
>
> +/* Check for corruption in raw EDID header - Displayport compliance
> + * Displayport Link CTS Core 1.2 rev1.1 - 4.2.2.6
> + */
> +bool drm_raw_edid_header_corrupt(void);
> +
> #endif /* __DRM_EDID_H__ */
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Paulo Zanoni
More information about the Intel-gfx
mailing list