[Intel-gfx] [PATCH i-g-t 6/6] tests/kms_chv_cursor_fail: Add a test to exercise CHV pipe C cursor fail
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Fri Dec 18 09:25:50 PST 2015
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
The test tries to anger CHV pipe C cursor by walking the edges of the
screen while moving the cursor across the screen edge.
The actual hw issue only occurs on pipe C, and only on the left screen
edge. The testcase can walk all the edges though, and on all pipes, just
so I could make sure the failure doesn't occur there.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
tests/Makefile.sources | 1 +
tests/kms_chv_cursor_fail.c | 425 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 426 insertions(+)
create mode 100644 tests/kms_chv_cursor_fail.c
diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index d5940388c483..104ed2be83ed 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -68,6 +68,7 @@ TESTS_progs_M = \
gem_write_read_ring_switch \
kms_addfb_basic \
kms_atomic \
+ kms_chv_cursor_fail \
kms_cursor_crc \
kms_draw_crc \
kms_fbc_crc \
diff --git a/tests/kms_chv_cursor_fail.c b/tests/kms_chv_cursor_fail.c
new file mode 100644
index 000000000000..2ccdd4106597
--- /dev/null
+++ b/tests/kms_chv_cursor_fail.c
@@ -0,0 +1,425 @@
+/*
+ * Copyright © 2015 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#include "igt.h"
+#include <errno.h>
+#include <limits.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+
+IGT_TEST_DESCRIPTION("Exercise CHV pipe C cursor fail");
+
+#ifndef DRM_CAP_CURSOR_WIDTH
+#define DRM_CAP_CURSOR_WIDTH 0x8
+#endif
+#ifndef DRM_CAP_CURSOR_HEIGHT
+#define DRM_CAP_CURSOR_HEIGHT 0x9
+#endif
+
+typedef struct {
+ int drm_fd;
+ igt_display_t display;
+ struct igt_fb primary_fb;
+ struct igt_fb fb;
+ igt_output_t *output;
+ enum pipe pipe;
+ igt_crc_t ref_crc;
+ int curw, curh; /* cursor size */
+ igt_pipe_crc_t *pipe_crc;
+ uint32_t devid;
+ bool colored, jump, disable;
+ int jump_x, jump_y;
+} data_t;
+
+enum {
+ EDGE_LEFT = 0x1,
+ EDGE_RIGHT = 0x2,
+ EDGE_TOP = 0x4,
+ EDGE_BOTTOM = 0x8,
+};
+
+static void cursor_disable(data_t *data)
+{
+ igt_output_t *output = data->output;
+ igt_plane_t *cursor;
+
+ cursor = igt_output_get_plane(output, IGT_PLANE_CURSOR);
+ igt_plane_set_fb(cursor, NULL);
+}
+
+static void create_cursor_fb(data_t *data, int cur_w, int cur_h)
+{
+ cairo_t *cr;
+ uint32_t fb_id;
+
+ fb_id = igt_create_fb(data->drm_fd, cur_w, cur_h,
+ DRM_FORMAT_ARGB8888,
+ LOCAL_DRM_FORMAT_MOD_NONE,
+ &data->fb);
+ igt_assert(fb_id);
+
+ cr = igt_get_cairo_ctx(data->drm_fd, &data->fb);
+ if (data->colored)
+ igt_paint_color_alpha(cr, 0, 0, data->fb.width, data->fb.height,
+ 1.0, 0.0, 0.0, 1.0);
+ else
+ igt_paint_color_alpha(cr, 0, 0, data->fb.width, data->fb.height,
+ 0.0, 0.0, 0.0, 0.0);
+ igt_assert(cairo_status(cr) == 0);
+ cairo_destroy(cr);
+}
+
+static void cursor_move(data_t *data, int x, int y, int i)
+{
+ int crtc_id = data->output->config.crtc->crtc_id;
+
+ igt_debug("[%d] x=%d, y=%d\n", i, x, y);
+
+ /*
+ * The "fixed" kernel will refuse the ioctl when pipe C cursor
+ * would straddle the left screen edge (which is when the hw
+ * fails). So let's accept a failure from the ioctl in that case.
+ */
+ igt_assert(drmModeMoveCursor(data->drm_fd, crtc_id, x, y) == 0 ||
+ (IS_CHERRYVIEW(data->devid) && data->pipe == PIPE_C &&
+ x < 0 && x > -data->curw));
+ igt_wait_for_vblank(data->drm_fd, data->pipe);
+}
+
+#define XSTEP 8
+#define YSTEP 32
+#define XOFF 0
+#define NCRC 128
+
+static void test_edge_pos(data_t *data, int sx, int ex, int y, bool swap_axis)
+{
+ igt_crc_t *crc = NULL;
+ int i, n, x, xdir;
+
+ if (sx > ex)
+ xdir = -1;
+ else
+ xdir = 1;
+
+ igt_pipe_crc_start(data->pipe_crc);
+
+ i = 0;
+ for (x = sx + XOFF; xdir * (x - ex - XOFF) <= 0; x += xdir * XSTEP) {
+ int xx, yy;
+
+ if (swap_axis) {
+ xx = y;
+ yy = x;
+ } else {
+ xx = x;
+ yy = y;
+ }
+
+ if (data->jump) {
+ cursor_move(data, data->jump_x, data->jump_y, i++);
+ }
+ if (data->disable) {
+ cursor_move(data, -data->curw, -data->curh, i++);
+ }
+ cursor_move(data, xx, yy, i++);
+ if (data->jump) {
+ cursor_move(data, data->jump_x, data->jump_y, i++);
+ }
+ if (data->disable) {
+ cursor_move(data, -data->curw, -data->curh, i++);
+ }
+ }
+
+ n = igt_pipe_crc_get_crcs(data->pipe_crc, NCRC, &crc);
+ igt_pipe_crc_stop(data->pipe_crc);
+
+ if (!data->colored) {
+ igt_debug("Checking CRCs: ");
+ for (i = 0; i < n; i++) {
+ igt_debug("[%d] ", i);
+ igt_assert_crc_equal(&data->ref_crc, &crc[i]);
+ }
+ igt_debug("\n");
+ }
+
+
+ igt_pipe_crc_start(data->pipe_crc);
+}
+
+static void test_edge(data_t *data, int sy, int ey, int sx, int ex, bool swap_axis)
+{
+ int crtc_id = data->output->config.crtc->crtc_id;
+ int y, ydir;
+
+ if (sy > ey)
+ ydir = -1;
+ else
+ ydir = 1;
+
+ igt_assert_eq(drmModeMoveCursor(data->drm_fd, crtc_id, -data->curw, -data->curh), 0);
+ igt_assert_eq(drmModeSetCursor(data->drm_fd, crtc_id, data->fb.gem_handle, data->curw, data->curh), 0);
+
+ for (y = sy; ydir * (y - ey) <= 0; ) {
+ test_edge_pos(data, sx, ex, y, swap_axis);
+ y += ydir * YSTEP;
+ test_edge_pos(data, ex, sx, y, swap_axis);
+ y += ydir * YSTEP;
+ }
+
+ igt_assert_eq(drmModeMoveCursor(data->drm_fd, crtc_id, -data->curw, -data->curh), 0);
+ igt_assert_eq(drmModeSetCursor(data->drm_fd, crtc_id, 0, data->curw, data->curh), 0);
+}
+
+static void test_edges(data_t *data, unsigned int edges)
+{
+ drmModeModeInfo *mode = igt_output_get_mode(data->output);
+
+ if (edges & EDGE_LEFT) {
+ test_edge(data, mode->vdisplay, -data->curh,
+ -data->curw, 0, false);
+ test_edge(data, -data->curh, mode->vdisplay,
+ -data->curw, 0, false);
+ }
+
+ if (edges & EDGE_RIGHT) {
+ test_edge(data, mode->vdisplay, -data->curh,
+ mode->hdisplay - data->curw, mode->hdisplay, false);
+ test_edge(data, -data->curh, mode->vdisplay,
+ mode->hdisplay - data->curw, mode->hdisplay, false);
+ }
+
+ if (edges & EDGE_TOP) {
+ test_edge(data, mode->hdisplay, -data->curw,
+ -data->curh, 0, true);
+ test_edge(data, -data->curw, mode->hdisplay,
+ -data->curh, 0, true);
+ }
+
+ if (edges & EDGE_BOTTOM) {
+ test_edge(data, mode->hdisplay, -data->curw,
+ mode->vdisplay - data->curh, mode->vdisplay, true);
+ test_edge(data, -data->curw, mode->hdisplay,
+ mode->vdisplay - data->curh, mode->vdisplay, true);
+ }
+}
+
+static bool prepare_crtc(data_t *data)
+{
+ drmModeModeInfo *mode;
+ igt_display_t *display = &data->display;
+ igt_plane_t *primary;
+
+ /* select the pipe we want to use */
+ igt_output_set_pipe(data->output, data->pipe);
+ cursor_disable(data);
+ igt_display_commit(display);
+
+ if (!data->output->valid) {
+ igt_output_set_pipe(data->output, PIPE_ANY);
+ igt_display_commit(display);
+ return false;
+ }
+
+ mode = igt_output_get_mode(data->output);
+ igt_create_pattern_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ LOCAL_DRM_FORMAT_MOD_NONE,
+ &data->primary_fb);
+
+ primary = igt_output_get_plane(data->output, IGT_PLANE_PRIMARY);
+ igt_plane_set_fb(primary, &data->primary_fb);
+
+ igt_display_commit(display);
+
+ data->jump_x = (mode->hdisplay - data->curw) / 2;
+ data->jump_y = (mode->vdisplay - data->curh) / 2;
+
+ /* create the pipe_crc object for this pipe */
+ if (data->pipe_crc)
+ igt_pipe_crc_free(data->pipe_crc);
+
+ data->pipe_crc = igt_pipe_crc_new_nonblock(data->pipe,
+ INTEL_PIPE_CRC_SOURCE_AUTO);
+
+ /* make sure cursor is disabled */
+ cursor_disable(data);
+ igt_wait_for_vblank(data->drm_fd, data->pipe);
+
+ /* get reference crc w/o cursor */
+ igt_pipe_crc_collect_crc(data->pipe_crc, &data->ref_crc);
+ igt_pipe_crc_collect_crc(data->pipe_crc, &data->ref_crc);
+ igt_pipe_crc_collect_crc(data->pipe_crc, &data->ref_crc);
+
+ return true;
+}
+
+static void cleanup_crtc(data_t *data)
+{
+ igt_display_t *display = &data->display;
+ igt_plane_t *primary;
+
+ igt_pipe_crc_free(data->pipe_crc);
+ data->pipe_crc = NULL;
+
+ igt_remove_fb(data->drm_fd, &data->primary_fb);
+
+ primary = igt_output_get_plane(data->output, IGT_PLANE_PRIMARY);
+ igt_plane_set_fb(primary, NULL);
+
+ igt_output_set_pipe(data->output, PIPE_ANY);
+ igt_display_commit(display);
+}
+
+static void test_crtc(data_t *data, unsigned int edges)
+{
+ igt_display_t *display = &data->display;
+ int valid_tests = 0;
+
+ create_cursor_fb(data, data->curw, data->curh);
+
+ for_each_connected_output(display, data->output) {
+ if (!prepare_crtc(data))
+ continue;
+
+ valid_tests++;
+
+ igt_info("Beginning %s on pipe %s, connector %s\n",
+ igt_subtest_name(),
+ kmstest_pipe_name(data->pipe),
+ igt_output_name(data->output));
+
+ test_edges(data, edges);
+
+ igt_info("\n%s on pipe %s, connector %s: PASSED\n\n",
+ igt_subtest_name(),
+ kmstest_pipe_name(data->pipe),
+ igt_output_name(data->output));
+
+ /* cleanup what prepare_crtc() has done */
+ cleanup_crtc(data);
+ }
+
+ igt_remove_fb(data->drm_fd, &data->fb);
+
+ igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
+}
+
+static int opt_handler(int opt, int opt_index, void *_data)
+{
+ data_t *data = _data;
+
+ switch (opt) {
+ case 'c':
+ data->colored = true;
+ break;
+ case 'd':
+ data->disable = true;
+ break;
+ case 'j':
+ data->jump = true;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static data_t data;
+static uint64_t max_curw = 64, max_curh = 64;
+
+int main(int argc, char **argv)
+{
+ static const struct option long_opts[] = {
+ { .name = "colored", .val = 'c' },
+ { .name = "disable", .val = 'd'},
+ { .name = "jump", .val = 'j' },
+ {}
+ };
+ static const char *help_str =
+ " --colored\t\tUse a colored cursor (disables CRC checks)\n"
+ " --disable\t\tDisable the cursor between each step\n"
+ " --jump\t\tJump the cursor to middle of the screen between each step)\n";
+
+ igt_subtest_init_parse_opts(&argc, argv, "", long_opts, help_str,
+ opt_handler, &data);
+
+ igt_skip_on_simulation();
+
+ igt_fixture {
+ int ret;
+
+ data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
+
+ data.devid = intel_get_drm_devid(data.drm_fd);
+
+ ret = drmGetCap(data.drm_fd, DRM_CAP_CURSOR_WIDTH, &max_curw);
+ igt_assert(ret == 0 || errno == EINVAL);
+ /* Not making use of cursor_height since it is same as width, still reading */
+ ret = drmGetCap(data.drm_fd, DRM_CAP_CURSOR_HEIGHT, &max_curh);
+ igt_assert(ret == 0 || errno == EINVAL);
+
+ kmstest_set_vt_graphics_mode();
+
+ igt_require_pipe_crc();
+
+ igt_display_init(&data.display, data.drm_fd);
+ }
+
+ for (data.curw = 64; data.curw <= 256; data.curw *= 2) {
+ data.curh = data.curw;
+ for (data.pipe = PIPE_A; data.pipe <= PIPE_C; data.pipe++) {
+ igt_subtest_f("pipe-%s-%dx%d-left-edge",
+ kmstest_pipe_name(data.pipe),
+ data.curw, data.curh) {
+ igt_require(data.curw <= max_curw && data.curh <= max_curh);
+ test_crtc(&data, EDGE_LEFT);
+ }
+ igt_subtest_f("pipe-%s-%dx%d-right-edge",
+ kmstest_pipe_name(data.pipe),
+ data.curw, data.curh) {
+ igt_require(data.curw <= max_curw && data.curh <= max_curh);
+ test_crtc(&data, EDGE_RIGHT);
+ }
+ igt_subtest_f("pipe-%s-%dx%d-top-edge",
+ kmstest_pipe_name(data.pipe),
+ data.curw, data.curh) {
+ igt_require(data.curw <= max_curw && data.curh <= max_curh);
+ test_crtc(&data, EDGE_TOP);
+ }
+ igt_subtest_f("pipe-%s-%dx%d-bottom-edge",
+ kmstest_pipe_name(data.pipe),
+ data.curw, data.curh) {
+ igt_require(data.curw <= max_curw && data.curh <= max_curh);
+ test_crtc(&data, EDGE_BOTTOM);
+ }
+ }
+ }
+
+ igt_fixture
+ igt_display_fini(&data.display);
+
+ igt_exit();
+}
--
2.4.10
More information about the Intel-gfx
mailing list