[Intel-gfx] [PATCH i-g-t 6/6] tests/kms_chv_cursor_fail: Add a test to exercise CHV pipe C cursor fail
Thomas Wood
thomas.wood at intel.com
Mon Dec 21 02:42:53 PST 2015
On 18 December 2015 at 17:25, <ville.syrjala at linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> The test tries to anger CHV pipe C cursor by walking the edges of the
> screen while moving the cursor across the screen edge.
>
> The actual hw issue only occurs on pipe C, and only on the left screen
> edge. The testcase can walk all the edges though, and on all pipes, just
> so I could make sure the failure doesn't occur there.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> tests/Makefile.sources | 1 +
> tests/kms_chv_cursor_fail.c | 425 ++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 426 insertions(+)
> create mode 100644 tests/kms_chv_cursor_fail.c
>
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index d5940388c483..104ed2be83ed 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -68,6 +68,7 @@ TESTS_progs_M = \
> gem_write_read_ring_switch \
> kms_addfb_basic \
> kms_atomic \
> + kms_chv_cursor_fail \
> kms_cursor_crc \
> kms_draw_crc \
> kms_fbc_crc \
> diff --git a/tests/kms_chv_cursor_fail.c b/tests/kms_chv_cursor_fail.c
> new file mode 100644
> index 000000000000..2ccdd4106597
> --- /dev/null
> +++ b/tests/kms_chv_cursor_fail.c
> @@ -0,0 +1,425 @@
> +/*
> + * Copyright © 2015 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + */
> +
> +#include "igt.h"
> +#include <errno.h>
> +#include <limits.h>
> +#include <stdbool.h>
> +#include <stdio.h>
> +#include <string.h>
> +
> +IGT_TEST_DESCRIPTION("Exercise CHV pipe C cursor fail");
> +
> +#ifndef DRM_CAP_CURSOR_WIDTH
> +#define DRM_CAP_CURSOR_WIDTH 0x8
> +#endif
> +#ifndef DRM_CAP_CURSOR_HEIGHT
> +#define DRM_CAP_CURSOR_HEIGHT 0x9
> +#endif
> +
> +typedef struct {
> + int drm_fd;
> + igt_display_t display;
> + struct igt_fb primary_fb;
> + struct igt_fb fb;
> + igt_output_t *output;
> + enum pipe pipe;
> + igt_crc_t ref_crc;
> + int curw, curh; /* cursor size */
> + igt_pipe_crc_t *pipe_crc;
> + uint32_t devid;
> + bool colored, jump, disable;
> + int jump_x, jump_y;
> +} data_t;
> +
> +enum {
> + EDGE_LEFT = 0x1,
> + EDGE_RIGHT = 0x2,
> + EDGE_TOP = 0x4,
> + EDGE_BOTTOM = 0x8,
> +};
> +
> +static void cursor_disable(data_t *data)
> +{
> + igt_output_t *output = data->output;
> + igt_plane_t *cursor;
> +
> + cursor = igt_output_get_plane(output, IGT_PLANE_CURSOR);
> + igt_plane_set_fb(cursor, NULL);
> +}
> +
> +static void create_cursor_fb(data_t *data, int cur_w, int cur_h)
> +{
> + cairo_t *cr;
> + uint32_t fb_id;
> +
> + fb_id = igt_create_fb(data->drm_fd, cur_w, cur_h,
> + DRM_FORMAT_ARGB8888,
> + LOCAL_DRM_FORMAT_MOD_NONE,
> + &data->fb);
> + igt_assert(fb_id);
> +
> + cr = igt_get_cairo_ctx(data->drm_fd, &data->fb);
> + if (data->colored)
> + igt_paint_color_alpha(cr, 0, 0, data->fb.width, data->fb.height,
> + 1.0, 0.0, 0.0, 1.0);
> + else
> + igt_paint_color_alpha(cr, 0, 0, data->fb.width, data->fb.height,
> + 0.0, 0.0, 0.0, 0.0);
> + igt_assert(cairo_status(cr) == 0);
> + cairo_destroy(cr);
> +}
> +
> +static void cursor_move(data_t *data, int x, int y, int i)
> +{
> + int crtc_id = data->output->config.crtc->crtc_id;
> +
> + igt_debug("[%d] x=%d, y=%d\n", i, x, y);
> +
> + /*
> + * The "fixed" kernel will refuse the ioctl when pipe C cursor
> + * would straddle the left screen edge (which is when the hw
> + * fails). So let's accept a failure from the ioctl in that case.
> + */
> + igt_assert(drmModeMoveCursor(data->drm_fd, crtc_id, x, y) == 0 ||
> + (IS_CHERRYVIEW(data->devid) && data->pipe == PIPE_C &&
> + x < 0 && x > -data->curw));
> + igt_wait_for_vblank(data->drm_fd, data->pipe);
> +}
> +
> +#define XSTEP 8
> +#define YSTEP 32
> +#define XOFF 0
> +#define NCRC 128
> +
> +static void test_edge_pos(data_t *data, int sx, int ex, int y, bool swap_axis)
> +{
> + igt_crc_t *crc = NULL;
> + int i, n, x, xdir;
> +
> + if (sx > ex)
> + xdir = -1;
> + else
> + xdir = 1;
> +
> + igt_pipe_crc_start(data->pipe_crc);
> +
> + i = 0;
> + for (x = sx + XOFF; xdir * (x - ex - XOFF) <= 0; x += xdir * XSTEP) {
> + int xx, yy;
> +
> + if (swap_axis) {
> + xx = y;
> + yy = x;
> + } else {
> + xx = x;
> + yy = y;
> + }
> +
> + if (data->jump) {
> + cursor_move(data, data->jump_x, data->jump_y, i++);
> + }
> + if (data->disable) {
> + cursor_move(data, -data->curw, -data->curh, i++);
> + }
> + cursor_move(data, xx, yy, i++);
> + if (data->jump) {
> + cursor_move(data, data->jump_x, data->jump_y, i++);
> + }
> + if (data->disable) {
> + cursor_move(data, -data->curw, -data->curh, i++);
> + }
> + }
> +
> + n = igt_pipe_crc_get_crcs(data->pipe_crc, NCRC, &crc);
> + igt_pipe_crc_stop(data->pipe_crc);
> +
> + if (!data->colored) {
> + igt_debug("Checking CRCs: ");
> + for (i = 0; i < n; i++) {
> + igt_debug("[%d] ", i);
> + igt_assert_crc_equal(&data->ref_crc, &crc[i]);
> + }
> + igt_debug("\n");
> + }
> +
> +
> + igt_pipe_crc_start(data->pipe_crc);
> +}
> +
> +static void test_edge(data_t *data, int sy, int ey, int sx, int ex, bool swap_axis)
> +{
> + int crtc_id = data->output->config.crtc->crtc_id;
> + int y, ydir;
> +
> + if (sy > ey)
> + ydir = -1;
> + else
> + ydir = 1;
> +
> + igt_assert_eq(drmModeMoveCursor(data->drm_fd, crtc_id, -data->curw, -data->curh), 0);
> + igt_assert_eq(drmModeSetCursor(data->drm_fd, crtc_id, data->fb.gem_handle, data->curw, data->curh), 0);
> +
> + for (y = sy; ydir * (y - ey) <= 0; ) {
> + test_edge_pos(data, sx, ex, y, swap_axis);
> + y += ydir * YSTEP;
> + test_edge_pos(data, ex, sx, y, swap_axis);
> + y += ydir * YSTEP;
> + }
> +
> + igt_assert_eq(drmModeMoveCursor(data->drm_fd, crtc_id, -data->curw, -data->curh), 0);
> + igt_assert_eq(drmModeSetCursor(data->drm_fd, crtc_id, 0, data->curw, data->curh), 0);
> +}
> +
> +static void test_edges(data_t *data, unsigned int edges)
> +{
> + drmModeModeInfo *mode = igt_output_get_mode(data->output);
> +
> + if (edges & EDGE_LEFT) {
> + test_edge(data, mode->vdisplay, -data->curh,
> + -data->curw, 0, false);
> + test_edge(data, -data->curh, mode->vdisplay,
> + -data->curw, 0, false);
> + }
> +
> + if (edges & EDGE_RIGHT) {
> + test_edge(data, mode->vdisplay, -data->curh,
> + mode->hdisplay - data->curw, mode->hdisplay, false);
> + test_edge(data, -data->curh, mode->vdisplay,
> + mode->hdisplay - data->curw, mode->hdisplay, false);
> + }
> +
> + if (edges & EDGE_TOP) {
> + test_edge(data, mode->hdisplay, -data->curw,
> + -data->curh, 0, true);
> + test_edge(data, -data->curw, mode->hdisplay,
> + -data->curh, 0, true);
> + }
> +
> + if (edges & EDGE_BOTTOM) {
> + test_edge(data, mode->hdisplay, -data->curw,
> + mode->vdisplay - data->curh, mode->vdisplay, true);
> + test_edge(data, -data->curw, mode->hdisplay,
> + mode->vdisplay - data->curh, mode->vdisplay, true);
> + }
> +}
> +
> +static bool prepare_crtc(data_t *data)
> +{
> + drmModeModeInfo *mode;
> + igt_display_t *display = &data->display;
> + igt_plane_t *primary;
> +
> + /* select the pipe we want to use */
> + igt_output_set_pipe(data->output, data->pipe);
> + cursor_disable(data);
> + igt_display_commit(display);
> +
> + if (!data->output->valid) {
> + igt_output_set_pipe(data->output, PIPE_ANY);
> + igt_display_commit(display);
> + return false;
> + }
> +
> + mode = igt_output_get_mode(data->output);
> + igt_create_pattern_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
> + DRM_FORMAT_XRGB8888,
> + LOCAL_DRM_FORMAT_MOD_NONE,
> + &data->primary_fb);
> +
> + primary = igt_output_get_plane(data->output, IGT_PLANE_PRIMARY);
> + igt_plane_set_fb(primary, &data->primary_fb);
> +
> + igt_display_commit(display);
> +
> + data->jump_x = (mode->hdisplay - data->curw) / 2;
> + data->jump_y = (mode->vdisplay - data->curh) / 2;
> +
> + /* create the pipe_crc object for this pipe */
> + if (data->pipe_crc)
> + igt_pipe_crc_free(data->pipe_crc);
> +
> + data->pipe_crc = igt_pipe_crc_new_nonblock(data->pipe,
> + INTEL_PIPE_CRC_SOURCE_AUTO);
> +
> + /* make sure cursor is disabled */
> + cursor_disable(data);
> + igt_wait_for_vblank(data->drm_fd, data->pipe);
> +
> + /* get reference crc w/o cursor */
> + igt_pipe_crc_collect_crc(data->pipe_crc, &data->ref_crc);
> + igt_pipe_crc_collect_crc(data->pipe_crc, &data->ref_crc);
> + igt_pipe_crc_collect_crc(data->pipe_crc, &data->ref_crc);
> +
> + return true;
> +}
> +
> +static void cleanup_crtc(data_t *data)
> +{
> + igt_display_t *display = &data->display;
> + igt_plane_t *primary;
> +
> + igt_pipe_crc_free(data->pipe_crc);
> + data->pipe_crc = NULL;
> +
> + igt_remove_fb(data->drm_fd, &data->primary_fb);
> +
> + primary = igt_output_get_plane(data->output, IGT_PLANE_PRIMARY);
> + igt_plane_set_fb(primary, NULL);
> +
> + igt_output_set_pipe(data->output, PIPE_ANY);
> + igt_display_commit(display);
> +}
> +
> +static void test_crtc(data_t *data, unsigned int edges)
> +{
> + igt_display_t *display = &data->display;
> + int valid_tests = 0;
> +
> + create_cursor_fb(data, data->curw, data->curh);
> +
> + for_each_connected_output(display, data->output) {
> + if (!prepare_crtc(data))
> + continue;
> +
> + valid_tests++;
> +
> + igt_info("Beginning %s on pipe %s, connector %s\n",
> + igt_subtest_name(),
> + kmstest_pipe_name(data->pipe),
> + igt_output_name(data->output));
> +
> + test_edges(data, edges);
> +
> + igt_info("\n%s on pipe %s, connector %s: PASSED\n\n",
> + igt_subtest_name(),
> + kmstest_pipe_name(data->pipe),
> + igt_output_name(data->output));
> +
> + /* cleanup what prepare_crtc() has done */
> + cleanup_crtc(data);
> + }
> +
> + igt_remove_fb(data->drm_fd, &data->fb);
> +
> + igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
> +}
> +
> +static int opt_handler(int opt, int opt_index, void *_data)
> +{
> + data_t *data = _data;
> +
> + switch (opt) {
> + case 'c':
> + data->colored = true;
> + break;
> + case 'd':
> + data->disable = true;
> + break;
> + case 'j':
> + data->jump = true;
> + break;
> + default:
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static data_t data;
> +static uint64_t max_curw = 64, max_curh = 64;
> +
> +int main(int argc, char **argv)
> +{
> + static const struct option long_opts[] = {
> + { .name = "colored", .val = 'c' },
> + { .name = "disable", .val = 'd'},
> + { .name = "jump", .val = 'j' },
> + {}
> + };
> + static const char *help_str =
> + " --colored\t\tUse a colored cursor (disables CRC checks)\n"
> + " --disable\t\tDisable the cursor between each step\n"
> + " --jump\t\tJump the cursor to middle of the screen between each step)\n";
> +
> + igt_subtest_init_parse_opts(&argc, argv, "", long_opts, help_str,
> + opt_handler, &data);
> +
> + igt_skip_on_simulation();
> +
> + igt_fixture {
> + int ret;
> +
> + data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
> +
> + data.devid = intel_get_drm_devid(data.drm_fd);
Should there be an igt_require(IS_CHERRYVIEW(data.devid)) check here?
> +
> + ret = drmGetCap(data.drm_fd, DRM_CAP_CURSOR_WIDTH, &max_curw);
> + igt_assert(ret == 0 || errno == EINVAL);
> + /* Not making use of cursor_height since it is same as width, still reading */
> + ret = drmGetCap(data.drm_fd, DRM_CAP_CURSOR_HEIGHT, &max_curh);
> + igt_assert(ret == 0 || errno == EINVAL);
> +
> + kmstest_set_vt_graphics_mode();
> +
> + igt_require_pipe_crc();
> +
> + igt_display_init(&data.display, data.drm_fd);
> + }
> +
> + for (data.curw = 64; data.curw <= 256; data.curw *= 2) {
> + data.curh = data.curw;
> + for (data.pipe = PIPE_A; data.pipe <= PIPE_C; data.pipe++) {
This test is just for pipes A and B?
> + igt_subtest_f("pipe-%s-%dx%d-left-edge",
> + kmstest_pipe_name(data.pipe),
> + data.curw, data.curh) {
> + igt_require(data.curw <= max_curw && data.curh <= max_curh);
> + test_crtc(&data, EDGE_LEFT);
> + }
> + igt_subtest_f("pipe-%s-%dx%d-right-edge",
> + kmstest_pipe_name(data.pipe),
> + data.curw, data.curh) {
> + igt_require(data.curw <= max_curw && data.curh <= max_curh);
> + test_crtc(&data, EDGE_RIGHT);
> + }
> + igt_subtest_f("pipe-%s-%dx%d-top-edge",
> + kmstest_pipe_name(data.pipe),
> + data.curw, data.curh) {
> + igt_require(data.curw <= max_curw && data.curh <= max_curh);
> + test_crtc(&data, EDGE_TOP);
> + }
> + igt_subtest_f("pipe-%s-%dx%d-bottom-edge",
> + kmstest_pipe_name(data.pipe),
> + data.curw, data.curh) {
> + igt_require(data.curw <= max_curw && data.curh <= max_curh);
> + test_crtc(&data, EDGE_BOTTOM);
> + }
> + }
> + }
> +
> + igt_fixture
> + igt_display_fini(&data.display);
> +
> + igt_exit();
> +}
> --
> 2.4.10
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list