[Intel-gfx] [PATCH 5/7] drm/i915/skl: Updated the gen9_enable_rps function
akash.goel at intel.com
akash.goel at intel.com
Fri Feb 6 06:56:36 PST 2015
From: Akash Goel <akash.goel at intel.com>
On SKL, GT frequency is programmed in units of 16.66 MHZ units compared
to 50 MHZ for older platforms. Also the time value specified for Up/Down EI &
Up/Down thresholds are expressed in units of 1.33 us, compared to 1.28
us for older platforms. So updated the gen9_enable_rps function as per that.
Signed-off-by: Akash Goel <akash.goel at intel.com>
---
drivers/gpu/drm/i915/intel_pm.c | 41 ++++++++++++++++++++++++++++++++---------
1 file changed, 32 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index db24b48..865df1f 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4037,27 +4037,50 @@ static void gen6_init_rps_frequencies(struct drm_device *dev)
static void gen9_enable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 threshold_up_pct, threshold_down_pct;
+ u32 ei_up, ei_down;
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
gen6_init_rps_frequencies(dev);
- I915_WRITE(GEN6_RPNSWREQ, 0xc800000);
- I915_WRITE(GEN6_RC_VIDEO_FREQ, 0xc800000);
+ /* Program defaults and thresholds for RPS*/
+ I915_WRITE(GEN6_RPNSWREQ,
+ GEN9_FREQUENCY(dev_priv->rps.rp1_freq * GEN9_FREQ_SCALER));
+ I915_WRITE(GEN6_RC_VIDEO_FREQ,
+ GEN9_FREQUENCY(dev_priv->rps.rp1_freq * GEN9_FREQ_SCALER));
+
+ ei_up = 84480; /* 84.48ms */
+ ei_down = 448000;
+ threshold_up_pct = 90; /* x% */
+ threshold_down_pct = 70;
+
+ I915_WRITE(GEN6_RP_UP_EI,
+ GT_FREQ_FROM_PERIOD(ei_up, dev));
+ I915_WRITE(GEN6_RP_UP_THRESHOLD,
+ GT_FREQ_FROM_PERIOD((ei_up * threshold_up_pct / 100), dev));
+
+ I915_WRITE(GEN6_RP_DOWN_EI,
+ GT_FREQ_FROM_PERIOD(ei_down, dev));
+ I915_WRITE(GEN6_RP_DOWN_THRESHOLD,
+ GT_FREQ_FROM_PERIOD((ei_down * threshold_down_pct / 100), dev));
+
+ /* 1 second timeout*/
+ I915_WRITE(GEN6_RP_DOWN_TIMEOUT, GT_FREQ_FROM_PERIOD(1000000, dev));
+
+ I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
+ (dev_priv->rps.max_freq_softlimit * GEN9_FREQ_SCALER) << 23 |
+ (dev_priv->rps.min_freq_softlimit * GEN9_FREQ_SCALER) << 14);
- I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 0xf4240);
- I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, 0x12060000);
- I915_WRITE(GEN6_RP_UP_THRESHOLD, 0xe808);
- I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 0x3bd08);
- I915_WRITE(GEN6_RP_UP_EI, 0x101d0);
- I915_WRITE(GEN6_RP_DOWN_EI, 0x55730);
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 0xa);
- I915_WRITE(GEN6_PMINTRMSK, 0x6);
I915_WRITE(GEN6_RP_CONTROL, GEN6_RP_MEDIA_TURBO |
GEN6_RP_MEDIA_HW_MODE | GEN6_RP_MEDIA_IS_GFX |
GEN6_RP_ENABLE | GEN6_RP_UP_BUSY_AVG |
GEN6_RP_DOWN_IDLE_AVG);
+ dev_priv->rps.power = HIGH_POWER; /* force a reset */
+ gen6_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit);
+
gen6_enable_rps_interrupts(dev);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
--
1.9.2
More information about the Intel-gfx
mailing list