[Intel-gfx] [PATCH v2 1/3] drm/i915/chv: Populate total EU count on Cherryview

Daniel Vetter daniel at ffwll.ch
Mon Jan 19 01:44:24 PST 2015


On Fri, Jan 16, 2015 at 08:42:16PM +0530, deepak.s at linux.intel.com wrote:
> From: Deepak S <deepak.s at linux.intel.com>
> 
> Starting with Cherryview, devices may have a varying number of EU for
> a given ID due to creative fusing. Punit support different frequency for
> different fuse data. We use this patch to help get total eu enabled and
> read the right offset to get RP0
> 
> Based upon a patch from Jeff, but reworked to only store eu_total and
> avoid sending info to userspace
> 
> v2: Format register definitions (Jani)
> 
> Signed-off-by: Deepak S <deepak.s at linux.intel.com>
> Signed-off-by: Jeff McGee <jeff.mcgee at intel.com>

This isn't really how sob works. The last line _must_ be the person who
last touched the patch, otherwise you're doing it wrong. Since this patch
doesn't seem to be from Jeff I've dropped his sobline and converted to an
ack.

Really if you just want to acknowledge people who have contributed to a
patch (e.g. you've based your patch on some version of theirs) do that in
the commit message + Cc:
-Daniel

> ---
>  drivers/gpu/drm/i915/i915_dma.c | 11 +++++++++++
>  drivers/gpu/drm/i915/i915_drv.h |  1 +
>  drivers/gpu/drm/i915/i915_reg.h | 11 +++++++++++
>  3 files changed, 23 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
> index 2447de3..b868e9d 100644
> --- a/drivers/gpu/drm/i915/i915_dma.c
> +++ b/drivers/gpu/drm/i915/i915_dma.c
> @@ -601,6 +601,17 @@ static void intel_device_info_runtime_init(struct drm_device *dev)
>  			info->num_pipes = 0;
>  		}
>  	}
> +
> +	if (IS_CHERRYVIEW(dev)) {
> +		u32 fuse, mask_eu;
> +
> +		fuse = I915_READ(CHV_FUSE_GT);
> +		mask_eu = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
> +				  CHV_FGT_EU_DIS_SS0_R1_MASK |
> +				  CHV_FGT_EU_DIS_SS1_R0_MASK |
> +				  CHV_FGT_EU_DIS_SS1_R1_MASK);
> +		info->eu_total = 16 - hweight32(mask_eu);
> +	}
>  }
>  
>  /**
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 66f0c60..ab1fa9e 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -653,6 +653,7 @@ struct intel_device_info {
>  	int trans_offsets[I915_MAX_TRANSCODERS];
>  	int palette_offsets[I915_MAX_PIPES];
>  	int cursor_offsets[I915_MAX_PIPES];
> +	unsigned int eu_total;
>  };
>  
>  #undef DEFINE_FLAG
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index a39bb03..d9692f9 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -1471,6 +1471,17 @@ enum punit_power_well {
>  #define   GEN8_RC_SEMA_IDLE_MSG_DISABLE	(1 << 12)
>  #define   GEN8_FF_DOP_CLOCK_GATE_DISABLE	(1<<10)
>  
> +/* Fuse readout registers for GT */
> +#define CHV_FUSE_GT			(VLV_DISPLAY_BASE + 0x2168)
> +#define   CHV_FGT_EU_DIS_SS0_R0_SHIFT	16
> +#define   CHV_FGT_EU_DIS_SS0_R0_MASK	(0xf << CHV_FGT_EU_DIS_SS0_R0_SHIFT)
> +#define   CHV_FGT_EU_DIS_SS0_R1_SHIFT	20
> +#define   CHV_FGT_EU_DIS_SS0_R1_MASK	(0xf << CHV_FGT_EU_DIS_SS0_R1_SHIFT)
> +#define   CHV_FGT_EU_DIS_SS1_R0_SHIFT	24
> +#define   CHV_FGT_EU_DIS_SS1_R0_MASK	(0xf << CHV_FGT_EU_DIS_SS1_R0_SHIFT)
> +#define   CHV_FGT_EU_DIS_SS1_R1_SHIFT	28
> +#define   CHV_FGT_EU_DIS_SS1_R1_MASK	(0xf << CHV_FGT_EU_DIS_SS1_R1_SHIFT)
> +
>  #define GEN6_BSD_SLEEP_PSMI_CONTROL	0x12050
>  #define   GEN6_BSD_SLEEP_MSG_DISABLE	(1 << 0)
>  #define   GEN6_BSD_SLEEP_FLUSH_DISABLE	(1 << 2)
> -- 
> 1.9.1
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch


More information about the Intel-gfx mailing list