[Intel-gfx] [PATCH v3] drm/i915/bxt: BUNs related to port PLL
Kannan, Vandana
vandana.kannan at intel.com
Mon Jul 6 01:08:44 PDT 2015
Hi Daniel,
Is there any other change required in this patch to consider before merge?
Please let me know.
- Vandana
On 7/3/2015 10:23 AM, Kannan, Vandana wrote:
> Hi,
>
> Any other review comments on this patch? Do let me know.
> Siva and Sonika have given their R-b.
>
> Thanks,
> Vandana
>
> On 7/1/2015 4:41 PM, Sivakumar Thulasimani wrote:
>> thanks for the changes.
>>
>> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani at intel.com>
>>
>>
>>
>> On 7/1/2015 5:02 PM, Vandana Kannan wrote:
>>> This patch contains changes based on 2 updates to the spec:
>>> Port PLL VCO restriction raised up to 6700.
>>> Port PLL now needs DCO amp override enable for all VCO frequencies.
>>>
>>> v2: Sonika's review comment addressed
>>> - dcoampovr_en_h variable not required
>>> Based on a discussion with Siva, the following changes have been made.
>>> - replace dco_amp var with #define BXT_DCO_AMPLITUDE
>>> - set pll10 in a single assignment
>>>
>>> v3:
>>> Move DCO amplitude default value to i915_reg.h. Suggested by Siva.
>>>
>>> Signed-off-by: Vandana Kannan<vandana.kannan at intel.com>
>>> Reviewed-by: Sonika Jindal<sonika.jindal at intel.com> [v2]
>>> ---
>>> drivers/gpu/drm/i915/i915_reg.h | 1 +
>>> drivers/gpu/drm/i915/intel_ddi.c | 15 +++++----------
>>> drivers/gpu/drm/i915/intel_display.c | 2 +-
>>> 3 files changed, 7 insertions(+), 11 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/i915/i915_reg.h
>>> b/drivers/gpu/drm/i915/i915_reg.h
>>> index ac985c5..d1b8928 100644
>>> --- a/drivers/gpu/drm/i915/i915_reg.h
>>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>>> @@ -1211,6 +1211,7 @@ enum skl_disp_power_wells {
>>> #define PORT_PLL_LOCK_THRESHOLD_MASK 0xe
>>> /* PORT_PLL_10_A */
>>> #define PORT_PLL_DCO_AMP_OVR_EN_H (1<<27)
>>> +#define PORT_PLL_DCO_AMP_DEFAULT 15
>>> #define PORT_PLL_DCO_AMP_MASK 0x3c00
>>> #define PORT_PLL_DCO_AMP(x) (x<<10)
>>> #define _PORT_PLL_BASE(port) _PORT3(port, _PORT_PLL_0_A, \
>>> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
>>> b/drivers/gpu/drm/i915/intel_ddi.c
>>> index 42c1487..9c05cc0 100644
>>> --- a/drivers/gpu/drm/i915/intel_ddi.c
>>> +++ b/drivers/gpu/drm/i915/intel_ddi.c
>>> @@ -1455,7 +1455,7 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
>>> struct bxt_clk_div clk_div = {0};
>>> int vco = 0;
>>> uint32_t prop_coef, int_coef, gain_ctl, targ_cnt;
>>> - uint32_t dcoampovr_en_h, dco_amp, lanestagger;
>>> + uint32_t lanestagger;
>>>
>>> if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
>>> intel_clock_t best_clock;
>>> @@ -1494,9 +1494,7 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
>>> vco = clock * 10 / 2 * clk_div.p1 * clk_div.p2;
>>> }
>>>
>>> - dco_amp = 15;
>>> - dcoampovr_en_h = 0;
>>> - if (vco >= 6200000 && vco <= 6480000) {
>>> + if (vco >= 6200000 && vco <= 6700000) {
>>> prop_coef = 4;
>>> int_coef = 9;
>>> gain_ctl = 3;
>>> @@ -1507,8 +1505,6 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
>>> int_coef = 11;
>>> gain_ctl = 3;
>>> targ_cnt = 9;
>>> - if (vco >= 4800000 && vco < 5400000)
>>> - dcoampovr_en_h = 1;
>>> } else if (vco == 5400000) {
>>> prop_coef = 3;
>>> int_coef = 8;
>>> @@ -1550,10 +1546,9 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
>>>
>>> crtc_state->dpll_hw_state.pll8 = targ_cnt;
>>>
>>> - if (dcoampovr_en_h)
>>> - crtc_state->dpll_hw_state.pll10 = PORT_PLL_DCO_AMP_OVR_EN_H;
>>> -
>>> - crtc_state->dpll_hw_state.pll10 |= PORT_PLL_DCO_AMP(dco_amp);
>>> + crtc_state->dpll_hw_state.pll10 =
>>> + PORT_PLL_DCO_AMP(PORT_PLL_DCO_AMP_DEFAULT)
>>> + | PORT_PLL_DCO_AMP_OVR_EN_H;
>>>
>>> crtc_state->dpll_hw_state.pcsdw12 =
>>> LANESTAGGER_STRAP_OVRD | lanestagger;
>>> diff --git a/drivers/gpu/drm/i915/intel_display.c
>>> b/drivers/gpu/drm/i915/intel_display.c
>>> index eb665d7..e04be45 100644
>>> --- a/drivers/gpu/drm/i915/intel_display.c
>>> +++ b/drivers/gpu/drm/i915/intel_display.c
>>> @@ -409,7 +409,7 @@ static const intel_limit_t intel_limits_chv = {
>>> static const intel_limit_t intel_limits_bxt = {
>>> /* FIXME: find real dot limits */
>>> .dot = { .min = 0, .max = INT_MAX },
>>> - .vco = { .min = 4800000, .max = 6480000 },
>>> + .vco = { .min = 4800000, .max = 6700000 },
>>> .n = { .min = 1, .max = 1 },
>>> .m1 = { .min = 2, .max = 2 },
>>> /* FIXME: find real m2 limits */
>>
>> --
>> regards,
>> Sivakumar
>>
More information about the Intel-gfx
mailing list