[Intel-gfx] [PATCH 7/7] drm/i915: Kill intel_dp->{link_bw, rate_select}
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Mon Jul 6 05:10:06 PDT 2015
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
We only need the link_bw/rate_select parameters when starting link
training, and they should be computed based on the currently active
config, so throw them out from intel_dp and just compute on demand.
Toss in an extra debug print to see rate_select in addition to link_bw,
as the latter may be 0 for eDP 1.4.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 39 ++++++++++++++++++++++++-------------
drivers/gpu/drm/i915/intel_dp_mst.c | 13 ++-----------
drivers/gpu/drm/i915/intel_drv.h | 2 --
3 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 46b734b..e88cec2 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1342,6 +1342,19 @@ int intel_dp_rate_select(struct intel_dp *intel_dp, int rate)
return rate_to_index(rate, intel_dp->sink_rates);
}
+static void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock,
+ uint8_t *link_bw, uint8_t *rate_select)
+{
+ if (intel_dp->num_sink_rates) {
+ *link_bw = 0;
+ *rate_select =
+ intel_dp_rate_select(intel_dp, port_clock);
+ } else {
+ *link_bw = drm_dp_link_rate_to_bw_code(port_clock);
+ *rate_select = 0;
+ }
+}
+
bool
intel_dp_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
@@ -1363,6 +1376,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
int link_avail, link_clock;
int common_rates[DP_MAX_SUPPORTED_RATES] = {};
int common_len;
+ uint8_t link_bw, rate_select;
common_len = intel_dp_common_rates(intel_dp, common_rates);
@@ -1464,21 +1478,14 @@ found:
pipe_config->lane_count = lane_count;
- if (intel_dp->num_sink_rates) {
- intel_dp->link_bw = 0;
- intel_dp->rate_select =
- intel_dp_rate_select(intel_dp, common_rates[clock]);
- } else {
- intel_dp->link_bw =
- drm_dp_link_rate_to_bw_code(common_rates[clock]);
- intel_dp->rate_select = 0;
- }
-
pipe_config->pipe_bpp = bpp;
pipe_config->port_clock = common_rates[clock];
- DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n",
- intel_dp->link_bw, pipe_config->lane_count,
+ intel_dp_compute_rate(intel_dp, pipe_config->port_clock,
+ &link_bw, &rate_select);
+
+ DRM_DEBUG_KMS("DP link bw %02x rate select %02x lane count %d clock %d bpp %d\n",
+ link_bw, rate_select, pipe_config->lane_count,
pipe_config->port_clock, bpp);
DRM_DEBUG_KMS("DP link bw required %i available %i\n",
mode_rate, link_avail);
@@ -3587,19 +3594,23 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
int voltage_tries, loop_tries;
uint32_t DP = intel_dp->DP;
uint8_t link_config[2];
+ uint8_t link_bw, rate_select;
if (HAS_DDI(dev))
intel_ddi_prepare_link_retrain(encoder);
+ intel_dp_compute_rate(intel_dp, crtc->config->port_clock,
+ &link_bw, &rate_select);
+
/* Write the link configuration data */
- link_config[0] = intel_dp->link_bw;
+ link_config[0] = link_bw;
link_config[1] = crtc->config->lane_count;
if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2);
if (intel_dp->num_sink_rates)
drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_RATE_SET,
- &intel_dp->rate_select, 1);
+ &rate_select, 1);
link_config[0] = 0;
link_config[1] = DP_SET_ANSI_8B10B;
diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
index eeda730..3dc08da 100644
--- a/drivers/gpu/drm/i915/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/intel_dp_mst.c
@@ -38,7 +38,7 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
struct intel_dp *intel_dp = &intel_dig_port->dp;
struct drm_atomic_state *state;
int bpp, i;
- int lane_count, slots, rate;
+ int lane_count, slots;
struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
struct drm_connector *drm_connector;
struct intel_connector *connector, *found = NULL;
@@ -55,20 +55,11 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
*/
lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
- rate = intel_dp_max_link_rate(intel_dp);
-
- if (intel_dp->num_sink_rates) {
- intel_dp->link_bw = 0;
- intel_dp->rate_select = intel_dp_rate_select(intel_dp, rate);
- } else {
- intel_dp->link_bw = drm_dp_link_rate_to_bw_code(rate);
- intel_dp->rate_select = 0;
- }
pipe_config->lane_count = lane_count;
pipe_config->pipe_bpp = 24;
- pipe_config->port_clock = rate;
+ pipe_config->port_clock = intel_dp_max_link_rate(intel_dp);
state = pipe_config->base.state;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 703b394..709de50 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -718,8 +718,6 @@ struct intel_dp {
enum hdmi_force_audio force_audio;
bool limited_color_range;
bool color_range_auto;
- uint8_t link_bw;
- uint8_t rate_select;
uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS];
--
2.3.6
More information about the Intel-gfx
mailing list