[Intel-gfx] [PATCH 2/7] drm/i915: Don't use link_bw for PLL setup
Sivakumar Thulasimani
sivakumar.thulasimani at intel.com
Tue Jul 7 01:05:36 PDT 2015
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani at intel.com>
On 7/6/2015 5:40 PM, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Use port_clock instead of link_bw when picking the PLL parameters for
> DP. link_bw may be zero with an eDP 1.4 sink that supports
> DP_LINK_RATE_SET so we shouln't use it for anything other than feed it
shouldn't ?
> to the sink appropriately.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_ddi.c | 11 ++++------
> drivers/gpu/drm/i915/intel_dp.c | 44 ++++++++++++++++++++--------------------
> 2 files changed, 26 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 9a40bfb..0d3cc98 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1574,17 +1574,14 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,
> DPLL_CFGCR2_PDIV(wrpll_params.pdiv) |
> wrpll_params.central_freq;
> } else if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) {
> - struct drm_encoder *encoder = &intel_encoder->base;
> - struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> -
> - switch (intel_dp->link_bw) {
> - case DP_LINK_BW_1_62:
> + switch (crtc_state->port_clock / 2) {
> + case 81000:
> ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, 0);
> break;
> - case DP_LINK_BW_2_7:
> + case 135000:
> ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, 0);
> break;
> - case DP_LINK_BW_5_4:
> + case 270000:
> ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, 0);
> break;
> }
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index decefa1..3dd4342 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -48,28 +48,28 @@
> #define INTEL_DP_RESOLUTION_FAILSAFE (3 << INTEL_DP_RESOLUTION_SHIFT_MASK)
>
> struct dp_link_dpll {
> - int link_bw;
> + int clock;
> struct dpll dpll;
> };
>
> static const struct dp_link_dpll gen4_dpll[] = {
> - { DP_LINK_BW_1_62,
> + { 162000,
> { .p1 = 2, .p2 = 10, .n = 2, .m1 = 23, .m2 = 8 } },
> - { DP_LINK_BW_2_7,
> + { 270000,
> { .p1 = 1, .p2 = 10, .n = 1, .m1 = 14, .m2 = 2 } }
> };
>
> static const struct dp_link_dpll pch_dpll[] = {
> - { DP_LINK_BW_1_62,
> + { 162000,
> { .p1 = 2, .p2 = 10, .n = 1, .m1 = 12, .m2 = 9 } },
> - { DP_LINK_BW_2_7,
> + { 270000,
> { .p1 = 1, .p2 = 10, .n = 2, .m1 = 14, .m2 = 8 } }
> };
>
> static const struct dp_link_dpll vlv_dpll[] = {
> - { DP_LINK_BW_1_62,
> + { 162000,
> { .p1 = 3, .p2 = 2, .n = 5, .m1 = 3, .m2 = 81 } },
> - { DP_LINK_BW_2_7,
> + { 270000,
> { .p1 = 2, .p2 = 2, .n = 1, .m1 = 2, .m2 = 27 } }
> };
>
> @@ -83,11 +83,11 @@ static const struct dp_link_dpll chv_dpll[] = {
> * m2 is stored in fixed point format using formula below
> * (m2_int << 22) | m2_fraction
> */
> - { DP_LINK_BW_1_62, /* m2_int = 32, m2_fraction = 1677722 */
> + { 162000, /* m2_int = 32, m2_fraction = 1677722 */
> { .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } },
> - { DP_LINK_BW_2_7, /* m2_int = 27, m2_fraction = 0 */
> + { 270000, /* m2_int = 27, m2_fraction = 0 */
> { .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } },
> - { DP_LINK_BW_5_4, /* m2_int = 27, m2_fraction = 0 */
> + { 540000, /* m2_int = 27, m2_fraction = 0 */
> { .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
> };
>
> @@ -1099,7 +1099,7 @@ intel_dp_connector_unregister(struct intel_connector *intel_connector)
> }
>
> static void
> -skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_clock)
> +skl_edp_set_pll_config(struct intel_crtc_state *pipe_config)
> {
> u32 ctrl1;
>
> @@ -1111,7 +1111,7 @@ skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_clock)
> pipe_config->dpll_hw_state.cfgcr2 = 0;
>
> ctrl1 = DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
> - switch (link_clock / 2) {
> + switch (pipe_config->port_clock / 2) {
> case 81000:
> ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
> SKL_DPLL0);
> @@ -1145,19 +1145,19 @@ skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_clock)
> }
>
> static void
> -hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config, int link_bw)
> +hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config)
> {
> memset(&pipe_config->dpll_hw_state, 0,
> sizeof(pipe_config->dpll_hw_state));
>
> - switch (link_bw) {
> - case DP_LINK_BW_1_62:
> + switch (pipe_config->port_clock / 2) {
> + case 81000:
> pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
> break;
> - case DP_LINK_BW_2_7:
> + case 135000:
> pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
> break;
> - case DP_LINK_BW_5_4:
> + case 270000:
> pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
> break;
> }
> @@ -1204,7 +1204,7 @@ intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
>
> static void
> intel_dp_set_clock(struct intel_encoder *encoder,
> - struct intel_crtc_state *pipe_config, int link_bw)
> + struct intel_crtc_state *pipe_config)
> {
> struct drm_device *dev = encoder->base.dev;
> const struct dp_link_dpll *divisor = NULL;
> @@ -1226,7 +1226,7 @@ intel_dp_set_clock(struct intel_encoder *encoder,
>
> if (divisor && count) {
> for (i = 0; i < count; i++) {
> - if (link_bw == divisor[i].link_bw) {
> + if (pipe_config->port_clock == divisor[i].clock) {
> pipe_config->dpll = divisor[i].dpll;
> pipe_config->clock_set = true;
> break;
> @@ -1498,13 +1498,13 @@ found:
> }
>
> if (IS_SKYLAKE(dev) && is_edp(intel_dp))
> - skl_edp_set_pll_config(pipe_config, common_rates[clock]);
> + skl_edp_set_pll_config(pipe_config);
> else if (IS_BROXTON(dev))
> /* handled in ddi */;
> else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
> - hsw_dp_set_ddi_pll_sel(pipe_config, intel_dp->link_bw);
> + hsw_dp_set_ddi_pll_sel(pipe_config);
> else
> - intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
> + intel_dp_set_clock(encoder, pipe_config);
>
> return true;
> }
--
regards,
Sivakumar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20150707/405a4cb9/attachment-0001.html>
More information about the Intel-gfx
mailing list