[Intel-gfx] [PATCH 3/7] drm/i915: Don't pass clock to DDI PLL select functions

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

All the *_ddi_pll_select() functions get passed the port_clock and pipe
config as parameters. We only need to pass the pipe config, and the
functions can dig up the port_clock themselves.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_ddi.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 0d3cc98..96fb472 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1262,9 +1262,10 @@ hsw_ddi_calculate_wrpll(int clock /* in Hz */,
 static bool
 hsw_ddi_pll_select(struct intel_crtc *intel_crtc,
 		   struct intel_crtc_state *crtc_state,
-		   struct intel_encoder *intel_encoder,
-		   int clock)
+		   struct intel_encoder *intel_encoder)
 {
+	int clock = crtc_state->port_clock;
+
 	if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
 		struct intel_shared_dpll *pll;
 		uint32_t val;
@@ -1543,11 +1544,11 @@ skip_remaining_dividers:
 static bool
 skl_ddi_pll_select(struct intel_crtc *intel_crtc,
 		   struct intel_crtc_state *crtc_state,
-		   struct intel_encoder *intel_encoder,
-		   int clock)
+		   struct intel_encoder *intel_encoder)
 {
 	struct intel_shared_dpll *pll;
 	uint32_t ctrl1, cfgcr1, cfgcr2;
+	int clock = crtc_state->port_clock;
 
 	/*
 	 * See comment in intel_dpll_hw_state to understand why we always use 0
@@ -1635,14 +1636,14 @@ static const struct bxt_clk_div bxt_dp_clk_val[] = {
 static bool
 bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
 		   struct intel_crtc_state *crtc_state,
-		   struct intel_encoder *intel_encoder,
-		   int clock)
+		   struct intel_encoder *intel_encoder)
 {
 	struct intel_shared_dpll *pll;
 	struct bxt_clk_div clk_div = {0};
 	int vco = 0;
 	uint32_t prop_coef, int_coef, gain_ctl, targ_cnt;
 	uint32_t lanestagger;
+	int clock = crtc_state->port_clock;
 
 	if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
 		intel_clock_t best_clock;
@@ -1770,17 +1771,16 @@ bool intel_ddi_pll_select(struct intel_crtc *intel_crtc,
 	struct drm_device *dev = intel_crtc->base.dev;
 	struct intel_encoder *intel_encoder =
 		intel_ddi_get_crtc_new_encoder(crtc_state);
-	int clock = crtc_state->port_clock;
 
 	if (IS_SKYLAKE(dev))
 		return skl_ddi_pll_select(intel_crtc, crtc_state,
-					  intel_encoder, clock);
+					  intel_encoder);
 	else if (IS_BROXTON(dev))
 		return bxt_ddi_pll_select(intel_crtc, crtc_state,
-					  intel_encoder, clock);
+					  intel_encoder);
 	else
 		return hsw_ddi_pll_select(intel_crtc, crtc_state,
-					  intel_encoder, clock);
+					  intel_encoder);
 }
 
 void intel_ddi_set_pipe_settings(struct drm_crtc *crtc)
-- 
2.3.6