[Intel-gfx] [PATCH v2 07/12] drm/i915: Get rid of dpms handling.
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Mon Jul 27 05:35:36 PDT 2015
This is now done completely atomically.
Keep connectors_active for now, but make it mirror crtc_state->active.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
drivers/gpu/drm/i915/intel_crt.c | 49 +-----------------
drivers/gpu/drm/i915/intel_display.c | 99 +-----------------------------------
drivers/gpu/drm/i915/intel_dp.c | 2 +-
drivers/gpu/drm/i915/intel_dp_mst.c | 2 +-
drivers/gpu/drm/i915/intel_drv.h | 3 --
drivers/gpu/drm/i915/intel_dsi.c | 2 +-
drivers/gpu/drm/i915/intel_dvo.c | 46 +----------------
drivers/gpu/drm/i915/intel_hdmi.c | 2 +-
drivers/gpu/drm/i915/intel_lvds.c | 2 +-
drivers/gpu/drm/i915/intel_sdvo.c | 47 +----------------
drivers/gpu/drm/i915/intel_tv.c | 2 +-
11 files changed, 11 insertions(+), 245 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 9eba3dd5b434..af5e43bef4a4 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -236,53 +236,6 @@ static void intel_enable_crt(struct intel_encoder *encoder)
intel_crt_set_dpms(encoder, crt->connector->base.dpms);
}
-/* Special dpms function to support cloning between dvo/sdvo/crt. */
-static int intel_crt_dpms(struct drm_connector *connector, int mode)
-{
- struct drm_device *dev = connector->dev;
- struct intel_encoder *encoder = intel_attached_encoder(connector);
- struct drm_crtc *crtc;
- int old_dpms;
-
- /* PCH platforms and VLV only support on/off. */
- if (INTEL_INFO(dev)->gen >= 5 && mode != DRM_MODE_DPMS_ON)
- mode = DRM_MODE_DPMS_OFF;
-
- if (mode == connector->dpms)
- return 0;
-
- old_dpms = connector->dpms;
- connector->dpms = mode;
-
- /* Only need to change hw state when actually enabled */
- crtc = encoder->base.crtc;
- if (!crtc) {
- encoder->connectors_active = false;
- return 0;
- }
-
- /* We need the pipe to run for anything but OFF. */
- if (mode == DRM_MODE_DPMS_OFF)
- encoder->connectors_active = false;
- else
- encoder->connectors_active = true;
-
- /* We call connector dpms manually below in case pipe dpms doesn't
- * change due to cloning. */
- if (mode < old_dpms) {
- /* From off to on, enable the pipe first. */
- intel_crtc_update_dpms(crtc);
-
- intel_crt_set_dpms(encoder, mode);
- } else {
- intel_crt_set_dpms(encoder, mode);
-
- intel_crtc_update_dpms(crtc);
- }
-
- return 0;
-}
-
static enum drm_mode_status
intel_crt_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
@@ -798,7 +751,7 @@ static void intel_crt_reset(struct drm_connector *connector)
static const struct drm_connector_funcs intel_crt_connector_funcs = {
.reset = intel_crt_reset,
- .dpms = intel_crt_dpms,
+ .dpms = drm_atomic_helper_connector_dpms,
.detect = intel_crt_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = intel_crt_destroy,
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e3afe611a78c..ed9eba2666e2 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6271,67 +6271,6 @@ free:
return ret;
}
-/* Master function to enable/disable CRTC and corresponding power wells */
-int intel_crtc_control(struct drm_crtc *crtc, bool enable)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_mode_config *config = &dev->mode_config;
- struct drm_modeset_acquire_ctx *ctx = config->acquire_ctx;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct intel_crtc_state *pipe_config;
- struct drm_atomic_state *state;
- int ret;
-
- if (enable == intel_crtc->active)
- return 0;
-
- if (enable && !crtc->state->enable)
- return 0;
-
- /* this function should be called with drm_modeset_lock_all for now */
- if (WARN_ON(!ctx))
- return -EIO;
- lockdep_assert_held(&ctx->ww_ctx);
-
- state = drm_atomic_state_alloc(dev);
- if (WARN_ON(!state))
- return -ENOMEM;
-
- state->acquire_ctx = ctx;
- state->allow_modeset = true;
-
- pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
- if (IS_ERR(pipe_config)) {
- ret = PTR_ERR(pipe_config);
- goto err;
- }
- pipe_config->base.active = enable;
-
- ret = drm_atomic_commit(state);
- if (!ret)
- return ret;
-
-err:
- DRM_ERROR("Updating crtc active failed with %i\n", ret);
- drm_atomic_state_free(state);
- return ret;
-}
-
-/**
- * Sets the power management mode of the pipe and plane.
- */
-void intel_crtc_update_dpms(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct intel_encoder *intel_encoder;
- bool enable = false;
-
- for_each_encoder_on_crtc(dev, crtc, intel_encoder)
- enable |= intel_encoder->connectors_active;
-
- intel_crtc_control(crtc, enable);
-}
-
void intel_encoder_destroy(struct drm_encoder *encoder)
{
struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
@@ -6340,22 +6279,6 @@ void intel_encoder_destroy(struct drm_encoder *encoder)
kfree(intel_encoder);
}
-/* Simple dpms helper for encoders with just one connector, no cloning and only
- * one kind of off state. It clamps all !ON modes to fully OFF and changes the
- * state of the entire output pipe. */
-static void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
-{
- if (mode == DRM_MODE_DPMS_ON) {
- encoder->connectors_active = true;
-
- intel_crtc_update_dpms(encoder->base.crtc);
- } else {
- encoder->connectors_active = false;
-
- intel_crtc_update_dpms(encoder->base.crtc);
- }
-}
-
/* Cross check the actual hw state with our own modeset state tracking (and it's
* internal consistency). */
static void intel_connector_check_state(struct intel_connector *connector)
@@ -6385,6 +6308,8 @@ static void intel_connector_check_state(struct intel_connector *connector)
I915_STATE_WARN(conn_state->crtc != encoder->crtc,
"attached encoder crtc differs from connector crtc\n");
} else {
+ I915_STATE_WARN(crtc && crtc->state->active,
+ "attached crtc is active, but connector isn't\n");
I915_STATE_WARN(!crtc && connector->base.state->best_encoder,
"best encoder set without crtc!\n");
}
@@ -6418,26 +6343,6 @@ struct intel_connector *intel_connector_alloc(void)
return connector;
}
-/* Even simpler default implementation, if there's really no special case to
- * consider. */
-int intel_connector_dpms(struct drm_connector *connector, int mode)
-{
- /* All the simple cases only support two dpms states. */
- if (mode != DRM_MODE_DPMS_ON)
- mode = DRM_MODE_DPMS_OFF;
-
- if (mode == connector->dpms)
- return 0;
-
- connector->dpms = mode;
-
- /* Only need to change hw state when actually enabled */
- if (connector->encoder)
- intel_encoder_dpms(to_intel_encoder(connector->encoder), mode);
-
- return 0;
-}
-
/* Simple connector->get_hw_state implementation for encoders that support only
* one connector and no cloning and hence the encoder state determines the state
* of the connector. */
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index f1b9f939b435..cea7d1785d13 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4824,7 +4824,7 @@ static void intel_dp_encoder_reset(struct drm_encoder *encoder)
}
static const struct drm_connector_funcs intel_dp_connector_funcs = {
- .dpms = intel_connector_dpms,
+ .dpms = drm_atomic_helper_connector_dpms,
.detect = intel_dp_detect,
.force = intel_dp_force,
.fill_modes = drm_helper_probe_single_connector_modes,
diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
index 35f2eb59818a..4bc371d19b91 100644
--- a/drivers/gpu/drm/i915/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/intel_dp_mst.c
@@ -328,7 +328,7 @@ intel_dp_mst_connector_destroy(struct drm_connector *connector)
}
static const struct drm_connector_funcs intel_dp_mst_connector_funcs = {
- .dpms = intel_connector_dpms,
+ .dpms = drm_atomic_helper_connector_dpms,
.detect = intel_dp_mst_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.set_property = intel_dp_mst_set_property,
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 0da4236dc85a..62073d2f83fa 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -992,12 +992,9 @@ void intel_mark_busy(struct drm_device *dev);
void intel_mark_idle(struct drm_device *dev);
void intel_crtc_restore_mode(struct drm_crtc *crtc);
int intel_display_suspend(struct drm_device *dev);
-int intel_crtc_control(struct drm_crtc *crtc, bool enable);
-void intel_crtc_update_dpms(struct drm_crtc *crtc);
void intel_encoder_destroy(struct drm_encoder *encoder);
int intel_connector_init(struct intel_connector *);
struct intel_connector *intel_connector_alloc(void);
-int intel_connector_dpms(struct drm_connector *, int mode);
bool intel_connector_get_hw_state(struct intel_connector *connector);
bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
struct intel_digital_port *port);
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 18dd7d7360a0..4a601cf90f16 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -982,7 +982,7 @@ static const struct drm_connector_helper_funcs intel_dsi_connector_helper_funcs
};
static const struct drm_connector_funcs intel_dsi_connector_funcs = {
- .dpms = intel_connector_dpms,
+ .dpms = drm_atomic_helper_connector_dpms,
.detect = intel_dsi_detect,
.destroy = intel_dsi_connector_destroy,
.fill_modes = drm_helper_probe_single_connector_modes,
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 600f7fb855d8..dc532bb61d22 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -196,50 +196,6 @@ static void intel_enable_dvo(struct intel_encoder *encoder)
intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
}
-/* Special dpms function to support cloning between dvo/sdvo/crt. */
-static int intel_dvo_dpms(struct drm_connector *connector, int mode)
-{
- struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
- struct drm_crtc *crtc;
- struct intel_crtc_state *config;
-
- /* dvo supports only 2 dpms states. */
- if (mode != DRM_MODE_DPMS_ON)
- mode = DRM_MODE_DPMS_OFF;
-
- if (mode == connector->dpms)
- return 0;
-
- connector->dpms = mode;
-
- /* Only need to change hw state when actually enabled */
- crtc = intel_dvo->base.base.crtc;
- if (!crtc) {
- intel_dvo->base.connectors_active = false;
- return 0;
- }
-
- /* We call connector dpms manually below in case pipe dpms doesn't
- * change due to cloning. */
- if (mode == DRM_MODE_DPMS_ON) {
- config = to_intel_crtc(crtc)->config;
-
- intel_dvo->base.connectors_active = true;
-
- intel_crtc_update_dpms(crtc);
-
- intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
- } else {
- intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
-
- intel_dvo->base.connectors_active = false;
-
- intel_crtc_update_dpms(crtc);
- }
-
- return 0;
-}
-
static enum drm_mode_status
intel_dvo_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
@@ -387,7 +343,7 @@ static void intel_dvo_destroy(struct drm_connector *connector)
}
static const struct drm_connector_funcs intel_dvo_connector_funcs = {
- .dpms = intel_dvo_dpms,
+ .dpms = drm_atomic_helper_connector_dpms,
.detect = intel_dvo_detect,
.destroy = intel_dvo_destroy,
.fill_modes = drm_helper_probe_single_connector_modes,
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 70bad5bf1d48..51cbea8247fe 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1909,7 +1909,7 @@ static void intel_hdmi_destroy(struct drm_connector *connector)
}
static const struct drm_connector_funcs intel_hdmi_connector_funcs = {
- .dpms = intel_connector_dpms,
+ .dpms = drm_atomic_helper_connector_dpms,
.detect = intel_hdmi_detect,
.force = intel_hdmi_force,
.fill_modes = drm_helper_probe_single_connector_modes,
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index cb634f48e7d9..881b5d13592e 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -549,7 +549,7 @@ static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs
};
static const struct drm_connector_funcs intel_lvds_connector_funcs = {
- .dpms = intel_connector_dpms,
+ .dpms = drm_atomic_helper_connector_dpms,
.detect = intel_lvds_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.set_property = intel_lvds_set_property,
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 8911e0e417ee..c98098e884cc 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1508,51 +1508,6 @@ static void intel_enable_sdvo(struct intel_encoder *encoder)
intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
}
-/* Special dpms function to support cloning between dvo/sdvo/crt. */
-static int intel_sdvo_dpms(struct drm_connector *connector, int mode)
-{
- struct drm_crtc *crtc;
- struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
-
- /* dvo supports only 2 dpms states. */
- if (mode != DRM_MODE_DPMS_ON)
- mode = DRM_MODE_DPMS_OFF;
-
- if (mode == connector->dpms)
- return 0;
-
- connector->dpms = mode;
-
- /* Only need to change hw state when actually enabled */
- crtc = intel_sdvo->base.base.crtc;
- if (!crtc) {
- intel_sdvo->base.connectors_active = false;
- return 0;
- }
-
- /* We set active outputs manually below in case pipe dpms doesn't change
- * due to cloning. */
- if (mode != DRM_MODE_DPMS_ON) {
- intel_sdvo_set_active_outputs(intel_sdvo, 0);
- if (0)
- intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
-
- intel_sdvo->base.connectors_active = false;
-
- intel_crtc_update_dpms(crtc);
- } else {
- intel_sdvo->base.connectors_active = true;
-
- intel_crtc_update_dpms(crtc);
-
- if (0)
- intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
- intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
- }
-
- return 0;
-}
-
static enum drm_mode_status
intel_sdvo_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
@@ -2190,7 +2145,7 @@ done:
}
static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
- .dpms = intel_sdvo_dpms,
+ .dpms = drm_atomic_helper_connector_dpms,
.detect = intel_sdvo_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.set_property = intel_sdvo_set_property,
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 8b9d325bda3c..0568ae6ec9dd 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1509,7 +1509,7 @@ out:
}
static const struct drm_connector_funcs intel_tv_connector_funcs = {
- .dpms = intel_connector_dpms,
+ .dpms = drm_atomic_helper_connector_dpms,
.detect = intel_tv_detect,
.destroy = intel_tv_destroy,
.set_property = intel_tv_set_property,
--
2.1.0
More information about the Intel-gfx
mailing list