[Intel-gfx] [PATCH v2 07/12] drm/i915: Get rid of dpms handling.

Ander Conselvan De Oliveira conselvan2 at gmail.com
Fri Jul 31 02:40:37 PDT 2015


Reviewed-by: Ander Conselvan de Oliveira <conselvan2 at gmail.com>

On Mon, 2015-07-27 at 14:35 +0200, Maarten Lankhorst wrote:
> This is now done completely atomically.
> Keep connectors_active for now, but make it mirror crtc_state->active.
> 
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/intel_crt.c     | 49 +-----------------
>  drivers/gpu/drm/i915/intel_display.c | 99 +-----------------------------------
>  drivers/gpu/drm/i915/intel_dp.c      |  2 +-
>  drivers/gpu/drm/i915/intel_dp_mst.c  |  2 +-
>  drivers/gpu/drm/i915/intel_drv.h     |  3 --
>  drivers/gpu/drm/i915/intel_dsi.c     |  2 +-
>  drivers/gpu/drm/i915/intel_dvo.c     | 46 +----------------
>  drivers/gpu/drm/i915/intel_hdmi.c    |  2 +-
>  drivers/gpu/drm/i915/intel_lvds.c    |  2 +-
>  drivers/gpu/drm/i915/intel_sdvo.c    | 47 +----------------
>  drivers/gpu/drm/i915/intel_tv.c      |  2 +-
>  11 files changed, 11 insertions(+), 245 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
> index 9eba3dd5b434..af5e43bef4a4 100644
> --- a/drivers/gpu/drm/i915/intel_crt.c
> +++ b/drivers/gpu/drm/i915/intel_crt.c
> @@ -236,53 +236,6 @@ static void intel_enable_crt(struct intel_encoder *encoder)
>  	intel_crt_set_dpms(encoder, crt->connector->base.dpms);
>  }
>  
> -/* Special dpms function to support cloning between dvo/sdvo/crt. */
> -static int intel_crt_dpms(struct drm_connector *connector, int mode)
> -{
> -	struct drm_device *dev = connector->dev;
> -	struct intel_encoder *encoder = intel_attached_encoder(connector);
> -	struct drm_crtc *crtc;
> -	int old_dpms;
> -
> -	/* PCH platforms and VLV only support on/off. */
> -	if (INTEL_INFO(dev)->gen >= 5 && mode != DRM_MODE_DPMS_ON)
> -		mode = DRM_MODE_DPMS_OFF;
> -
> -	if (mode == connector->dpms)
> -		return 0;
> -
> -	old_dpms = connector->dpms;
> -	connector->dpms = mode;
> -
> -	/* Only need to change hw state when actually enabled */
> -	crtc = encoder->base.crtc;
> -	if (!crtc) {
> -		encoder->connectors_active = false;
> -		return 0;
> -	}
> -
> -	/* We need the pipe to run for anything but OFF. */
> -	if (mode == DRM_MODE_DPMS_OFF)
> -		encoder->connectors_active = false;
> -	else
> -		encoder->connectors_active = true;
> -
> -	/* We call connector dpms manually below in case pipe dpms doesn't
> -	 * change due to cloning. */
> -	if (mode < old_dpms) {
> -		/* From off to on, enable the pipe first. */
> -		intel_crtc_update_dpms(crtc);
> -
> -		intel_crt_set_dpms(encoder, mode);
> -	} else {
> -		intel_crt_set_dpms(encoder, mode);
> -
> -		intel_crtc_update_dpms(crtc);
> -	}
> -
> -	return 0;
> -}
> -
>  static enum drm_mode_status
>  intel_crt_mode_valid(struct drm_connector *connector,
>  		     struct drm_display_mode *mode)
> @@ -798,7 +751,7 @@ static void intel_crt_reset(struct drm_connector *connector)
>  
>  static const struct drm_connector_funcs intel_crt_connector_funcs = {
>  	.reset = intel_crt_reset,
> -	.dpms = intel_crt_dpms,
> +	.dpms = drm_atomic_helper_connector_dpms,
>  	.detect = intel_crt_detect,
>  	.fill_modes = drm_helper_probe_single_connector_modes,
>  	.destroy = intel_crt_destroy,
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index e3afe611a78c..ed9eba2666e2 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -6271,67 +6271,6 @@ free:
>  	return ret;
>  }
>  
> -/* Master function to enable/disable CRTC and corresponding power wells */
> -int intel_crtc_control(struct drm_crtc *crtc, bool enable)
> -{
> -	struct drm_device *dev = crtc->dev;
> -	struct drm_mode_config *config = &dev->mode_config;
> -	struct drm_modeset_acquire_ctx *ctx = config->acquire_ctx;
> -	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> -	struct intel_crtc_state *pipe_config;
> -	struct drm_atomic_state *state;
> -	int ret;
> -
> -	if (enable == intel_crtc->active)
> -		return 0;
> -
> -	if (enable && !crtc->state->enable)
> -		return 0;
> -
> -	/* this function should be called with drm_modeset_lock_all for now */
> -	if (WARN_ON(!ctx))
> -		return -EIO;
> -	lockdep_assert_held(&ctx->ww_ctx);
> -
> -	state = drm_atomic_state_alloc(dev);
> -	if (WARN_ON(!state))
> -		return -ENOMEM;
> -
> -	state->acquire_ctx = ctx;
> -	state->allow_modeset = true;
> -
> -	pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
> -	if (IS_ERR(pipe_config)) {
> -		ret = PTR_ERR(pipe_config);
> -		goto err;
> -	}
> -	pipe_config->base.active = enable;
> -
> -	ret = drm_atomic_commit(state);
> -	if (!ret)
> -		return ret;
> -
> -err:
> -	DRM_ERROR("Updating crtc active failed with %i\n", ret);
> -	drm_atomic_state_free(state);
> -	return ret;
> -}
> -
> -/**
> - * Sets the power management mode of the pipe and plane.
> - */
> -void intel_crtc_update_dpms(struct drm_crtc *crtc)
> -{
> -	struct drm_device *dev = crtc->dev;
> -	struct intel_encoder *intel_encoder;
> -	bool enable = false;
> -
> -	for_each_encoder_on_crtc(dev, crtc, intel_encoder)
> -		enable |= intel_encoder->connectors_active;
> -
> -	intel_crtc_control(crtc, enable);
> -}
> -
>  void intel_encoder_destroy(struct drm_encoder *encoder)
>  {
>  	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
> @@ -6340,22 +6279,6 @@ void intel_encoder_destroy(struct drm_encoder *encoder)
>  	kfree(intel_encoder);
>  }
>  
> -/* Simple dpms helper for encoders with just one connector, no cloning and only
> - * one kind of off state. It clamps all !ON modes to fully OFF and changes the
> - * state of the entire output pipe. */
> -static void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
> -{
> -	if (mode == DRM_MODE_DPMS_ON) {
> -		encoder->connectors_active = true;
> -
> -		intel_crtc_update_dpms(encoder->base.crtc);
> -	} else {
> -		encoder->connectors_active = false;
> -
> -		intel_crtc_update_dpms(encoder->base.crtc);
> -	}
> -}
> -
>  /* Cross check the actual hw state with our own modeset state tracking (and it's
>   * internal consistency). */
>  static void intel_connector_check_state(struct intel_connector *connector)
> @@ -6385,6 +6308,8 @@ static void intel_connector_check_state(struct intel_connector *connector)
>  		I915_STATE_WARN(conn_state->crtc != encoder->crtc,
>  			"attached encoder crtc differs from connector crtc\n");
>  	} else {
> +		I915_STATE_WARN(crtc && crtc->state->active,
> +			"attached crtc is active, but connector isn't\n");
>  		I915_STATE_WARN(!crtc && connector->base.state->best_encoder,
>  			"best encoder set without crtc!\n");
>  	}
> @@ -6418,26 +6343,6 @@ struct intel_connector *intel_connector_alloc(void)
>  	return connector;
>  }
>  
> -/* Even simpler default implementation, if there's really no special case to
> - * consider. */
> -int intel_connector_dpms(struct drm_connector *connector, int mode)
> -{
> -	/* All the simple cases only support two dpms states. */
> -	if (mode != DRM_MODE_DPMS_ON)
> -		mode = DRM_MODE_DPMS_OFF;
> -
> -	if (mode == connector->dpms)
> -		return 0;
> -
> -	connector->dpms = mode;
> -
> -	/* Only need to change hw state when actually enabled */
> -	if (connector->encoder)
> -		intel_encoder_dpms(to_intel_encoder(connector->encoder), mode);
> -
> -	return 0;
> -}
> -
>  /* Simple connector->get_hw_state implementation for encoders that support only
>   * one connector and no cloning and hence the encoder state determines the state
>   * of the connector. */
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index f1b9f939b435..cea7d1785d13 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -4824,7 +4824,7 @@ static void intel_dp_encoder_reset(struct drm_encoder *encoder)
>  }
>  
>  static const struct drm_connector_funcs intel_dp_connector_funcs = {
> -	.dpms = intel_connector_dpms,
> +	.dpms = drm_atomic_helper_connector_dpms,
>  	.detect = intel_dp_detect,
>  	.force = intel_dp_force,
>  	.fill_modes = drm_helper_probe_single_connector_modes,
> diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
> index 35f2eb59818a..4bc371d19b91 100644
> --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> @@ -328,7 +328,7 @@ intel_dp_mst_connector_destroy(struct drm_connector *connector)
>  }
>  
>  static const struct drm_connector_funcs intel_dp_mst_connector_funcs = {
> -	.dpms = intel_connector_dpms,
> +	.dpms = drm_atomic_helper_connector_dpms,
>  	.detect = intel_dp_mst_detect,
>  	.fill_modes = drm_helper_probe_single_connector_modes,
>  	.set_property = intel_dp_mst_set_property,
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 0da4236dc85a..62073d2f83fa 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -992,12 +992,9 @@ void intel_mark_busy(struct drm_device *dev);
>  void intel_mark_idle(struct drm_device *dev);
>  void intel_crtc_restore_mode(struct drm_crtc *crtc);
>  int intel_display_suspend(struct drm_device *dev);
> -int intel_crtc_control(struct drm_crtc *crtc, bool enable);
> -void intel_crtc_update_dpms(struct drm_crtc *crtc);
>  void intel_encoder_destroy(struct drm_encoder *encoder);
>  int intel_connector_init(struct intel_connector *);
>  struct intel_connector *intel_connector_alloc(void);
> -int intel_connector_dpms(struct drm_connector *, int mode);
>  bool intel_connector_get_hw_state(struct intel_connector *connector);
>  bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
>  				struct intel_digital_port *port);
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index 18dd7d7360a0..4a601cf90f16 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -982,7 +982,7 @@ static const struct drm_connector_helper_funcs 
> intel_dsi_connector_helper_funcs
>  };
>  
>  static const struct drm_connector_funcs intel_dsi_connector_funcs = {
> -	.dpms = intel_connector_dpms,
> +	.dpms = drm_atomic_helper_connector_dpms,
>  	.detect = intel_dsi_detect,
>  	.destroy = intel_dsi_connector_destroy,
>  	.fill_modes = drm_helper_probe_single_connector_modes,
> diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
> index 600f7fb855d8..dc532bb61d22 100644
> --- a/drivers/gpu/drm/i915/intel_dvo.c
> +++ b/drivers/gpu/drm/i915/intel_dvo.c
> @@ -196,50 +196,6 @@ static void intel_enable_dvo(struct intel_encoder *encoder)
>  	intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
>  }
>  
> -/* Special dpms function to support cloning between dvo/sdvo/crt. */
> -static int intel_dvo_dpms(struct drm_connector *connector, int mode)
> -{
> -	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
> -	struct drm_crtc *crtc;
> -	struct intel_crtc_state *config;
> -
> -	/* dvo supports only 2 dpms states. */
> -	if (mode != DRM_MODE_DPMS_ON)
> -		mode = DRM_MODE_DPMS_OFF;
> -
> -	if (mode == connector->dpms)
> -		return 0;
> -
> -	connector->dpms = mode;
> -
> -	/* Only need to change hw state when actually enabled */
> -	crtc = intel_dvo->base.base.crtc;
> -	if (!crtc) {
> -		intel_dvo->base.connectors_active = false;
> -		return 0;
> -	}
> -
> -	/* We call connector dpms manually below in case pipe dpms doesn't
> -	 * change due to cloning. */
> -	if (mode == DRM_MODE_DPMS_ON) {
> -		config = to_intel_crtc(crtc)->config;
> -
> -		intel_dvo->base.connectors_active = true;
> -
> -		intel_crtc_update_dpms(crtc);
> -
> -		intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
> -	} else {
> -		intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
> -
> -		intel_dvo->base.connectors_active = false;
> -
> -		intel_crtc_update_dpms(crtc);
> -	}
> -
> -	return 0;
> -}
> -
>  static enum drm_mode_status
>  intel_dvo_mode_valid(struct drm_connector *connector,
>  		     struct drm_display_mode *mode)
> @@ -387,7 +343,7 @@ static void intel_dvo_destroy(struct drm_connector *connector)
>  }
>  
>  static const struct drm_connector_funcs intel_dvo_connector_funcs = {
> -	.dpms = intel_dvo_dpms,
> +	.dpms = drm_atomic_helper_connector_dpms,
>  	.detect = intel_dvo_detect,
>  	.destroy = intel_dvo_destroy,
>  	.fill_modes = drm_helper_probe_single_connector_modes,
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index 70bad5bf1d48..51cbea8247fe 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -1909,7 +1909,7 @@ static void intel_hdmi_destroy(struct drm_connector *connector)
>  }
>  
>  static const struct drm_connector_funcs intel_hdmi_connector_funcs = {
> -	.dpms = intel_connector_dpms,
> +	.dpms = drm_atomic_helper_connector_dpms,
>  	.detect = intel_hdmi_detect,
>  	.force = intel_hdmi_force,
>  	.fill_modes = drm_helper_probe_single_connector_modes,
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index cb634f48e7d9..881b5d13592e 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -549,7 +549,7 @@ static const struct drm_connector_helper_funcs 
> intel_lvds_connector_helper_funcs
>  };
>  
>  static const struct drm_connector_funcs intel_lvds_connector_funcs = {
> -	.dpms = intel_connector_dpms,
> +	.dpms = drm_atomic_helper_connector_dpms,
>  	.detect = intel_lvds_detect,
>  	.fill_modes = drm_helper_probe_single_connector_modes,
>  	.set_property = intel_lvds_set_property,
> diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
> index 8911e0e417ee..c98098e884cc 100644
> --- a/drivers/gpu/drm/i915/intel_sdvo.c
> +++ b/drivers/gpu/drm/i915/intel_sdvo.c
> @@ -1508,51 +1508,6 @@ static void intel_enable_sdvo(struct intel_encoder *encoder)
>  	intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
>  }
>  
> -/* Special dpms function to support cloning between dvo/sdvo/crt. */
> -static int intel_sdvo_dpms(struct drm_connector *connector, int mode)
> -{
> -	struct drm_crtc *crtc;
> -	struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
> -
> -	/* dvo supports only 2 dpms states. */
> -	if (mode != DRM_MODE_DPMS_ON)
> -		mode = DRM_MODE_DPMS_OFF;
> -
> -	if (mode == connector->dpms)
> -		return 0;
> -
> -	connector->dpms = mode;
> -
> -	/* Only need to change hw state when actually enabled */
> -	crtc = intel_sdvo->base.base.crtc;
> -	if (!crtc) {
> -		intel_sdvo->base.connectors_active = false;
> -		return 0;
> -	}
> -
> -	/* We set active outputs manually below in case pipe dpms doesn't change
> -	 * due to cloning. */
> -	if (mode != DRM_MODE_DPMS_ON) {
> -		intel_sdvo_set_active_outputs(intel_sdvo, 0);
> -		if (0)
> -			intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
> -
> -		intel_sdvo->base.connectors_active = false;
> -
> -		intel_crtc_update_dpms(crtc);
> -	} else {
> -		intel_sdvo->base.connectors_active = true;
> -
> -		intel_crtc_update_dpms(crtc);
> -
> -		if (0)
> -			intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
> -		intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
> -	}
> -
> -	return 0;
> -}
> -
>  static enum drm_mode_status
>  intel_sdvo_mode_valid(struct drm_connector *connector,
>  		      struct drm_display_mode *mode)
> @@ -2190,7 +2145,7 @@ done:
>  }
>  
>  static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
> -	.dpms = intel_sdvo_dpms,
> +	.dpms = drm_atomic_helper_connector_dpms,
>  	.detect = intel_sdvo_detect,
>  	.fill_modes = drm_helper_probe_single_connector_modes,
>  	.set_property = intel_sdvo_set_property,
> diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
> index 8b9d325bda3c..0568ae6ec9dd 100644
> --- a/drivers/gpu/drm/i915/intel_tv.c
> +++ b/drivers/gpu/drm/i915/intel_tv.c
> @@ -1509,7 +1509,7 @@ out:
>  }
>  
>  static const struct drm_connector_funcs intel_tv_connector_funcs = {
> -	.dpms = intel_connector_dpms,
> +	.dpms = drm_atomic_helper_connector_dpms,
>  	.detect = intel_tv_detect,
>  	.destroy = intel_tv_destroy,
>  	.set_property = intel_tv_set_property,


More information about the Intel-gfx mailing list