[Intel-gfx] [PATCH] drm/i915/bxt: BUNs related to port PLL
Kannan, Vandana
vandana.kannan at intel.com
Tue Jun 30 21:50:09 PDT 2015
On 7/1/2015 9:51 AM, Jindal, Sonika wrote:
>
>
> On 7/1/2015 10:06 AM, Vandana Kannan wrote:
>> This patch contains changes based on 2 updates to the spec:
>> Port PLL VCO restriction raised up to 6700.
>> Port PLL now needs DCO amp override enable for all VCO frequencies.
>>
>> Signed-off-by: Vandana Kannan <vandana.kannan at intel.com>
>> ---
>> drivers/gpu/drm/i915/intel_ddi.c | 7 +++----
>> drivers/gpu/drm/i915/intel_display.c | 2 +-
>> 2 files changed, 4 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
>> b/drivers/gpu/drm/i915/intel_ddi.c
>> index 42c1487..677096d 100644
>> --- a/drivers/gpu/drm/i915/intel_ddi.c
>> +++ b/drivers/gpu/drm/i915/intel_ddi.c
>> @@ -1495,8 +1495,8 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
>> }
>>
>> dco_amp = 15;
>> - dcoampovr_en_h = 0;
>> - if (vco >= 6200000 && vco <= 6480000) {
>> + dcoampovr_en_h = 1;
> You dont need this variable now..
>
Agreed, will make the change.
- Vandana
>> + if (vco >= 6200000 && vco <= 6700000) {
>> prop_coef = 4;
>> int_coef = 9;
>> gain_ctl = 3;
>> @@ -1550,8 +1550,7 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
>>
>> crtc_state->dpll_hw_state.pll8 = targ_cnt;
>>
>> - if (dcoampovr_en_h)
>> - crtc_state->dpll_hw_state.pll10 = PORT_PLL_DCO_AMP_OVR_EN_H;
>> + crtc_state->dpll_hw_state.pll10 = PORT_PLL_DCO_AMP_OVR_EN_H;
>>
>> crtc_state->dpll_hw_state.pll10 |= PORT_PLL_DCO_AMP(dco_amp);
>>
>> diff --git a/drivers/gpu/drm/i915/intel_display.c
>> b/drivers/gpu/drm/i915/intel_display.c
>> index eb665d7..e04be45 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -409,7 +409,7 @@ static const intel_limit_t intel_limits_chv = {
>> static const intel_limit_t intel_limits_bxt = {
>> /* FIXME: find real dot limits */
>> .dot = { .min = 0, .max = INT_MAX },
>> - .vco = { .min = 4800000, .max = 6480000 },
>> + .vco = { .min = 4800000, .max = 6700000 },
>> .n = { .min = 1, .max = 1 },
>> .m1 = { .min = 2, .max = 2 },
>> /* FIXME: find real m2 limits */
>>
More information about the Intel-gfx
mailing list