[Intel-gfx] [PATCH] drm/i915/bxt: edp1.4 Intermediate Freq support

[Ville Syrjälä]

On Thu, May 07, 2015 at 04:36:48PM +0530, Sonika Jindal wrote:
> BXT supports following intermediate link rates for edp:
> 2.16GHz, 2.43GHz, 3.24GHz, 4.32GHz.
> Adding support for programming the intermediate rates.
> 
> v2: Adding clock in bxt_clk_div struct and then look for the entry with
> required rate (Ville)
> 
> Signed-off-by: Sonika Jindal <sonika.jindal at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_ddi.c |   45 +++++++++++++++++++++-----------------
>  drivers/gpu/drm/i915/intel_dp.c  |    7 +++++-
>  2 files changed, 31 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 9c1e74a..7b9d226 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1327,6 +1327,7 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,
>  
>  /* bxt clock parameters */
>  struct bxt_clk_div {
> +	int clock;
>  	uint32_t p1;
>  	uint32_t p2;
>  	uint32_t m2_int;
> @@ -1342,13 +1343,13 @@ struct bxt_clk_div {
>  
>  /* pre-calculated values for DP linkrates */
>  static struct bxt_clk_div bxt_dp_clk_val[7] = {
> -	/* 162 */ {4, 2, 32, 1677722, 1, 1, 5, 11, 2, 9, 0xd},
> -	/* 270 */ {4, 1, 27,       0, 0, 1, 3,  8, 1, 9, 0xd},
> -	/* 540 */ {2, 1, 27,       0, 0, 1, 3,  8, 1, 9, 0x18},
> -	/* 216 */ {3, 2, 32, 1677722, 1, 1, 5, 11, 2, 9, 0xd},
> -	/* 243 */ {4, 1, 24, 1258291, 1, 1, 5, 11, 2, 9, 0xd},
> -	/* 324 */ {4, 1, 32, 1677722, 1, 1, 5, 11, 2, 9, 0xd},
> -	/* 432 */ {3, 1, 32, 1677722, 1, 1, 5, 11, 2, 9, 0x18}
> +	{162000, 4, 2, 32, 1677722, 1, 1, 5, 11, 2, 9, 0xd},
> +	{270000, 4, 1, 27,       0, 0, 1, 3,  8, 1, 9, 0xd},
> +	{540000, 2, 1, 27,       0, 0, 1, 3,  8, 1, 9, 0x18},
> +	{216000, 3, 2, 32, 1677722, 1, 1, 5, 11, 2, 9, 0xd},
> +	{243000, 4, 1, 24, 1258291, 1, 1, 5, 11, 2, 9, 0xd},
> +	{324000, 4, 1, 32, 1677722, 1, 1, 5, 11, 2, 9, 0xd},
> +	{432000, 3, 1, 32, 1677722, 1, 1, 5, 11, 2, 9, 0x18}
>  };
>  
>  static bool
> @@ -1401,20 +1402,24 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
>  			intel_encoder->type == INTEL_OUTPUT_EDP) {
>  		struct drm_encoder *encoder = &intel_encoder->base;
>  		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> +		int link_rate;
> +		int i;
>  
> -		switch (intel_dp->link_bw) {
> -		case DP_LINK_BW_1_62:
> -			clk_div = bxt_dp_clk_val[0];
> -			break;
> -		case DP_LINK_BW_2_7:
> -			clk_div = bxt_dp_clk_val[1];
> -			break;
> -		case DP_LINK_BW_5_4:
> -			clk_div = bxt_dp_clk_val[2];
> -			break;
> -		default:
> -			clk_div = bxt_dp_clk_val[0];
> -			DRM_ERROR("Unknown link rate\n");
> +		/*
> +		 * If edp1.4 intermediate frequency support is present, we set
> +		 * link_bw to 0 and a valid rate index in rate_select.
> +		 */
> +		if (intel_dp->link_bw)
> +			link_rate = clock;
> +		else
> +			link_rate = intel_dp->sink_rates[intel_dp->rate_select];

'clock' should be correct in either case.

> +
> +		clk_div = bxt_dp_clk_val[0];
> +		for (i = 0; i < 7; ++i) {
> +			if (bxt_dp_clk_val[i].clock == link_rate) {
> +				clk_div = bxt_dp_clk_val[i];
> +				break;
> +			}
>  		}
>  	}
>  
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index c9d50d1..e6ee7c6 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -85,6 +85,8 @@ static const struct dp_link_dpll chv_dpll[] = {
>  		{ .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
>  };
>  
> +static const int bxt_rates[] = { 162000, 216000, 243000, 270000,
> +				  324000, 432000, 540000 };
>  static const int skl_rates[] = { 162000, 216000, 270000,
>  				  324000, 432000, 540000 };
>  static const int chv_rates[] = { 162000, 202500, 210000, 216000,
> @@ -1161,7 +1163,10 @@ intel_dp_sink_rates(struct intel_dp *intel_dp, const int **sink_rates)
>  static int
>  intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
>  {
> -	if (IS_SKYLAKE(dev)) {
> +	if (IS_BROXTON(dev)) {
> +		*source_rates = bxt_rates;
> +		return ARRAY_SIZE(bxt_rates);
> +	} else if (IS_SKYLAKE(dev)) {
>  		*source_rates = skl_rates;
>  		return ARRAY_SIZE(skl_rates);
>  	} else if (IS_CHERRYVIEW(dev)) {
> -- 
> 1.7.10.4

-- 
Ville Syrjälä
Intel OTC