[Intel-gfx] [PATCH v4] drm/i915/chv: Set min freq to efficient frequency on chv

Ville Syrjälä ville.syrjala at linux.intel.com
Mon May 11 04:06:10 PDT 2015


On Sat, May 09, 2015 at 11:04:28AM +0530, Deepak S wrote:
> 
> 
> On Friday 08 May 2015 10:09 PM, Ville Syrjälä wrote:
> > On Fri, May 08, 2015 at 08:43:12PM +0530, deepak.s at linux.intel.com wrote:
> >> From: Deepak S <deepak.s at linux.intel.com>
> >>
> >> After feedback from the hardware team, now we set the GPU min/idel freq to RPe.
> >> Punit is expecting us to operate GPU between Rpe & Rp0. If we drop the
> >> frequency to RPn, punit is failing to change the input voltage to
> >> minimum :(
> > As I mentioned I've been unable to reproduce that particular problem
> > on my BSW. Perhaps add a note about that in the commit message.
> >
> Issue is Vgg_in voltage not getting dropped :(. Vnn observation is same as what your seeing.

I think I was observing Vgg, not Vnn.

> We saw this issue on CHV platform and confirmed by punit team.
> Let me update the commit msg.
> 
> >> Since Punit validates the rps range [RPe, RP0]. This patch
> >> removes unused cherryview_rps_min_freq function.
> > But I can accept that we should stick to the validated range, so I
> > can slap an r-b on the patch anyway:
> > Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >
> >> v2: Change commit message
> >>
> >> v3: set min_freq before idle_freq (chris)
> >>
> >> v4: Squash 'Remove unused rps min function' patch
> >>
> >> Signed-off-by: Deepak S <deepak.s at linux.intel.com>
> >> Acked-by: Chris Wilson <chris at chris-wilson.co.uk>
> >> ---
> >>   drivers/gpu/drm/i915/intel_pm.c | 21 ++-------------------
> >>   1 file changed, 2 insertions(+), 19 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> >> index 852f756..b6b14a4 100644
> >> --- a/drivers/gpu/drm/i915/intel_pm.c
> >> +++ b/drivers/gpu/drm/i915/intel_pm.c
> >> @@ -4689,24 +4689,6 @@ static int cherryview_rps_guar_freq(struct drm_i915_private *dev_priv)
> >>   	return rp1;
> >>   }
> >>   
> >> -static int cherryview_rps_min_freq(struct drm_i915_private *dev_priv)
> >> -{
> >> -	struct drm_device *dev = dev_priv->dev;
> >> -	u32 val, rpn;
> >> -
> >> -	if (dev->pdev->revision >= 0x20) {
> >> -		val = vlv_punit_read(dev_priv, FB_GFX_FMIN_AT_VMIN_FUSE);
> >> -		rpn = ((val >> FB_GFX_FMIN_AT_VMIN_FUSE_SHIFT) &
> >> -		       FB_GFX_FREQ_FUSE_MASK);
> >> -	} else { /* For pre-production hardware */
> >> -		val = vlv_punit_read(dev_priv, PUNIT_GPU_STATUS_REG);
> >> -		rpn = ((val >> PUNIT_GPU_STATIS_GFX_MIN_FREQ_SHIFT) &
> >> -		       PUNIT_GPU_STATUS_GFX_MIN_FREQ_MASK);
> >> -	}
> >> -
> >> -	return rpn;
> >> -}
> >> -
> >>   static int valleyview_rps_guar_freq(struct drm_i915_private *dev_priv)
> >>   {
> >>   	u32 val, rp1;
> >> @@ -4958,7 +4940,8 @@ static void cherryview_init_gt_powersave(struct drm_device *dev)
> >>   			 intel_gpu_freq(dev_priv, dev_priv->rps.rp1_freq),
> >>   			 dev_priv->rps.rp1_freq);
> >>   
> >> -	dev_priv->rps.min_freq = cherryview_rps_min_freq(dev_priv);
> >> +	/* PUnit validated range is only [RPe, RP0] */
> >> +	dev_priv->rps.min_freq = dev_priv->rps.efficient_freq;
> >>   	DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n",
> >>   			 intel_gpu_freq(dev_priv, dev_priv->rps.min_freq),
> >>   			 dev_priv->rps.min_freq);
> >> -- 
> >> 1.9.1

-- 
Ville Syrjälä
Intel OTC


More information about the Intel-gfx mailing list