[Intel-gfx] [V2 PATCH 2/2] drm/i915: start adding dp mst audio
Ander Conselvan De Oliveira
conselvan2 at gmail.com
Mon Nov 23 07:01:07 PST 2015
On Mon, 2015-11-23 at 14:04 +0000, Zanoni, Paulo R wrote:
> Em Qui, 2015-11-19 às 13:07 +0200, Ander Conselvan De Oliveira
> escreveu:
> > (Cc'ing Paulo for the audio power domain question)
> >
> > On Wed, 2015-11-11 at 13:33 +0800, libin.yang at linux.intel.com wrote:
> > > From: Libin Yang <libin.yang at linux.intel.com>
> > >
> > > This patch adds support for DP MST audio in i915.
> > >
> > > Enable audio codec when DP MST is enabled if has_audio flag is set.
> > > Disable audio codec when DP MST is disabled if has_audio flag is
> > > set.
> > >
> > > Signed-off-by: Libin Yang <libin.yang at linux.intel.com>
> > > Signed-off-by: Dave Airlie <airlied at redhat.com>
> > > ---
> > > drivers/gpu/drm/i915/i915_debugfs.c | 14 ++++++++++++++
> > > drivers/gpu/drm/i915/intel_audio.c | 9 ++++++---
> > > drivers/gpu/drm/i915/intel_dp_mst.c | 25 +++++++++++++++++++++++++
> > > 3 files changed, 45 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
> > > b/drivers/gpu/drm/i915/i915_debugfs.c
> > > index 5659d4c..38c7a5d 100644
> > > --- a/drivers/gpu/drm/i915/i915_debugfs.c
> > > +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> > > @@ -2873,6 +2873,18 @@ static void intel_dp_info(struct seq_file
> > > *m,
> > > intel_panel_info(m, &intel_connector->panel);
> > > }
> > >
> > > +static void intel_dp_mst_info(struct seq_file *m,
> > > + struct intel_connector *intel_connector)
> > > +{
> > > + struct intel_encoder *intel_encoder = intel_connector-
> > > > encoder;
> > > + struct intel_dp_mst_encoder *intel_mst =
> > > + enc_to_mst(&intel_encoder->base);
> > > + struct intel_digital_port *intel_dig_port = intel_mst-
> > > > primary;
> > > + struct intel_dp *intel_dp = &intel_dig_port->dp;
> > > +
> > > + seq_printf(m, "\taudio support: %s\n",
> > > drm_dp_mst_port_has_audio(&intel_dp->mst_mgr, intel_connector-
> > > > port) ? "yes" :
> > > "no");
> >
> > Too much going on in just one line. You can replace the ternary
> > operator with
> > yesno(). You could also add a has_audio bool:
> >
> > bool has_audio = drm_dp_mst_port_has_audio(...);
> > seq_printf(..., yesno(has_audio));
> >
> >
> > > +}
> > > +
> > > static void intel_hdmi_info(struct seq_file *m,
> > > struct intel_connector
> > > *intel_connector)
> > > {
> > > @@ -2916,6 +2928,8 @@ static void intel_connector_info(struct
> > > seq_file *m,
> > > intel_hdmi_info(m, intel_connector);
> > > else if (intel_encoder->type == INTEL_OUTPUT_LVDS)
> > > intel_lvds_info(m, intel_connector);
> > > + else if (intel_encoder->type ==
> > > INTEL_OUTPUT_DP_MST)
> > > + intel_dp_mst_info(m, intel_connector);
> > > }
> > >
> > > seq_printf(m, "\tmodes:\n");
> > > diff --git a/drivers/gpu/drm/i915/intel_audio.c
> > > b/drivers/gpu/drm/i915/intel_audio.c
> > > index 63d4706..07b2aa6 100644
> > > --- a/drivers/gpu/drm/i915/intel_audio.c
> > > +++ b/drivers/gpu/drm/i915/intel_audio.c
> > > @@ -262,7 +262,8 @@ static void hsw_audio_codec_disable(struct
> > > intel_encoder
> > > *encoder)
> > > tmp |= AUD_CONFIG_N_PROG_ENABLE;
> > > tmp &= ~AUD_CONFIG_UPPER_N_MASK;
> > > tmp &= ~AUD_CONFIG_LOWER_N_MASK;
> > > - if (intel_pipe_has_type(intel_crtc,
> > > INTEL_OUTPUT_DISPLAYPORT))
> > > + if (intel_pipe_has_type(intel_crtc,
> > > INTEL_OUTPUT_DISPLAYPORT) ||
> > > + intel_pipe_has_type(intel_crtc,
> > > INTEL_OUTPUT_DP_MST))
> >
> > The second line should be aligned with '('.
> >
> > > tmp |= AUD_CONFIG_N_VALUE_INDEX;
> > > I915_WRITE(HSW_AUD_CFG(pipe), tmp);
> > >
> > > @@ -478,7 +479,8 @@ static void ilk_audio_codec_enable(struct
> > > drm_connector
> > > *connector,
> > > tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
> > > tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
> > > tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK;
> > > - if (intel_pipe_has_type(intel_crtc,
> > > INTEL_OUTPUT_DISPLAYPORT))
> > > + if (intel_pipe_has_type(intel_crtc,
> > > INTEL_OUTPUT_DISPLAYPORT) ||
> > > + intel_pipe_has_type(intel_crtc,
> > > INTEL_OUTPUT_DP_MST))
> >
> > Same here.
> >
> > > tmp |= AUD_CONFIG_N_VALUE_INDEX;
> > > else
> > > tmp |=
> > > audio_config_hdmi_pixel_clock(adjusted_mode);
> > > @@ -516,7 +518,8 @@ void intel_audio_codec_enable(struct
> > > intel_encoder
> > > *intel_encoder)
> > >
> > > /* ELD Conn_Type */
> > > connector->eld[5] &= ~(3 << 2);
> > > - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
> > > + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
> > > + intel_pipe_has_type(crtc, INTEL_OUTPUT_DP_MST))
> > > connector->eld[5] |= (1 << 2);
> >
> > And here.
> >
> > >
> > > connector->eld[6] = drm_av_sync_delay(connector,
> > > adjusted_mode) / 2;
> > > diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c
> > > b/drivers/gpu/drm/i915/intel_dp_mst.c
> > > index 0639275..4ded0fb 100644
> > > --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> > > +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> > > @@ -78,6 +78,8 @@ static bool intel_dp_mst_compute_config(struct
> > > intel_encoder
> > > *encoder,
> > > return false;
> > > }
> > >
> > > + if (drm_dp_mst_port_has_audio(&intel_dp->mst_mgr, found-
> > > > port))
> > > + pipe_config->has_audio = true;
> > > mst_pbn = drm_dp_calc_pbn_mode(adjusted_mode->crtc_clock,
> > > bpp);
> > >
> > > pipe_config->pbn = mst_pbn;
> > > @@ -102,6 +104,11 @@ static void intel_mst_disable_dp(struct
> > > intel_encoder
> > > *encoder)
> > > struct intel_dp_mst_encoder *intel_mst =
> > > enc_to_mst(&encoder->base);
> > > struct intel_digital_port *intel_dig_port = intel_mst-
> > > > primary;
> > > struct intel_dp *intel_dp = &intel_dig_port->dp;
> > > + struct drm_device *dev = encoder->base.dev;
> > > + struct drm_i915_private *dev_priv = dev->dev_private;
> > > + struct drm_crtc *crtc = encoder->base.crtc;
> > > + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > > +
> > > int ret;
> > >
> > > DRM_DEBUG_KMS("%d\n", intel_dp->active_mst_links);
> > > @@ -112,6 +119,10 @@ static void intel_mst_disable_dp(struct
> > > intel_encoder
> > > *encoder)
> > > if (ret) {
> > > DRM_ERROR("failed to update payload %d\n", ret);
> > > }
> > > + if (intel_crtc->config->has_audio) {
> > > + intel_audio_codec_disable(encoder);
> > > + intel_display_power_put(dev_priv,
> > > POWER_DOMAIN_AUDIO);
> > > + }
> >
> > It seems the power domain is only need for DDI platforms. Perhaps it
> > would make
> > sense to move that into hsw_audio_codec_{en,dis}able. Paulo?
>
> The power domains code usually tries to be platform-independent,
> abstracting away the different power wells, which are the platform-
> dependent thing. So I'm fine with every platform getting the audio
> power domain when it needs to use audio, even if the platform doesn't
> have power wells. So if some other platform in the future introduces
> some new odd power well for audio, we can rely on the fact that we
> already have the proper power domain get/put calls, and focus on just
> implementing the correct translation from "audio power domain" to
> proper power wells.
Hmm, ok. So I think the way to go is to move the power domain handling into
intel_audio_codec_enable/disable. But that would be a separate patch, so Libin,
I think you can leave this as is.
Ander
>
> >
> > > }
> > >
> > > static void intel_mst_post_disable_dp(struct intel_encoder
> > > *encoder)
> > > @@ -214,6 +225,7 @@ static void intel_mst_enable_dp(struct
> > > intel_encoder
> > > *encoder)
> > > struct intel_dp *intel_dp = &intel_dig_port->dp;
> > > struct drm_device *dev = intel_dig_port->base.base.dev;
> > > struct drm_i915_private *dev_priv = dev->dev_private;
> > > + struct intel_crtc *crtc = to_intel_crtc(encoder-
> > > > base.crtc);
> > > enum port port = intel_dig_port->port;
> > > int ret;
> > >
> > > @@ -226,6 +238,13 @@ static void intel_mst_enable_dp(struct
> > > intel_encoder
> > > *encoder)
> > > ret = drm_dp_check_act_status(&intel_dp->mst_mgr);
> > >
> > > ret = drm_dp_update_payload_part2(&intel_dp->mst_mgr);
> > > +
> > > + if (crtc->config->has_audio) {
> > > + DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
> > > + pipe_name(crtc->pipe));
> > > + intel_display_power_get(dev_priv,
> > > POWER_DOMAIN_AUDIO);
> > > + intel_audio_codec_enable(encoder);
> > > + }
> > > }
> > >
> > > static bool intel_dp_mst_enc_get_hw_state(struct intel_encoder
> > > *encoder,
> > > @@ -251,6 +270,12 @@ static void intel_dp_mst_enc_get_config(struct
> > > intel_encoder *encoder,
> > >
> > > pipe_config->has_dp_encoder = true;
> > >
> > > + if (intel_display_power_is_enabled(dev_priv,
> > > POWER_DOMAIN_AUDIO)) {
> > > + temp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
> > > + if (temp & AUDIO_OUTPUT_ENABLE(crtc->pipe))
> > > + pipe_config->has_audio = true;
> > > + }
> > > +
> >
> > This code is DDI specific. That shouldn't be a problem since we only
> > support DP
> > MST on DDI platforms, but we shouldn't duplicate that logic here. So
> > I think
> > this should be added to a function that can be called both from here
> > and
> > intel_ddi.c.
>
>
More information about the Intel-gfx
mailing list