[Intel-gfx] [V2 PATCH 2/2] drm/i915: start adding dp mst audio
Libin Yang
libin.yang at linux.intel.com
Mon Nov 23 23:10:19 PST 2015
Best Regards,
Libin
On 11/23/2015 11:01 PM, Ander Conselvan De Oliveira wrote:
> On Mon, 2015-11-23 at 14:04 +0000, Zanoni, Paulo R wrote:
>> Em Qui, 2015-11-19 às 13:07 +0200, Ander Conselvan De Oliveira
>> escreveu:
>>> (Cc'ing Paulo for the audio power domain question)
>>>
>>> On Wed, 2015-11-11 at 13:33 +0800, libin.yang at linux.intel.com wrote:
>>>> From: Libin Yang <libin.yang at linux.intel.com>
>>>>
>>>> This patch adds support for DP MST audio in i915.
>>>>
>>>> Enable audio codec when DP MST is enabled if has_audio flag is set.
>>>> Disable audio codec when DP MST is disabled if has_audio flag is
>>>> set.
>>>>
>>>> Signed-off-by: Libin Yang <libin.yang at linux.intel.com>
>>>> Signed-off-by: Dave Airlie <airlied at redhat.com>
>>>> ---
>>>> drivers/gpu/drm/i915/i915_debugfs.c | 14 ++++++++++++++
>>>> drivers/gpu/drm/i915/intel_audio.c | 9 ++++++---
>>>> drivers/gpu/drm/i915/intel_dp_mst.c | 25 +++++++++++++++++++++++++
>>>> 3 files changed, 45 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
>>>> b/drivers/gpu/drm/i915/i915_debugfs.c
>>>> index 5659d4c..38c7a5d 100644
>>>> --- a/drivers/gpu/drm/i915/i915_debugfs.c
>>>> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
>>>> @@ -2873,6 +2873,18 @@ static void intel_dp_info(struct seq_file
>>>> *m,
>>>> intel_panel_info(m, &intel_connector->panel);
>>>> }
>>>>
>>>> +static void intel_dp_mst_info(struct seq_file *m,
>>>> + struct intel_connector *intel_connector)
>>>> +{
>>>> + struct intel_encoder *intel_encoder = intel_connector-
>>>>> encoder;
>>>> + struct intel_dp_mst_encoder *intel_mst =
>>>> + enc_to_mst(&intel_encoder->base);
>>>> + struct intel_digital_port *intel_dig_port = intel_mst-
>>>>> primary;
>>>> + struct intel_dp *intel_dp = &intel_dig_port->dp;
>>>> +
>>>> + seq_printf(m, "\taudio support: %s\n",
>>>> drm_dp_mst_port_has_audio(&intel_dp->mst_mgr, intel_connector-
>>>>> port) ? "yes" :
>>>> "no");
>>>
>>> Too much going on in just one line. You can replace the ternary
>>> operator with
>>> yesno(). You could also add a has_audio bool:
>>>
>>> bool has_audio = drm_dp_mst_port_has_audio(...);
>>> seq_printf(..., yesno(has_audio));
>>>
>>>
>>>> +}
>>>> +
>>>> static void intel_hdmi_info(struct seq_file *m,
>>>> struct intel_connector
>>>> *intel_connector)
>>>> {
>>>> @@ -2916,6 +2928,8 @@ static void intel_connector_info(struct
>>>> seq_file *m,
>>>> intel_hdmi_info(m, intel_connector);
>>>> else if (intel_encoder->type == INTEL_OUTPUT_LVDS)
>>>> intel_lvds_info(m, intel_connector);
>>>> + else if (intel_encoder->type ==
>>>> INTEL_OUTPUT_DP_MST)
>>>> + intel_dp_mst_info(m, intel_connector);
>>>> }
>>>>
>>>> seq_printf(m, "\tmodes:\n");
>>>> diff --git a/drivers/gpu/drm/i915/intel_audio.c
>>>> b/drivers/gpu/drm/i915/intel_audio.c
>>>> index 63d4706..07b2aa6 100644
>>>> --- a/drivers/gpu/drm/i915/intel_audio.c
>>>> +++ b/drivers/gpu/drm/i915/intel_audio.c
>>>> @@ -262,7 +262,8 @@ static void hsw_audio_codec_disable(struct
>>>> intel_encoder
>>>> *encoder)
>>>> tmp |= AUD_CONFIG_N_PROG_ENABLE;
>>>> tmp &= ~AUD_CONFIG_UPPER_N_MASK;
>>>> tmp &= ~AUD_CONFIG_LOWER_N_MASK;
>>>> - if (intel_pipe_has_type(intel_crtc,
>>>> INTEL_OUTPUT_DISPLAYPORT))
>>>> + if (intel_pipe_has_type(intel_crtc,
>>>> INTEL_OUTPUT_DISPLAYPORT) ||
>>>> + intel_pipe_has_type(intel_crtc,
>>>> INTEL_OUTPUT_DP_MST))
>>>
>>> The second line should be aligned with '('.
>>>
>>>> tmp |= AUD_CONFIG_N_VALUE_INDEX;
>>>> I915_WRITE(HSW_AUD_CFG(pipe), tmp);
>>>>
>>>> @@ -478,7 +479,8 @@ static void ilk_audio_codec_enable(struct
>>>> drm_connector
>>>> *connector,
>>>> tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
>>>> tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
>>>> tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK;
>>>> - if (intel_pipe_has_type(intel_crtc,
>>>> INTEL_OUTPUT_DISPLAYPORT))
>>>> + if (intel_pipe_has_type(intel_crtc,
>>>> INTEL_OUTPUT_DISPLAYPORT) ||
>>>> + intel_pipe_has_type(intel_crtc,
>>>> INTEL_OUTPUT_DP_MST))
>>>
>>> Same here.
>>>
>>>> tmp |= AUD_CONFIG_N_VALUE_INDEX;
>>>> else
>>>> tmp |=
>>>> audio_config_hdmi_pixel_clock(adjusted_mode);
>>>> @@ -516,7 +518,8 @@ void intel_audio_codec_enable(struct
>>>> intel_encoder
>>>> *intel_encoder)
>>>>
>>>> /* ELD Conn_Type */
>>>> connector->eld[5] &= ~(3 << 2);
>>>> - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
>>>> + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
>>>> + intel_pipe_has_type(crtc, INTEL_OUTPUT_DP_MST))
>>>> connector->eld[5] |= (1 << 2);
>>>
>>> And here.
>>>
>>>>
>>>> connector->eld[6] = drm_av_sync_delay(connector,
>>>> adjusted_mode) / 2;
>>>> diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c
>>>> b/drivers/gpu/drm/i915/intel_dp_mst.c
>>>> index 0639275..4ded0fb 100644
>>>> --- a/drivers/gpu/drm/i915/intel_dp_mst.c
>>>> +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
>>>> @@ -78,6 +78,8 @@ static bool intel_dp_mst_compute_config(struct
>>>> intel_encoder
>>>> *encoder,
>>>> return false;
>>>> }
>>>>
>>>> + if (drm_dp_mst_port_has_audio(&intel_dp->mst_mgr, found-
>>>>> port))
>>>> + pipe_config->has_audio = true;
>>>> mst_pbn = drm_dp_calc_pbn_mode(adjusted_mode->crtc_clock,
>>>> bpp);
>>>>
>>>> pipe_config->pbn = mst_pbn;
>>>> @@ -102,6 +104,11 @@ static void intel_mst_disable_dp(struct
>>>> intel_encoder
>>>> *encoder)
>>>> struct intel_dp_mst_encoder *intel_mst =
>>>> enc_to_mst(&encoder->base);
>>>> struct intel_digital_port *intel_dig_port = intel_mst-
>>>>> primary;
>>>> struct intel_dp *intel_dp = &intel_dig_port->dp;
>>>> + struct drm_device *dev = encoder->base.dev;
>>>> + struct drm_i915_private *dev_priv = dev->dev_private;
>>>> + struct drm_crtc *crtc = encoder->base.crtc;
>>>> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>>>> +
>>>> int ret;
>>>>
>>>> DRM_DEBUG_KMS("%d\n", intel_dp->active_mst_links);
>>>> @@ -112,6 +119,10 @@ static void intel_mst_disable_dp(struct
>>>> intel_encoder
>>>> *encoder)
>>>> if (ret) {
>>>> DRM_ERROR("failed to update payload %d\n", ret);
>>>> }
>>>> + if (intel_crtc->config->has_audio) {
>>>> + intel_audio_codec_disable(encoder);
>>>> + intel_display_power_put(dev_priv,
>>>> POWER_DOMAIN_AUDIO);
>>>> + }
>>>
>>> It seems the power domain is only need for DDI platforms. Perhaps it
>>> would make
>>> sense to move that into hsw_audio_codec_{en,dis}able. Paulo?
>>
>> The power domains code usually tries to be platform-independent,
>> abstracting away the different power wells, which are the platform-
>> dependent thing. So I'm fine with every platform getting the audio
>> power domain when it needs to use audio, even if the platform doesn't
>> have power wells. So if some other platform in the future introduces
>> some new odd power well for audio, we can rely on the fact that we
>> already have the proper power domain get/put calls, and focus on just
>> implementing the correct translation from "audio power domain" to
>> proper power wells.
>
> Hmm, ok. So I think the way to go is to move the power domain handling into
> intel_audio_codec_enable/disable. But that would be a separate patch, so Libin,
> I think you can leave this as is.
get it. Thanks.
Regards,
Libin
>
> Ander
>
>>
>>>
>>>> }
>>>>
>>>> static void intel_mst_post_disable_dp(struct intel_encoder
>>>> *encoder)
>>>> @@ -214,6 +225,7 @@ static void intel_mst_enable_dp(struct
>>>> intel_encoder
>>>> *encoder)
>>>> struct intel_dp *intel_dp = &intel_dig_port->dp;
>>>> struct drm_device *dev = intel_dig_port->base.base.dev;
>>>> struct drm_i915_private *dev_priv = dev->dev_private;
>>>> + struct intel_crtc *crtc = to_intel_crtc(encoder-
>>>>> base.crtc);
>>>> enum port port = intel_dig_port->port;
>>>> int ret;
>>>>
>>>> @@ -226,6 +238,13 @@ static void intel_mst_enable_dp(struct
>>>> intel_encoder
>>>> *encoder)
>>>> ret = drm_dp_check_act_status(&intel_dp->mst_mgr);
>>>>
>>>> ret = drm_dp_update_payload_part2(&intel_dp->mst_mgr);
>>>> +
>>>> + if (crtc->config->has_audio) {
>>>> + DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
>>>> + pipe_name(crtc->pipe));
>>>> + intel_display_power_get(dev_priv,
>>>> POWER_DOMAIN_AUDIO);
>>>> + intel_audio_codec_enable(encoder);
>>>> + }
>>>> }
>>>>
>>>> static bool intel_dp_mst_enc_get_hw_state(struct intel_encoder
>>>> *encoder,
>>>> @@ -251,6 +270,12 @@ static void intel_dp_mst_enc_get_config(struct
>>>> intel_encoder *encoder,
>>>>
>>>> pipe_config->has_dp_encoder = true;
>>>>
>>>> + if (intel_display_power_is_enabled(dev_priv,
>>>> POWER_DOMAIN_AUDIO)) {
>>>> + temp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
>>>> + if (temp & AUDIO_OUTPUT_ENABLE(crtc->pipe))
>>>> + pipe_config->has_audio = true;
>>>> + }
>>>> +
>>>
>>> This code is DDI specific. That shouldn't be a problem since we only
>>> support DP
>>> MST on DDI platforms, but we shouldn't duplicate that logic here. So
>>> I think
>>> this should be added to a function that can be called both from here
>>> and
>>> intel_ddi.c.
>>
>>
More information about the Intel-gfx
mailing list