[Intel-gfx] [PATCH v2 07/10] drm/i915: Undiplicate VLV signal level code
Jim Bride
jim.bride at linux.intel.com
Tue Apr 19 20:37:26 UTC 2016
On Wed, Apr 13, 2016 at 08:47:50PM +0300, Ander Conselvan de Oliveira wrote:
> The logic for setting signal levels is used for both HDMI and DP with
> small variations. But it is similar enough to put behind a function
> called from the encoders.
>
> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 4 ++++
> drivers/gpu/drm/i915/intel_dp.c | 43 ++++++++++++-----------------------
> drivers/gpu/drm/i915/intel_dpio_phy.c | 26 +++++++++++++++++++++
> drivers/gpu/drm/i915/intel_hdmi.c | 14 ++++--------
> 4 files changed, 49 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 85c0610..f2481a2 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -3565,6 +3565,10 @@ void chv_phy_pre_encoder_enable(struct intel_encoder *encoder);
> void chv_phy_release_cl2_override(struct intel_encoder *encoder);
> void chv_phy_post_disable(struct intel_encoder *encoder);
>
> +void vlv_set_phy_signal_level(struct intel_encoder *encoder,
> + u32 demph_reg_value, u32 preemph_reg_value,
> + u32 uniqtranscale_reg_value, u32 tx3_demph);
> +
> int intel_gpu_freq(struct drm_i915_private *dev_priv, int val);
> int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index cdacd8b..3e42355 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3009,16 +3009,10 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
>
> static uint32_t vlv_signal_levels(struct intel_dp *intel_dp)
> {
> - struct drm_device *dev = intel_dp_to_dev(intel_dp);
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
> - struct intel_crtc *intel_crtc =
> - to_intel_crtc(dport->base.base.crtc);
> + struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
> unsigned long demph_reg_value, preemph_reg_value,
> uniqtranscale_reg_value;
> uint8_t train_set = intel_dp->train_set[0];
> - enum dpio_channel port = vlv_dport_to_channel(dport);
> - int pipe = intel_crtc->pipe;
>
> switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
> case DP_TRAIN_PRE_EMPH_LEVEL_0:
> @@ -3093,16 +3087,8 @@ static uint32_t vlv_signal_levels(struct intel_dp *intel_dp)
> return 0;
> }
>
> - mutex_lock(&dev_priv->sb_lock);
> - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x00000000);
> - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(port), demph_reg_value);
> - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(port),
> - uniqtranscale_reg_value);
> - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(port), 0x0C782040);
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW11(port), 0x00030000);
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), preemph_reg_value);
> - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x80000000);
> - mutex_unlock(&dev_priv->sb_lock);
> + vlv_set_phy_signal_level(encoder, demph_reg_value, preemph_reg_value,
> + uniqtranscale_reg_value, 0);
>
> return 0;
> }
> @@ -4285,17 +4271,6 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
> intel_dp->compliance_test_type = 0;
> intel_dp->compliance_test_data = 0;
>
> - /*
> - * If we were in MST mode, and device is not there,
> - * get out of MST mode
> - */
> - if (intel_dp->is_mst) {
> - DRM_DEBUG_KMS("MST device may have disappeared %d vs %d\n",
> - intel_dp->is_mst, intel_dp->mst_mgr.mst_state);
> - intel_dp->is_mst = false;
> - drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
> - intel_dp->is_mst);
> - }
> goto out;
> }
>
> @@ -4355,6 +4330,18 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
> out:
> if (status != connector_status_connected) {
> intel_dp_unset_edid(intel_dp);
> +
> + /*
> + * If we were in MST mode, and device is not there,
> + * get out of MST mode
> + */
> + if (intel_dp->is_mst) {
> + DRM_DEBUG_KMS("MST device may have disappeared %d vs %d\n",
> + intel_dp->is_mst, intel_dp->mst_mgr.mst_state);
> + intel_dp->is_mst = false;
> + drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
> + intel_dp->is_mst);
> + }
The two hunks above seem unrelated to what the patch set is trying to do and
would break DP MST again. ;)
Jim
> }
>
> intel_display_power_put(to_i915(dev), power_domain);
> diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c b/drivers/gpu/drm/i915/intel_dpio_phy.c
> index 2400554..d9e6482 100644
> --- a/drivers/gpu/drm/i915/intel_dpio_phy.c
> +++ b/drivers/gpu/drm/i915/intel_dpio_phy.c
> @@ -369,3 +369,29 @@ void chv_phy_post_disable(struct intel_encoder *encoder)
> */
> chv_phy_powergate_lanes(encoder, false, 0x0);
> }
> +
> +void vlv_set_phy_signal_level(struct intel_encoder *encoder,
> + u32 demph_reg_value, u32 preemph_reg_value,
> + u32 uniqtranscale_reg_value, u32 tx3_demph)
> +{
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> + struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
> + enum dpio_channel port = vlv_dport_to_channel(dport);
> + int pipe = intel_crtc->pipe;
> +
> + mutex_lock(&dev_priv->sb_lock);
> + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x00000000);
> + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(port), demph_reg_value);
> + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(port),
> + uniqtranscale_reg_value);
> + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(port), 0x0C782040);
> +
> + if (tx3_demph)
> + vlv_dpio_write(dev_priv, pipe, VLV_TX3_DW4(port), tx3_demph);
> +
> + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW11(port), 0x00030000);
> + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), preemph_reg_value);
> + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), DPIO_TX_OCALINIT_EN);
> + mutex_unlock(&dev_priv->sb_lock);
> +}
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index f424af5..9386772 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -1601,21 +1601,15 @@ static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
> val |= 0x001000c4;
> vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW8(port), val);
>
> - /* HDMI 1.0V-2dB */
> - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0);
> - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(port), 0x2b245f5f);
> - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(port), 0x5578b83a);
> - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(port), 0x0c782040);
> - vlv_dpio_write(dev_priv, pipe, VLV_TX3_DW4(port), 0x2b247878);
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW11(port), 0x00030000);
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), 0x00002000);
> - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), DPIO_TX_OCALINIT_EN);
> -
> /* Program lane clock */
> vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW14(port), 0x00760018);
> vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888);
> mutex_unlock(&dev_priv->sb_lock);
>
> + /* HDMI 1.0V-2dB */
> + vlv_set_phy_signal_level(encoder, 0x2b245f5f, 0x00002000, 0x5578b83a,
> + 0x2b247878);
> +
> intel_hdmi->set_infoframes(&encoder->base,
> intel_crtc->config->has_hdmi_sink,
> adjusted_mode);
> --
> 2.4.11
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list