[Intel-gfx] [PATCH 1/2] drm : adds Y-coordinate and Colorimetry Format

[vathsala nagaraju]

PSR2 vsc revision number hb2( as per table 6-11)is updated to
4 or 5 based on Y cordinate and Colorimetry Format as below
04h = 3D stereo + PSR/PSR2 + Y-coordinate.
05h = -3D stereo- + PSR/PSR2 + Y-coordinate + Pixel Encoding/Colorimetry
Format indication. A DP Source device is allowed to indicate the pixel
encoding/colorimetry format to the DP Sink device with VSC SDP only when
the DP Sink device supports it (
i.e.,VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED bit in the
DPRX_FEATURE_ENUMERATION_LIST register (DPCD Address 02210h, bit 3;
is set to 1).

v2: (Jani)
- Change DP_PSR_Y_COORDINATE to DP_PSR2_SU_Y_COORDINATE_REQUIRED.
- Add DP_PSR2_SU_GRANULARITY_REQUIRED.
- Change DPRX_FEATURE_ENUMERATION_LIST to DP_DPRX.
- Add GTC_CAP and AV_SYNC_CAP, other bits in DPRX_FEATURE_ENUMERATION_LIST.

Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Cc: Jim Bride <jim.bride at linux.intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju at intel.com>
---
 include/drm/drm_dp_helper.h | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 55bbeb0..ee2a649d 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -194,7 +194,8 @@
 # define DP_PSR_SETUP_TIME_0                (6 << 1)
 # define DP_PSR_SETUP_TIME_MASK             (7 << 1)
 # define DP_PSR_SETUP_TIME_SHIFT            1
-
+# define DP_PSR2_SU_Y_COORDINATE_REQUIRED   (1 << 4)  /* eDP 1.4a */
+# define DP_PSR2_SU_GRANULARITY_REQUIRED    (1 << 5)  /* eDP 1.4b */
 /*
  * 0x80-0x8f describe downstream port capabilities, but there are two layouts
  * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set.  If it was not,
@@ -568,6 +569,11 @@
 #define DP_RECEIVER_ALPM_STATUS		    0x200b  /* eDP 1.4 */
 # define DP_ALPM_LOCK_TIMEOUT_ERROR	    (1 << 0)
 
+#define DP_DPRX_FEATURE_ENUMERATION_LIST    0x2210
+# define DP_GTC_CAP					(1 << 0)
+# define DP_AV_SYNC_CAP					(1 << 2)
+# define DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED	(1 << 3)
+
 /* DP 1.2 Sideband message defines */
 /* peer device type - DP 1.2a Table 2-92 */
 #define DP_PEER_DEVICE_NONE		0x0
-- 
1.9.1