[Intel-gfx] [PATCH] drm/i915: Sink CRC: tune down error message at stop to debug_kms.

[Zanoni, Paulo R]

Em Qua, 2016-01-13 às 14:05 -0800, Rodrigo Vivi escreveu:
> When we stop the sink CRC calculation we wait a while until the
> counter
> is reset to zero and return -ETIMEDOUT. However the sink crc was
> calculated already by this point so we just ignore this return at
> the main function.
> 
> So, let's also ignore the message and put it as a debug message
> instead
> of an error one. The message might still be useful when debuging
> test failures so we could be able to know something was not going so
> well with sink crc stop.
> Reference: https://bugs.freedesktop.org/show_bug.cgi?id=93694
> Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_dp.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp.c
> b/drivers/gpu/drm/i915/intel_dp.c
> index c8f58ab..22f6887 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -4009,7 +4009,7 @@ static int intel_dp_sink_crc_stop(struct
> intel_dp *intel_dp)
>  	} while (--attempts && count);

Now I'm wondering if "count" stays static or changes during the 10
failed attempts. I know this is against the spec, but would make some
sense to see it.

Another possibility is that we're not changing the contents of the
frame, so maybe we need to give it something new in order for the count
to really reset. This would make more sense for PSR.

Anyway, this "error" shouldn't be a problem for our test suite. If it
impacts the next CRC calculations, then we'll notice this through other
means, so:
Reviewed-by: Paulo Zanoni <paulo.r.zanoni at intel.com>

>  
>  	if (attempts == 0) {
> -		DRM_ERROR("TIMEOUT: Sink CRC counter is not
> zeroed\n");
> +		DRM_DEBUG_KMS("TIMEOUT: Sink CRC counter is not
> zeroed\n");
>  		ret = -ETIMEDOUT;
>  	}
>