[Intel-gfx] [PATCH] drm/i915: BXT DDI PHY sequence BUN

[Kannan, Vandana]

> -----Original Message-----
> From: Ville Syrjälä [mailto:ville.syrjala at linux.intel.com]
> Sent: Monday, March 21, 2016 7:34 PM
> To: Kannan, Vandana <vandana.kannan at intel.com>
> Cc: intel-gfx at lists.freedesktop.org
> Subject: Re: [Intel-gfx] [PATCH] drm/i915: BXT DDI PHY sequence BUN
> 
> On Mon, Mar 21, 2016 at 12:12:40PM +0530, Vandana Kannan wrote:
> > According to the BSpec update, bit 7 of PORT_CL1CM_DW0 register
> needs
> > to be checked to ensure that the register is in accessible state.
> > Also, based on a BSpec update, changing the timeout value to check
> > iphypwrgood, from 10ms to wait for up to 100us.
> >
> > Signed-off-by: Vandana Kannan <vandana.kannan at intel.com>
> > Reported-by: Philippe Lecluse <Philippe.Lecluse at intel.com>
> > Cc: Deak, Imre <imre.deak at intel.com>
> > ---
> >  drivers/gpu/drm/i915/i915_reg.h  |  1 +
> > drivers/gpu/drm/i915/intel_ddi.c | 11 +++++++++--
> >  2 files changed, 10 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h index 7dfc400..9a02bfc 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -1318,6 +1318,7 @@ enum skl_disp_power_wells {
> >  #define _PORT_CL1CM_DW0_A		0x162000
> >  #define _PORT_CL1CM_DW0_BC		0x6C000
> >  #define   PHY_POWER_GOOD		(1 << 16)
> > +#define   PHY_RESERVED			(1 << 7)
> >  #define BXT_PORT_CL1CM_DW0(phy)		_BXT_PHY((phy),
> _PORT_CL1CM_DW0_BC, \
> >  							_PORT_CL1CM_DW0_A)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> > b/drivers/gpu/drm/i915/intel_ddi.c
> > index 62de9f4..354f949 100644
> > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > @@ -2669,9 +2669,16 @@ static void broxton_phy_init(struct
> drm_i915_private *dev_priv,
> >  	val |= GT_DISPLAY_POWER_ON(phy);
> >  	I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val);
> >
> > -	/* Considering 10ms timeout until BSpec is updated */
> > -	if (wait_for(I915_READ(BXT_PORT_CL1CM_DW0(phy)) &
> PHY_POWER_GOOD, 10))
> > +	/*
> > +	 * HW team confirmed that the time to reach phypowergood status
> is
> > +	 * anywhere between 50 us and 100us.
> > +	 */
> > +	if (wait_for_atomic_us(((!(I915_READ(BXT_PORT_CL1CM_DW0(phy))
> &
> 
> Switching to atomic wait seems silly.
> 
[Vandana] You think wait_for_us should suffice here? 

> > +				PHY_RESERVED)) &&
> > +				((I915_READ(BXT_PORT_CL1CM_DW0(phy)) &
> > +				  PHY_POWER_GOOD) ==
> PHY_POWER_GOOD)), 100)) {
> >  		DRM_ERROR("timeout during PHY%d power on\n", phy);
> > +	}
> >
> >  	for (port =  (phy == DPIO_PHY0 ? PORT_B : PORT_A);
> >  	     port <= (phy == DPIO_PHY0 ? PORT_C : PORT_A); port++) {
> > --
> > 1.9.1
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> --
> Ville Syrjälä
> Intel OTC