[Intel-gfx] [PATCH] drm/i915: BXT DDI PHY sequence BUN

[Imre Deak]

On ke, 2016-03-23 at 04:43 +0000, Kannan, Vandana wrote:
> > -----Original Message-----
> > From: Ville Syrjälä [mailto:ville.syrjala at linux.intel.com]
> > Sent: Monday, March 21, 2016 7:34 PM
> > To: Kannan, Vandana <vandana.kannan at intel.com>
> > Cc: intel-gfx at lists.freedesktop.org
> > Subject: Re: [Intel-gfx] [PATCH] drm/i915: BXT DDI PHY sequence BUN
> > 
> > On Mon, Mar 21, 2016 at 12:12:40PM +0530, Vandana Kannan wrote:
> > > According to the BSpec update, bit 7 of PORT_CL1CM_DW0 register
> > needs
> > > to be checked to ensure that the register is in accessible state.
> > > Also, based on a BSpec update, changing the timeout value to check
> > > iphypwrgood, from 10ms to wait for up to 100us.
> > > 
> > > Signed-off-by: Vandana Kannan <vandana.kannan at intel.com>
> > > Reported-by: Philippe Lecluse <Philippe.Lecluse at intel.com>
> > > Cc: Deak, Imre <imre.deak at intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/i915_reg.h  |  1 +
> > > drivers/gpu/drm/i915/intel_ddi.c | 11 +++++++++--
> > >  2 files changed, 10 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > > b/drivers/gpu/drm/i915/i915_reg.h index 7dfc400..9a02bfc 100644
> > > --- a/drivers/gpu/drm/i915/i915_reg.h
> > > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > > @@ -1318,6 +1318,7 @@ enum skl_disp_power_wells {
> > >  #define _PORT_CL1CM_DW0_A		0x162000
> > >  #define _PORT_CL1CM_DW0_BC		0x6C000
> > >  #define   PHY_POWER_GOOD		(1 << 16)
> > > +#define   PHY_RESERVED			(1 << 7)
> > >  #define BXT_PORT_CL1CM_DW0(phy)		_BXT_PHY((phy),
> > _PORT_CL1CM_DW0_BC, \
> > >  							_PORT_CL1CM_DW0_A)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> > > b/drivers/gpu/drm/i915/intel_ddi.c
> > > index 62de9f4..354f949 100644
> > > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > > @@ -2669,9 +2669,16 @@ static void broxton_phy_init(struct
> > drm_i915_private *dev_priv,
> > >  	val |= GT_DISPLAY_POWER_ON(phy);
> > >  	I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val);
> > > 
> > > -	/* Considering 10ms timeout until BSpec is updated */
> > > -	if (wait_for(I915_READ(BXT_PORT_CL1CM_DW0(phy)) &
> > PHY_POWER_GOOD, 10))
> > > +	/*
> > > +	 * HW team confirmed that the time to reach phypowergood status
> > is
> > > +	 * anywhere between 50 us and 100us.
> > > +	 */
> > > +	if (wait_for_atomic_us(((!(I915_READ(BXT_PORT_CL1CM_DW0(phy))
> > &
> > 
> > Switching to atomic wait seems silly.
> > 
> [Vandana] You think wait_for_us should suffice here? 

Yes.

> > > +				PHY_RESERVED)) &&
> > > +				((I915_READ(BXT_PORT_CL1CM_DW0(phy)) &
> > > +				  PHY_POWER_GOOD) ==
> > PHY_POWER_GOOD)), 100)) {
> > >  		DRM_ERROR("timeout during PHY%d power on\n", phy);
> > > +	}

Please also add a comment on how the detection magic works: Reading any
PHY register while the PHY is powered down will result in all register
bits set, while the reserved bit 7 is guaranteed to be 0 when the PHY
is powered up.

--Imre

> > > 
> > >  	for (port =  (phy == DPIO_PHY0 ? PORT_B : PORT_A);
> > >  	     port <= (phy == DPIO_PHY0 ? PORT_C : PORT_A); port++) {
> > > --
> > > 1.9.1
> > > 
> > > _______________________________________________
> > > Intel-gfx mailing list
> > > Intel-gfx at lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> > 
> > --
> > Ville Syrjälä
> > Intel OTC
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx