[Intel-gfx] [PATCH i-g-t v2] tests/kms_frontbuffer_tracking: increase FBC wait timeout to 5s

[Lofstedt, Marta]

> -----Original Message-----
> From: Lofstedt, Marta
> Sent: Friday, August 25, 2017 2:54 PM
> To: 'Chris Wilson' <chris at chris-wilson.co.uk>; intel-gfx at lists.freedesktop.org
> Subject: RE: [Intel-gfx] [PATCH i-g-t v2] tests/kms_frontbuffer_tracking:
> increase FBC wait timeout to 5s
> 
> 
> 
> > -----Original Message-----
> > From: Chris Wilson [mailto:chris at chris-wilson.co.uk]
> > Sent: Friday, August 25, 2017 1:47 PM
> > To: Lofstedt, Marta <marta.lofstedt at intel.com>; intel-
> > gfx at lists.freedesktop.org
> > Subject: Re: [Intel-gfx] [PATCH i-g-t v2] tests/kms_frontbuffer_tracking:
> > increase FBC wait timeout to 5s
> >
> > Quoting Marta Lofstedt (2017-08-25 11:40:29)
> > > From: "Lofstedt, Marta" <marta.lofstedt at intel.com>
> > >
> > > The subtests: igt at kms_frontbuffer_tracking@fbc-*draw*
> > > has non-consistent results, pending between fail and pass.
> > > The fails are always due to "FBC disabled".
> > > With this increase in timeout the flip-flop behavior is no longer
> > > reproducible.
> > >
> > > This is a partial revert of:
> > > 64590c7b768dc8d8dd962f812d5ff5a39e7e8b54,
> > > where the timeout was decreased from 5s to 2s.
> > > After investigating the timeout needed, the conclusion is that the
> > > longer timeout is only needed when the test swaps between some
> > > specific draw domains, typically blt vs. mmap_cpu.
> > > The objective of the FBC part of the tests is not to benchmark draw
> > > domain changes, it is to check that FBC was (re-)enabled.
> > >
> > > V2: Added documentation
> > >
> > > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101623
> > > Signed-off-by: Marta Lofstedt <marta.lofstedt at intel.com>
> > > Acked-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
> > > ---
> > >  tests/kms_frontbuffer_tracking.c | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/tests/kms_frontbuffer_tracking.c
> > > b/tests/kms_frontbuffer_tracking.c
> > > index e03524f1..2538450c 100644
> > > --- a/tests/kms_frontbuffer_tracking.c
> > > +++ b/tests/kms_frontbuffer_tracking.c
> > > @@ -924,7 +924,7 @@ static bool fbc_stride_not_supported(void)
> > >
> > >  static bool fbc_wait_until_enabled(void)  {
> >
> > Try igt_drop_caches_set(device, DROP_RETIRE); instead of relaxing the
> > timeout.
> > -Chris
> 
> OK, I will test that and do a V3 if it works!
> /Marta

I did some initial testing with igt_drop_caches_set inside fbc_wait_until_enabled and it looks good, I will add this to my weekend tests to get more results. This also appear to improve the runtime of the tests quite a bit. So, maybe the igt_drop_caches_set should be placed somewhere else so it will give runtime improvements not only for the FBC related sub-tests.
/Marta