[Intel-gfx] [PATCH 01/10] drm/i915/uc: Rename intel_?uc_{setup, load}() to _init_hw()

Arkadiusz Hiler arkadiusz.hiler at intel.com
Thu Mar 2 16:03:45 UTC 2017


GuC historically has two "startup" functions called _init() and _setup()

Then HuC came with it's _init() and _load().

This commit renames intel_guc_setup() and intel_huc_load() to
*uc_init_hw() as they called from the i915_gem_init_hw().

The aim is to be consistent in that entry points called during
particular driver init phases (e.g. init_hw) are all suffixed by that
phase. When reading the leaf functions, it should be clear at what stage
during the driver load it is called and therefore what operations are
legal at that point.

v2: commit message update (Chris Wilson)

Cc: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski at intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko at intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler at intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko at intel.com>
---
 drivers/gpu/drm/i915/i915_gem.c         |  2 +-
 drivers/gpu/drm/i915/intel_guc_loader.c | 14 +++++++-------
 drivers/gpu/drm/i915/intel_huc.c        |  6 +++---
 drivers/gpu/drm/i915/intel_uc.h         |  4 ++--
 4 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 7a723b1..29c3bba 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4454,7 +4454,7 @@ int i915_gem_init_hw(struct drm_i915_private *dev_priv)
 	intel_mocs_init_l3cc_table(dev_priv);
 
 	/* We can't enable contexts until all firmware is loaded */
-	ret = intel_guc_setup(dev_priv);
+	ret = intel_guc_init_hw(dev_priv);
 	if (ret)
 		goto out;
 
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
index 9885f76..9f09e26 100644
--- a/drivers/gpu/drm/i915/intel_guc_loader.c
+++ b/drivers/gpu/drm/i915/intel_guc_loader.c
@@ -428,19 +428,19 @@ static int guc_hw_reset(struct drm_i915_private *dev_priv)
 }
 
 /**
- * intel_guc_setup() - finish preparing the GuC for activity
+ * intel_guc_init_hw() - finish preparing the GuC for activity
  * @dev_priv:	i915 device private
  *
- * Called from gem_init_hw() during driver loading and also after a GPU reset.
+ * Called during driver loading and also after a GPU reset.
  *
  * The main action required here it to load the GuC uCode into the device.
  * The firmware image should have already been fetched into memory by the
- * earlier call to intel_guc_init(), so here we need only check that worked,
- * and then transfer the image to the h/w.
+ * earlier call to intel_guc_init(), so here we need only check that
+ * worked, and then transfer the image to the h/w.
  *
  * Return:	non-zero code on error
  */
-int intel_guc_setup(struct drm_i915_private *dev_priv)
+int intel_guc_init_hw(struct drm_i915_private *dev_priv)
 {
 	struct intel_uc_fw *guc_fw = &dev_priv->guc.fw;
 	const char *fw_path = guc_fw->path;
@@ -506,7 +506,7 @@ int intel_guc_setup(struct drm_i915_private *dev_priv)
 		if (err)
 			goto fail;
 
-		intel_huc_load(dev_priv);
+		intel_huc_init_hw(dev_priv);
 		err = guc_ucode_xfer(dev_priv);
 		if (!err)
 			break;
@@ -729,7 +729,7 @@ void intel_uc_fw_fetch(struct drm_i915_private *dev_priv,
  * Called early during driver load, but after GEM is initialised.
  *
  * The firmware will be transferred to the GuC's memory later,
- * when intel_guc_setup() is called.
+ * when intel_guc_init_hw() is called.
  */
 void intel_guc_init(struct drm_i915_private *dev_priv)
 {
diff --git a/drivers/gpu/drm/i915/intel_huc.c b/drivers/gpu/drm/i915/intel_huc.c
index c28543d..babe0eb 100644
--- a/drivers/gpu/drm/i915/intel_huc.c
+++ b/drivers/gpu/drm/i915/intel_huc.c
@@ -150,7 +150,7 @@ static int huc_ucode_xfer(struct drm_i915_private *dev_priv)
  * is not capable or driver yet support it. And there will be no error message
  * for INTEL_UC_FIRMWARE_NONE cases.
  *
- * The DMA-copying to HW is done later when intel_huc_load() is called.
+ * The DMA-copying to HW is done later when intel_huc_init_hw() is called.
  */
 void intel_huc_init(struct drm_i915_private *dev_priv)
 {
@@ -191,7 +191,7 @@ void intel_huc_init(struct drm_i915_private *dev_priv)
 }
 
 /**
- * intel_huc_load() - load HuC uCode to device
+ * intel_huc_init_hw() - load HuC uCode to device
  * @dev_priv: the drm_i915_private device
  *
  * Called from guc_setup() during driver loading and also after a GPU reset.
@@ -203,7 +203,7 @@ void intel_huc_init(struct drm_i915_private *dev_priv)
  *
  * Return:	non-zero code on error
  */
-int intel_huc_load(struct drm_i915_private *dev_priv)
+int intel_huc_init_hw(struct drm_i915_private *dev_priv)
 {
 	struct intel_uc_fw *huc_fw = &dev_priv->huc.fw;
 	int err;
diff --git a/drivers/gpu/drm/i915/intel_uc.h b/drivers/gpu/drm/i915/intel_uc.h
index d74f4d3..dd34a1b 100644
--- a/drivers/gpu/drm/i915/intel_uc.h
+++ b/drivers/gpu/drm/i915/intel_uc.h
@@ -190,7 +190,7 @@ int intel_guc_sample_forcewake(struct intel_guc *guc);
 
 /* intel_guc_loader.c */
 extern void intel_guc_init(struct drm_i915_private *dev_priv);
-extern int intel_guc_setup(struct drm_i915_private *dev_priv);
+extern int intel_guc_init_hw(struct drm_i915_private *dev_priv);
 extern void intel_guc_fini(struct drm_i915_private *dev_priv);
 extern const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
 extern int intel_guc_suspend(struct drm_i915_private *dev_priv);
@@ -225,7 +225,7 @@ static inline u32 guc_ggtt_offset(struct i915_vma *vma)
 /* intel_huc.c */
 void intel_huc_init(struct drm_i915_private *dev_priv);
 void intel_huc_fini(struct drm_i915_private  *dev_priv);
-int intel_huc_load(struct drm_i915_private *dev_priv);
+int intel_huc_init_hw(struct drm_i915_private *dev_priv);
 void intel_guc_auth_huc(struct drm_i915_private *dev_priv);
 
 #endif
-- 
2.9.3



More information about the Intel-gfx mailing list