[Intel-gfx] [PATCH v4 2/2] drm: Add HDMI 2.0 VIC support for AVI info-frames

[Jose Abreu]

Hi Shashank,


On 23-03-2017 15:14, Shashank Sharma wrote:
> HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64).
> For any other mode, the VIC filed in AVI infoframes should be 0.
> HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is
> extended to (VIC 1-107).
>
> This patch adds a bool input variable, which indicates if the connected
> sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a
> HDMI 2.0 VIC to a HDMI 1.4 sink.
>
> This patch touches all drm drivers, who are callers of this function
> drm_hdmi_avi_infoframe_from_display_mode but to make sure there is
> no change in current behavior, is_hdmi2 is kept as false.
>
> In case of I915 driver, this patch checks the connector->display_info
> to check if the connected display is HDMI 2.0.
>
> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> Cc: Jose Abreu <jose.abreu at synopsys.com>
> Cc: Andrzej Hajda <a.hajda at samsung.com>
> Cc: Alex Deucher <alexander.deucher at amd.com>
> Cc: Daniel Vetter <daniel.vetter at intel.com>
>
> PS: This patch touches a few lines in few files, which were
> already above 80 char, so checkpatch gives 80 char warning again.
> - gpu/drm/omapdrm/omap_encoder.c
> - gpu/drm/i915/intel_sdvo.c
>
> Signed-off-by: Shashank Sharma <shashank.sharma at intel.com>
> ---
>  drivers/gpu/drm/amd/amdgpu/dce_v10_0.c    |  2 +-
>  drivers/gpu/drm/amd/amdgpu/dce_v11_0.c    |  2 +-
>  drivers/gpu/drm/amd/amdgpu/dce_v8_0.c     |  2 +-
>  drivers/gpu/drm/bridge/analogix-anx78xx.c |  3 ++-
>  drivers/gpu/drm/bridge/sii902x.c          |  2 +-
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c |  2 +-
>  drivers/gpu/drm/drm_edid.c                | 12 +++++++++++-
>  drivers/gpu/drm/exynos/exynos_hdmi.c      |  2 +-
>  drivers/gpu/drm/i2c/tda998x_drv.c         |  2 +-
>  drivers/gpu/drm/i915/intel_hdmi.c         |  5 ++++-
>  drivers/gpu/drm/i915/intel_sdvo.c         |  3 ++-
>  drivers/gpu/drm/mediatek/mtk_hdmi.c       |  2 +-
>  drivers/gpu/drm/omapdrm/omap_encoder.c    |  3 ++-
>  drivers/gpu/drm/radeon/radeon_audio.c     |  2 +-
>  drivers/gpu/drm/rockchip/inno_hdmi.c      |  2 +-
>  drivers/gpu/drm/sti/sti_hdmi.c            |  2 +-
>  drivers/gpu/drm/tegra/hdmi.c              |  2 +-
>  drivers/gpu/drm/tegra/sor.c               |  2 +-
>  drivers/gpu/drm/vc4/vc4_hdmi.c            |  2 +-
>  drivers/gpu/drm/zte/zx_hdmi.c             |  2 +-
>  include/drm/drm_edid.h                    |  3 ++-
>  21 files changed, 38 insertions(+), 21 deletions(-)
>

[snip]

> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index af93f7a..5ff2886 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -1146,7 +1146,7 @@ static void hdmi_config_AVI(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
>  	u8 val;
>  
>  	/* Initialise info frame from DRM mode */
> -	drm_hdmi_avi_infoframe_from_display_mode(&frame, mode);
> +	drm_hdmi_avi_infoframe_from_display_mode(&frame, mode, false);
>  
>  	if (hdmi->hdmi_data.enc_out_format == YCBCR444)
>  		frame.colorspace = HDMI_COLORSPACE_YUV444;
>

dw-hdmi controller has full support for HDMI 2.0 features. It all
depends on the platform it is integrated.

I think adding a parameter to
drm_hdmi_avi_infoframe_from_display_mode is not the best idea
because of this case: A bridge can have support for HDMI 2.0
features but the platform may limit this support. I guess it can
happen in other drivers too.

Best regards,
Jose Miguel Abreu