[Intel-gfx] [PATCH v4 2/2] drm: Add HDMI 2.0 VIC support for AVI info-frames
Ville Syrjälä
ville.syrjala at linux.intel.com
Thu Mar 23 15:45:28 UTC 2017
On Thu, Mar 23, 2017 at 03:28:29PM +0000, Jose Abreu wrote:
> Hi Shashank,
>
>
> On 23-03-2017 15:14, Shashank Sharma wrote:
> > HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64).
> > For any other mode, the VIC filed in AVI infoframes should be 0.
> > HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is
> > extended to (VIC 1-107).
> >
> > This patch adds a bool input variable, which indicates if the connected
> > sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a
> > HDMI 2.0 VIC to a HDMI 1.4 sink.
> >
> > This patch touches all drm drivers, who are callers of this function
> > drm_hdmi_avi_infoframe_from_display_mode but to make sure there is
> > no change in current behavior, is_hdmi2 is kept as false.
> >
> > In case of I915 driver, this patch checks the connector->display_info
> > to check if the connected display is HDMI 2.0.
> >
> > Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> > Cc: Jose Abreu <jose.abreu at synopsys.com>
> > Cc: Andrzej Hajda <a.hajda at samsung.com>
> > Cc: Alex Deucher <alexander.deucher at amd.com>
> > Cc: Daniel Vetter <daniel.vetter at intel.com>
> >
> > PS: This patch touches a few lines in few files, which were
> > already above 80 char, so checkpatch gives 80 char warning again.
> > - gpu/drm/omapdrm/omap_encoder.c
> > - gpu/drm/i915/intel_sdvo.c
> >
> > Signed-off-by: Shashank Sharma <shashank.sharma at intel.com>
> > ---
> > drivers/gpu/drm/amd/amdgpu/dce_v10_0.c | 2 +-
> > drivers/gpu/drm/amd/amdgpu/dce_v11_0.c | 2 +-
> > drivers/gpu/drm/amd/amdgpu/dce_v8_0.c | 2 +-
> > drivers/gpu/drm/bridge/analogix-anx78xx.c | 3 ++-
> > drivers/gpu/drm/bridge/sii902x.c | 2 +-
> > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 +-
> > drivers/gpu/drm/drm_edid.c | 12 +++++++++++-
> > drivers/gpu/drm/exynos/exynos_hdmi.c | 2 +-
> > drivers/gpu/drm/i2c/tda998x_drv.c | 2 +-
> > drivers/gpu/drm/i915/intel_hdmi.c | 5 ++++-
> > drivers/gpu/drm/i915/intel_sdvo.c | 3 ++-
> > drivers/gpu/drm/mediatek/mtk_hdmi.c | 2 +-
> > drivers/gpu/drm/omapdrm/omap_encoder.c | 3 ++-
> > drivers/gpu/drm/radeon/radeon_audio.c | 2 +-
> > drivers/gpu/drm/rockchip/inno_hdmi.c | 2 +-
> > drivers/gpu/drm/sti/sti_hdmi.c | 2 +-
> > drivers/gpu/drm/tegra/hdmi.c | 2 +-
> > drivers/gpu/drm/tegra/sor.c | 2 +-
> > drivers/gpu/drm/vc4/vc4_hdmi.c | 2 +-
> > drivers/gpu/drm/zte/zx_hdmi.c | 2 +-
> > include/drm/drm_edid.h | 3 ++-
> > 21 files changed, 38 insertions(+), 21 deletions(-)
> >
>
> [snip]
>
> > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > index af93f7a..5ff2886 100644
> > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > @@ -1146,7 +1146,7 @@ static void hdmi_config_AVI(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
> > u8 val;
> >
> > /* Initialise info frame from DRM mode */
> > - drm_hdmi_avi_infoframe_from_display_mode(&frame, mode);
> > + drm_hdmi_avi_infoframe_from_display_mode(&frame, mode, false);
> >
> > if (hdmi->hdmi_data.enc_out_format == YCBCR444)
> > frame.colorspace = HDMI_COLORSPACE_YUV444;
> >
>
> dw-hdmi controller has full support for HDMI 2.0 features. It all
> depends on the platform it is integrated.
>
> I think adding a parameter to
> drm_hdmi_avi_infoframe_from_display_mode is not the best idea
> because of this case: A bridge can have support for HDMI 2.0
> features but the platform may limit this support. I guess it can
> happen in other drivers too.
Your driver is in full control of what gets passed here. So I don't see
why that would be a problem.
Also this doesn't really have anything to do with the capabilities of
the source. All we want to make sure is that we don't send a VIC the
sink will not understand.
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list