[Intel-gfx] [PATCH] Revert "drm/i915/bxt: Disable device ready before shutdown command"

[Jani Nikula]

On Tue, 05 Sep 2017, Mika Kahola <mika.kahola at intel.com> wrote:
> The revert patch solved the issue
>
> *ERROR* Video mode command 0x00000041 send failed.
>
> on my setup with APL+MIPI/DSI single link combo.
>
> Tested-by: Mika Kahola <mika.kahola at intel.com>

Pushed to dinq, thanks for the patch and testing. Alas, I failed to add
your Tested-by tag, apologies.

BR,
Jani.


>
>
> On Tue, 2017-09-05 at 15:14 +0530, Vidya Srinivas wrote:
>> From: Uma Shankar <uma.shankar at intel.com>
>> 
>> This reverts commit bbdf0b2ff32aa75c7bd167569130e9391d2e6282.
>> 
>> Disable device ready before shutdown command was added previously to
>> avoid a
>> split screen issue seen on dual link DSI panels. As of now, dual link
>> is not
>> supported and will need some rework in the upstream code. For single
>> link DSI
>> panels, the change is not required. This will cause failure in
>> sending SHUTDOWN
>> packet during disable. Hence reverting the change. Will handle the
>> change
>> as part of dual link enabling in upstream.
>> 
>> Signed-off-by: Uma Shankar <uma.shankar at intel.com>
>> Signed-off-by: Vidya Srinivas <vidya.srinivas at intel.com>
>> ---
>>  drivers/gpu/drm/i915/intel_dsi.c | 11 -----------
>>  1 file changed, 11 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/i915/intel_dsi.c
>> b/drivers/gpu/drm/i915/intel_dsi.c
>> index 2a0f5d3..fc25d7d 100644
>> --- a/drivers/gpu/drm/i915/intel_dsi.c
>> +++ b/drivers/gpu/drm/i915/intel_dsi.c
>> @@ -892,8 +892,6 @@ static void intel_dsi_disable(struct
>> intel_encoder *encoder,
>>  			      const struct intel_crtc_state
>> *old_crtc_state,
>>  			      const struct drm_connector_state
>> *old_conn_state)
>>  {
>> -	struct drm_device *dev = encoder->base.dev;
>> -	struct drm_i915_private *dev_priv = dev->dev_private;
>>  	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder-
>> >base);
>>  	enum port port;
>>  
>> @@ -903,15 +901,6 @@ static void intel_dsi_disable(struct
>> intel_encoder *encoder,
>>  	intel_panel_disable_backlight(old_conn_state);
>>  
>>  	/*
>> -	 * Disable Device ready before the port shutdown in order
>> -	 * to avoid split screen
>> -	 */
>> -	if (IS_BROXTON(dev_priv)) {
>> -		for_each_dsi_port(port, intel_dsi->ports)
>> -			I915_WRITE(MIPI_DEVICE_READY(port), 0);
>> -	}
>> -
>> -	/*
>>  	 * According to the spec we should send SHUTDOWN before
>>  	 * MIPI_SEQ_DISPLAY_OFF only for v3+ VBTs, but field testing
>>  	 * has shown that the v3 sequence works for v2 VBTs too

-- 
Jani Nikula, Intel Open Source Technology Center