[Intel-gfx] [PATCH 3/8] drm/i915: Eliminate crtc->config from VLV/CHV DPLL functions

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Use the passed in crtc state rather than crtc->config when configuring
the DPLL on VLV/CHV.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index ef836fe3eacd..23fead59b825 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5831,11 +5831,11 @@ static void valleyview_crtc_enable(struct intel_crtc_state *pipe_config,
 	intel_encoders_pre_pll_enable(crtc, pipe_config, old_state);
 
 	if (IS_CHERRYVIEW(dev_priv)) {
-		chv_prepare_pll(intel_crtc, intel_crtc->config);
-		chv_enable_pll(intel_crtc, intel_crtc->config);
+		chv_prepare_pll(intel_crtc, pipe_config);
+		chv_enable_pll(intel_crtc, pipe_config);
 	} else {
-		vlv_prepare_pll(intel_crtc, intel_crtc->config);
-		vlv_enable_pll(intel_crtc, intel_crtc->config);
+		vlv_prepare_pll(intel_crtc, pipe_config);
+		vlv_enable_pll(intel_crtc, pipe_config);
 	}
 
 	intel_encoders_pre_enable(crtc, pipe_config, old_state);
@@ -6735,8 +6735,8 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
 
 	/* Set HBR and RBR LPF coefficients */
 	if (pipe_config->port_clock == 162000 ||
-	    intel_crtc_has_type(crtc->config, INTEL_OUTPUT_ANALOG) ||
-	    intel_crtc_has_type(crtc->config, INTEL_OUTPUT_HDMI))
+	    intel_crtc_has_type(pipe_config, INTEL_OUTPUT_ANALOG) ||
+	    intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI))
 		vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
 				 0x009f0003);
 	else
@@ -6763,7 +6763,7 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
 
 	coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
 	coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
-	if (intel_crtc_has_dp_encoder(crtc->config))
+	if (intel_crtc_has_dp_encoder(pipe_config))
 		coreclk |= 0x01000000;
 	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
 
-- 
2.13.5