[Intel-gfx] [PATCH 2/7] drm/i915/dp: move link_bw and rate_select debugging where used

[Jani Nikula]

The debug prints make more sense where the results are actually used,
and this cleans up extra clutter from the already overcrowded
intel_dp_compute_config().

Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c               | 9 ++-------
 drivers/gpu/drm/i915/intel_dp_link_training.c | 5 +++++
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 5f4b30faf6a2..81cf363e71af 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1706,7 +1706,6 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	int bpp, mode_rate;
 	int link_avail, link_clock;
 	int common_len;
-	uint8_t link_bw, rate_select;
 	bool reduce_m_n = drm_dp_has_quirk(&intel_dp->desc,
 					   DP_DPCD_QUIRK_LIMITED_M_N);
 
@@ -1852,12 +1851,8 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	pipe_config->pipe_bpp = bpp;
 	pipe_config->port_clock = intel_dp->common_rates[clock];
 
-	intel_dp_compute_rate(intel_dp, pipe_config->port_clock,
-			      &link_bw, &rate_select);
-
-	DRM_DEBUG_KMS("DP link bw %02x rate select %02x lane count %d clock %d bpp %d\n",
-		      link_bw, rate_select, pipe_config->lane_count,
-		      pipe_config->port_clock, bpp);
+	DRM_DEBUG_KMS("DP lane count %d clock %d bpp %d\n",
+		      pipe_config->lane_count, pipe_config->port_clock, bpp);
 	DRM_DEBUG_KMS("DP link bw required %i available %i\n",
 		      mode_rate, link_avail);
 
diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c b/drivers/gpu/drm/i915/intel_dp_link_training.c
index f59b59bb0a21..3fcaa98b9055 100644
--- a/drivers/gpu/drm/i915/intel_dp_link_training.c
+++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
@@ -139,6 +139,11 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
 	intel_dp_compute_rate(intel_dp, intel_dp->link_rate,
 			      &link_bw, &rate_select);
 
+	if (link_bw)
+		DRM_DEBUG_KMS("Using LINK_BW_SET value %02x\n", link_bw);
+	else
+		DRM_DEBUG_KMS("Using LINK_RATE_SET value %02x\n", rate_select);
+
 	/* Write the link configuration data */
 	link_config[0] = link_bw;
 	link_config[1] = intel_dp->lane_count;
-- 
2.11.0