[Intel-gfx] [PATCH 2/7] drm/i915/dp: move link_bw and rate_select debugging where used
Rodrigo Vivi
rodrigo.vivi at intel.com
Thu Apr 5 17:22:38 UTC 2018
On Thu, Apr 05, 2018 at 05:39:00PM +0300, Jani Nikula wrote:
> The debug prints make more sense where the results are actually used,
> and this cleans up extra clutter from the already overcrowded
> intel_dp_compute_config().
>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 9 ++-------
> drivers/gpu/drm/i915/intel_dp_link_training.c | 5 +++++
> 2 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 5f4b30faf6a2..81cf363e71af 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1706,7 +1706,6 @@ intel_dp_compute_config(struct intel_encoder *encoder,
> int bpp, mode_rate;
> int link_avail, link_clock;
> int common_len;
> - uint8_t link_bw, rate_select;
> bool reduce_m_n = drm_dp_has_quirk(&intel_dp->desc,
> DP_DPCD_QUIRK_LIMITED_M_N);
>
> @@ -1852,12 +1851,8 @@ intel_dp_compute_config(struct intel_encoder *encoder,
> pipe_config->pipe_bpp = bpp;
> pipe_config->port_clock = intel_dp->common_rates[clock];
>
> - intel_dp_compute_rate(intel_dp, pipe_config->port_clock,
> - &link_bw, &rate_select);
the commit message state more about the debug message itself,
but by removing this call here it seems that you change
the behavior of eDP. So I couldn't follow the changes you are
actually aiming to do here.
> -
> - DRM_DEBUG_KMS("DP link bw %02x rate select %02x lane count %d clock %d bpp %d\n",
> - link_bw, rate_select, pipe_config->lane_count,
> - pipe_config->port_clock, bpp);
> + DRM_DEBUG_KMS("DP lane count %d clock %d bpp %d\n",
> + pipe_config->lane_count, pipe_config->port_clock, bpp);
> DRM_DEBUG_KMS("DP link bw required %i available %i\n",
> mode_rate, link_avail);
>
> diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c b/drivers/gpu/drm/i915/intel_dp_link_training.c
> index f59b59bb0a21..3fcaa98b9055 100644
> --- a/drivers/gpu/drm/i915/intel_dp_link_training.c
> +++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
> @@ -139,6 +139,11 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
> intel_dp_compute_rate(intel_dp, intel_dp->link_rate,
> &link_bw, &rate_select);
>
> + if (link_bw)
> + DRM_DEBUG_KMS("Using LINK_BW_SET value %02x\n", link_bw);
> + else
> + DRM_DEBUG_KMS("Using LINK_RATE_SET value %02x\n", rate_select);
> +
> /* Write the link configuration data */
> link_config[0] = link_bw;
> link_config[1] = intel_dp->lane_count;
> --
> 2.11.0
>
More information about the Intel-gfx
mailing list