[Intel-gfx] [PATCH 01/17] drm/i915/icl: add definitions for the ICL PLL registers
Paulo Zanoni
paulo.r.zanoni at intel.com
Thu Feb 22 03:55:03 UTC 2018
There's a lot of code for the PLL enabling, so let's first only
introduce the register definitions in order to make patch reviewing a
little easier.
v2: Coding style (Jani).
v3: Preparation for upstreaming.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 149 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 149 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 1412abcb27d4..f62335c4a748 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -8783,6 +8783,12 @@ enum skl_power_gate {
#define PORT_CLK_SEL_NONE (7<<29)
#define PORT_CLK_SEL_MASK (7<<29)
+/* On ICL+ this is the same as PORT_CLK_SEL, but all bits change. */
+#define DDI_CLK_SEL(port) PORT_CLK_SEL(port)
+#define DDI_CLK_SEL_NONE (0x0 << 28)
+#define DDI_CLK_SEL_MG (0x8 << 28)
+#define DDI_CLK_SEL_MASK (0xF << 28)
+
/* Transcoder clock selection */
#define _TRANS_CLK_SEL_A 0x46140
#define _TRANS_CLK_SEL_B 0x46144
@@ -8913,6 +8919,7 @@ enum skl_power_gate {
* CNL Clocks
*/
#define DPCLKA_CFGCR0 _MMIO(0x6C200)
+#define DPCLKA_CFGCR0_ICL _MMIO(0x164280)
#define DPCLKA_CFGCR0_DDI_CLK_OFF(port) (1 << ((port) == PORT_F ? 23 : \
(port)+10))
#define DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port) ((port) == PORT_F ? 21 : \
@@ -8929,10 +8936,141 @@ enum skl_power_gate {
#define PLL_POWER_STATE (1 << 26)
#define CNL_DPLL_ENABLE(pll) _MMIO_PLL(pll, DPLL0_ENABLE, DPLL1_ENABLE)
+#define _MG_PLL1_ENABLE 0x46030
+#define _MG_PLL2_ENABLE 0x46034
+#define _MG_PLL3_ENABLE 0x46038
+#define _MG_PLL4_ENABLE 0x4603C
+/* Bits are the same as DPLL0_ENABLE */
+#define MG_PLL_ENABLE(port) _MMIO_PORT((port) - PORT_C, _MG_PLL1_ENABLE, \
+ _MG_PLL2_ENABLE)
+
+#define _MG_REFCLKIN_CTL_PORT1 0x16892C
+#define _MG_REFCLKIN_CTL_PORT2 0x16992C
+#define _MG_REFCLKIN_CTL_PORT3 0x16A92C
+#define _MG_REFCLKIN_CTL_PORT4 0x16B92C
+#define MG_REFCLKIN_CTL_OD_2_MUX(x) ((x) << 8)
+#define MG_REFCLKIN_CTL(port) _MMIO_PORT((port) - PORT_C, \
+ _MG_REFCLKIN_CTL_PORT1, \
+ _MG_REFCLKIN_CTL_PORT2)
+
+#define _MG_CLKTOP2_CORECLKCTL1_PORT1 0x1690D8
+#define _MG_CLKTOP2_CORECLKCTL1_PORT2 0x16B0D8
+#define _MG_CLKTOP2_CORECLKCTL1_PORT3 0x16D0D8
+#define _MG_CLKTOP2_CORECLKCTL1_PORT4 0x16F0D8
+#define MG_CLKTOP2_CORECLKCTL1_B_DIVRATIO(x) ((x) << 16)
+#define MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO(x) ((x) << 8)
+#define MG_CLKTOP2_CORECLKCTL1(port) _MMIO_PORT((port) - PORT_C, \
+ _MG_CLKTOP2_CORECLKCTL1_PORT1, \
+ _MG_CLKTOP2_CORECLKCTL1_PORT2)
+
+#define _MG_CLKTOP2_HSCLKCTL_PORT1 0x1688D4
+#define _MG_CLKTOP2_HSCLKCTL_PORT2 0x1698D4
+#define _MG_CLKTOP2_HSCLKCTL_PORT3 0x16A8D4
+#define _MG_CLKTOP2_HSCLKCTL_PORT4 0x16B8D4
+#define MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL(x) ((x) << 16)
+#define MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL(x) ((x) << 14)
+#define MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO(x) ((x) << 12)
+#define MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO(x) ((x) << 8)
+#define MG_CLKTOP2_HSCLKCTL(port) _MMIO_PORT((port) - PORT_C, \
+ _MG_CLKTOP2_HSCLKCTL_PORT1, \
+ _MG_CLKTOP2_HSCLKCTL_PORT2)
+
+#define _MG_PLL_DIV0_PORT1 0x168A00
+#define _MG_PLL_DIV0_PORT2 0x169A00
+#define _MG_PLL_DIV0_PORT3 0x16AA00
+#define _MG_PLL_DIV0_PORT4 0x16BA00
+#define MG_PLL_DIV0_FRACNEN_H (1 << 30)
+#define MG_PLL_DIV0_FBDIV_FRAC(x) ((x) << 8)
+#define MG_PLL_DIV0_FBDIV_INT(x) ((x) << 0)
+#define MG_PLL_DIV0(port) _MMIO_PORT((port) - PORT_C, _MG_PLL_DIV0_PORT1, \
+ _MG_PLL_DIV0_PORT2)
+
+#define _MG_PLL_DIV1_PORT1 0x168A04
+#define _MG_PLL_DIV1_PORT2 0x169A04
+#define _MG_PLL_DIV1_PORT3 0x16AA04
+#define _MG_PLL_DIV1_PORT4 0x16BA04
+#define MG_PLL_DIV1_IREF_NDIVRATIO(x) ((x) << 16)
+#define MG_PLL_DIV1_DITHER_DIV_1 (0 << 12)
+#define MG_PLL_DIV1_DITHER_DIV_2 (1 << 12)
+#define MG_PLL_DIV1_DITHER_DIV_4 (2 << 12)
+#define MG_PLL_DIV1_DITHER_DIV_8 (3 << 12)
+#define MG_PLL_DIV1_NDIVRATIO(x) ((x) << 4)
+#define MG_PLL_DIV1_FBPREDIV(x) ((x) << 0)
+#define MG_PLL_DIV1(port) _MMIO_PORT((port) - PORT_C, _MG_PLL_DIV1_PORT1, \
+ _MG_PLL_DIV1_PORT2)
+
+#define _MG_PLL_LF_PORT1 0x168A08
+#define _MG_PLL_LF_PORT2 0x169A08
+#define _MG_PLL_LF_PORT3 0x16AA08
+#define _MG_PLL_LF_PORT4 0x16BA08
+#define MG_PLL_LF_TDCTARGETCNT(x) ((x) << 24)
+#define MG_PLL_LF_AFCCNTSEL_256 (0 << 20)
+#define MG_PLL_LF_AFCCNTSEL_512 (1 << 20)
+#define MG_PLL_LF_GAINCTRL(x) ((x) << 16)
+#define MG_PLL_LF_INT_COEFF(x) ((x) << 8)
+#define MG_PLL_LF_PROP_COEFF(x) ((x) << 0)
+#define MG_PLL_LF(port) _MMIO_PORT((port) - PORT_C, _MG_PLL_LF_PORT1, \
+ _MG_PLL_LF_PORT2)
+
+#define _MG_PLL_FRAC_LOCK_PORT1 0x168A0C
+#define _MG_PLL_FRAC_LOCK_PORT2 0x169A0C
+#define _MG_PLL_FRAC_LOCK_PORT3 0x16AA0C
+#define _MG_PLL_FRAC_LOCK_PORT4 0x16BA0C
+#define MG_PLL_FRAC_LOCK_TRUELOCK_CRIT_32 (1 << 18)
+#define MG_PLL_FRAC_LOCK_EARLYLOCK_CRIT_32 (1 << 16)
+#define MG_PLL_FRAC_LOCK_LOCKTHRESH(x) ((x) << 11)
+#define MG_PLL_FRAC_LOCK_DCODITHEREN (1 << 10)
+#define MG_PLL_FRAC_LOCK_FEEDFWRDCAL_EN (1 << 8)
+#define MG_PLL_FRAC_LOCK_FEEDFWRDGAIN(x) ((x) << 0)
+#define MG_PLL_FRAC_LOCK(port) _MMIO_PORT((port) - PORT_C, \
+ _MG_PLL_FRAC_LOCK_PORT1, \
+ _MG_PLL_FRAC_LOCK_PORT2)
+
+#define _MG_PLL_SSC_PORT1 0x168A10
+#define _MG_PLL_SSC_PORT2 0x169A10
+#define _MG_PLL_SSC_PORT3 0x16AA10
+#define _MG_PLL_SSC_PORT4 0x16BA10
+#define MG_PLL_SSC_EN (1 << 28)
+#define MG_PLL_SSC_TYPE(x) ((x) << 26)
+#define MG_PLL_SSC_STEPLENGTH(x) ((x) << 16)
+#define MG_PLL_SSC_STEPNUM(x) ((x) << 10)
+#define MG_PLL_SSC_FILEN (1 << 9)
+#define MG_PLL_SSC_STEPSIZE(x) ((x) << 0)
+#define MG_PLL_SSC(port) _MMIO_PORT((port) - PORT_C, _MG_PLL_SSC_PORT1, \
+ _MG_PLL_SSC_PORT2)
+
+#define _MG_PLL_BIAS_PORT1 0x168A14
+#define _MG_PLL_BIAS_PORT2 0x169A14
+#define _MG_PLL_BIAS_PORT3 0x16AA14
+#define _MG_PLL_BIAS_PORT4 0x16BA14
+#define MG_PLL_BIAS_BIAS_GB_SEL(x) ((x) << 30)
+#define MG_PLL_BIAS_INIT_DCOAMP(x) ((x) << 24)
+#define MG_PLL_BIAS_BIAS_BONUS(x) ((x) << 16)
+#define MG_PLL_BIAS_BIASCAL_EN (1 << 15)
+#define MG_PLL_BIAS_CTRIM(x) ((x) << 8)
+#define MG_PLL_BIAS_VREF_RDAC(x) ((x) << 5)
+#define MG_PLL_BIAS_IREFTRIM(x) ((x) << 0)
+#define MG_PLL_BIAS(port) _MMIO_PORT((port) - PORT_C, _MG_PLL_BIAS_PORT1, \
+ _MG_PLL_BIAS_PORT2)
+
+#define _MG_PLL_TDC_COLDST_BIAS_PORT1 0x168A18
+#define _MG_PLL_TDC_COLDST_BIAS_PORT2 0x169A18
+#define _MG_PLL_TDC_COLDST_BIAS_PORT3 0x16AA18
+#define _MG_PLL_TDC_COLDST_BIAS_PORT4 0x16BA18
+#define MG_PLL_TDC_COLDST_IREFINT_EN (1 << 27)
+#define MG_PLL_TDC_COLDST_REFBIAS_START_PULSE_W(x) ((x) << 17)
+#define MG_PLL_TDC_COLDST_COLDSTART (1 << 16)
+#define MG_PLL_TDC_TDCCOVCCORR_EN (1 << 2)
+#define MG_PLL_TDC_TDCSEL(x) ((x) << 0)
+#define MG_PLL_TDC_COLDST_BIAS(port) _MMIO_PORT((port) - PORT_C, \
+ _MG_PLL_TDC_COLDST_BIAS_PORT1, \
+ _MG_PLL_TDC_COLDST_BIAS_PORT2)
+
#define _CNL_DPLL0_CFGCR0 0x6C000
#define _CNL_DPLL1_CFGCR0 0x6C080
#define DPLL_CFGCR0_HDMI_MODE (1 << 30)
#define DPLL_CFGCR0_SSC_ENABLE (1 << 29)
+#define DPLL_CFGCR0_SSC_ENABLE_ICL (1 << 25)
#define DPLL_CFGCR0_LINK_RATE_MASK (0xf << 25)
#define DPLL_CFGCR0_LINK_RATE_2700 (0 << 25)
#define DPLL_CFGCR0_LINK_RATE_1350 (1 << 25)
@@ -8966,8 +9104,19 @@ enum skl_power_gate {
#define DPLL_CFGCR1_PDIV_5 (4 << 2)
#define DPLL_CFGCR1_PDIV_7 (8 << 2)
#define DPLL_CFGCR1_CENTRAL_FREQ (3 << 0)
+#define DPLL_CFGCR1_CENTRAL_FREQ_8400 (3 << 0)
#define CNL_DPLL_CFGCR1(pll) _MMIO_PLL(pll, _CNL_DPLL0_CFGCR1, _CNL_DPLL1_CFGCR1)
+#define _ICL_DPLL0_CFGCR0 0x164000
+#define _ICL_DPLL1_CFGCR0 0x164080
+#define ICL_DPLL_CFGCR0(pll) _MMIO_PLL(pll, _ICL_DPLL0_CFGCR0, \
+ _ICL_DPLL1_CFGCR0)
+
+#define _ICL_DPLL0_CFGCR1 0x164004
+#define _ICL_DPLL1_CFGCR1 0x164084
+#define ICL_DPLL_CFGCR1(pll) _MMIO_PLL(pll, _ICL_DPLL0_CFGCR1, \
+ _ICL_DPLL1_CFGCR1)
+
/* BXT display engine PLL */
#define BXT_DE_PLL_CTL _MMIO(0x6d000)
#define BXT_DE_PLL_RATIO(x) (x) /* {60,65,100} * 19.2MHz */
--
2.14.3
More information about the Intel-gfx
mailing list