[Intel-gfx] [PATCH 09/17] drm/i915/icl: Add register defs for voltage swing sequences for MG PHY DDI
Paulo Zanoni
paulo.r.zanoni at intel.com
Thu Feb 22 03:55:11 UTC 2018
From: Manasi Navare <manasi.d.navare at intel.com>
On Icelake platform, MG PHY is used when operating in DP alternate
mode or the legacy HDMI or DP modes. DDI Ports C, D, E, F are MG PHY
DDI ports on ICL.
This patch adds the necessary voltage swing programming related
register definitions and macros for MG PHY DDI ports.
v4 (from Paulo):
* Use _PORT instead of _PICK
* Change some mask names to our current coding standards
* Stay under 80 columns
v3:
* Rebase on new revision of patches
v2:
* Remove whitespaces in the #defines (Paulo)
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Cc: Jani Nikula <jani.nikula at linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 116 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 116 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index b45a9435ebff..a389d4030b7f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2128,6 +2128,122 @@ enum i915_power_well_id {
#define N_SCALAR(x) ((x) << 24)
#define N_SCALAR_MASK (0x7F << 24)
+#define _ICL_MG_PHY_PORT_LN(port, ln, ln0p1, ln0p2, ln1p1) \
+ _MMIO(_PORT((port) - PORT_C, ln0p1, ln0p2) + (ln) * ((ln1p1) - (ln0p1)))
+
+#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT1 0x16812C
+#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT1 0x16852C
+#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT2 0x16912C
+#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT2 0x16952C
+#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT3 0x16A12C
+#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT3 0x16A52C
+#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT4 0x16B12C
+#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT4 0x16B52C
+#define ICL_PORT_MG_TX1_LINK_PARAMS(port, ln) \
+ _ICL_MG_PHY_PORT_LN(port, ln, _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT1, \
+ _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT2, \
+ _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT1)
+
+#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT1 0x1680AC
+#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT1 0x1684AC
+#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT2 0x1690AC
+#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT2 0x1694AC
+#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT3 0x16A0AC
+#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT3 0x16A4AC
+#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT4 0x16B0AC
+#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT4 0x16B4AC
+#define ICL_PORT_MG_TX2_LINK_PARAMS(port, ln) \
+ _ICL_MG_PHY_PORT_LN(port, ln, _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT1, \
+ _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT2, \
+ _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT1)
+#define CRI_USE_FS32 (1 << 5)
+
+#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT1 0x16814C
+#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT1 0x16854C
+#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT2 0x16914C
+#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT2 0x16954C
+#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT3 0x16A14C
+#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT3 0x16A54C
+#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT4 0x16B14C
+#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT4 0x16B54C
+#define ICL_PORT_MG_TX1_PISO_READLOAD(port, ln) \
+ _ICL_MG_PHY_PORT_LN(port, ln, _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT1, \
+ _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT2, \
+ _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT1)
+
+#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT1 0x1680CC
+#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT1 0x1684CC
+#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT2 0x1690CC
+#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT2 0x1694CC
+#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT3 0x16A0CC
+#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT3 0x16A4CC
+#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT4 0x16B0CC
+#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT4 0x16B4CC
+#define ICL_PORT_MG_TX2_PISO_READLOAD(port, ln) \
+ _ICL_MG_PHY_PORT_LN(port, ln, _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT1, \
+ _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT2, \
+ _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT1)
+#define CRI_CALCINIT (1 << 1)
+
+#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT1 0x168148
+#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT1 0x168548
+#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT2 0x169148
+#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT2 0x169548
+#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT3 0x16A148
+#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT3 0x16A548
+#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT4 0x16B148
+#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT4 0x16B548
+#define ICL_PORT_MG_TX1_SWINGCTRL(port, ln) \
+ _ICL_MG_PHY_PORT_LN(port, ln, _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT1, \
+ _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT2, \
+ _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT1)
+
+#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT1 0x1680C8
+#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT1 0x1684C8
+#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT2 0x1690C8
+#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT2 0x1694C8
+#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT3 0x16A0C8
+#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT3 0x16A4C8
+#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT4 0x16B0C8
+#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT4 0x16B4C8
+#define ICL_PORT_MG_TX2_SWINGCTRL(port, ln) \
+ _ICL_MG_PHY_PORT_LN(port, ln, _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT1, \
+ _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT2, \
+ _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT1)
+#define CRI_TXDEEMPH_OVERRIDE_17_12(x) ((x) << 0)
+#define CRI_TXDEEMPH_OVERRIDE_17_12_MASK (0x3F << 0)
+
+#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT1 0x168144
+#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT1 0x168544
+#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT2 0x169144
+#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT2 0x169544
+#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT3 0x16A144
+#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT3 0x16A544
+#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT4 0x16B144
+#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT4 0x16B544
+#define ICL_PORT_MG_TX1_DRVCTRL(port, ln) \
+ _ICL_MG_PHY_PORT_LN(port, ln, _ICL_MG_TX_DRVCTRL_TX1LN0_PORT1, \
+ _ICL_MG_TX_DRVCTRL_TX1LN0_PORT2, \
+ _ICL_MG_TX_DRVCTRL_TX1LN1_PORT1)
+
+#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT1 0x1680C4
+#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT1 0x1684C4
+#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT2 0x1690C4
+#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT2 0x1694C4
+#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT3 0x16A0C4
+#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT3 0x16A4C4
+#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT4 0x16B0C4
+#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT4 0x16B4C4
+#define ICL_PORT_MG_TX2_DRVCTRL(port, ln) \
+ _ICL_MG_PHY_PORT_LN(port, ln, _ICL_MG_TX_DRVCTRL_TX2LN0_PORT1, \
+ _ICL_MG_TX_DRVCTRL_TX2LN0_PORT2, \
+ _ICL_MG_TX_DRVCTRL_TX2LN1_PORT1)
+#define CRI_TXDEEMPH_OVERRIDE_11_6(x) ((x) << 24)
+#define CRI_TXDEEMPH_OVERRIDE_11_6_MASK (0x3F << 24)
+#define CRI_TXDEEMPH_OVERRIDE_EN (1 << 22)
+#define CRI_TXDEEMPH_OVERRIDE_5_0(x) ((x) << 16)
+#define CRI_TXDEEMPH_OVERRIDE_5_0_MASK (0x3F << 16)
+
/* The spec defines this only for BXT PHY0, but lets assume that this
* would exist for PHY1 too if it had a second channel.
*/
--
2.14.3
More information about the Intel-gfx
mailing list