[Intel-gfx] [PATCH v4] drm/i915/psr: New power domain for AUX IO.
Dhinakaran Pandiyan
dhinakaran.pandiyan at intel.com
Thu Feb 22 23:54:19 UTC 2018
PSR on CNL requires AUX IO wells to be kept on and the existing AUX domain
for AUX-A enables DC_OFF well too. This is not required, so add a new
AUX_IO_A domain for AUX-A to allow DC states to remain enabled. Other AUX
channels re-use the existing AUX domains.
v4: Reword comment (Rodrigo and Ville)
Rename _get and _put functions to include aux_io substring(Rodrigo)
Remove unnecessary diff that got included.
v3: Extract aux domain selection into a function (Ville)
v2: Add AUX IO domain only for AUX-A
Rebased on top of Ville's AUX series.
Cc: Imre Deak <imre.deak at intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Suggested-by: Imre Deak <imre.deak at intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
---
drivers/gpu/drm/i915/intel_display.h | 1 +
drivers/gpu/drm/i915/intel_psr.c | 41 +++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_runtime_pm.c | 3 +++
3 files changed, 45 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_display.h b/drivers/gpu/drm/i915/intel_display.h
index f5733a2576e7..4e7418b345bc 100644
--- a/drivers/gpu/drm/i915/intel_display.h
+++ b/drivers/gpu/drm/i915/intel_display.h
@@ -186,6 +186,7 @@ enum intel_display_power_domain {
POWER_DOMAIN_AUX_C,
POWER_DOMAIN_AUX_D,
POWER_DOMAIN_AUX_F,
+ POWER_DOMAIN_AUX_IO_A,
POWER_DOMAIN_GMBUS,
POWER_DOMAIN_MODESET,
POWER_DOMAIN_GT_IRQ,
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index 2ef374f936b9..04430d4c99c9 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -56,6 +56,43 @@
#include "intel_drv.h"
#include "i915_drv.h"
+static inline enum intel_display_power_domain
+psr_aux_domain(struct intel_dp *intel_dp)
+{
+ /* CNL HW requires corresponding AUX IOs to be powered up for PSR.
+ * However, for non-A AUX ports the corresponding non-EDP transcoders
+ * would have already enabled power well 2 and DC_OFF. This means we can
+ * acquire a wider POWER_DOMAIN_AUX_{B,C,D,F} reference instead of a
+ * specific AUX_IO reference without powering up any extra wells.
+ * Note that PSR is enabled only on Port A even though this function
+ * returns the correct domain for other ports too.
+ */
+ return intel_dp->aux_ch == AUX_CH_A ? POWER_DOMAIN_AUX_IO_A :
+ intel_dp->aux_power_domain;
+}
+
+static void psr_aux_io_power_get(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
+
+ if (INTEL_GEN(dev_priv) < 10)
+ return;
+
+ intel_display_power_get(dev_priv, psr_aux_domain(intel_dp));
+}
+
+static void psr_aux_io_power_put(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
+
+ if (INTEL_GEN(dev_priv) < 10)
+ return;
+
+ intel_display_power_put(dev_priv, psr_aux_domain(intel_dp));
+}
+
static bool vlv_is_psr_active_on_pipe(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = to_i915(dev);
@@ -459,6 +496,8 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp,
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
u32 chicken;
+ psr_aux_io_power_get(intel_dp);
+
if (dev_priv->psr.psr2_support) {
chicken = PSR2_VSC_ENABLE_PROG_HEADER;
if (dev_priv->psr.y_cord_support)
@@ -617,6 +656,8 @@ static void hsw_psr_disable(struct intel_dp *intel_dp,
else
WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
}
+
+ psr_aux_io_power_put(intel_dp);
}
/**
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index b7924feb9f27..53ea564f971e 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -130,6 +130,8 @@ intel_display_power_domain_str(enum intel_display_power_domain domain)
return "AUX_D";
case POWER_DOMAIN_AUX_F:
return "AUX_F";
+ case POWER_DOMAIN_AUX_IO_A:
+ return "AUX_IO_A";
case POWER_DOMAIN_GMBUS:
return "GMBUS";
case POWER_DOMAIN_INIT:
@@ -1853,6 +1855,7 @@ void intel_display_power_put(struct drm_i915_private *dev_priv,
BIT_ULL(POWER_DOMAIN_INIT))
#define CNL_DISPLAY_AUX_A_POWER_DOMAINS ( \
BIT_ULL(POWER_DOMAIN_AUX_A) | \
+ BIT_ULL(POWER_DOMAIN_AUX_IO_A) | \
BIT_ULL(POWER_DOMAIN_INIT))
#define CNL_DISPLAY_AUX_B_POWER_DOMAINS ( \
BIT_ULL(POWER_DOMAIN_AUX_B) | \
--
2.14.1
More information about the Intel-gfx
mailing list