[Intel-gfx] [PATCH] drm/i915/skl+: Add and enable DP AUX CH mutex
Souza, Jose
jose.souza at intel.com
Wed Feb 28 00:57:07 UTC 2018
On Tue, 2018-02-27 at 23:34 +0200, Ville Syrjälä wrote:
> On Tue, Feb 27, 2018 at 01:23:59PM -0800, José Roberto de Souza
> wrote:
> > When PSR/PSR2/GTC is enabled hardware can do AUX transactions by it
> > self, so lets use the mutex register that is available in gen9+ to
> > avoid concurrent access by hardware and driver.
> > Older gen handling will be done separated.
> >
> > Reference: https://01.org/sites/default/files/documentation/intel-g
> > fx-prm-osrc-skl-vol12-display.pdf
> > Page 198 - AUX programming sequence
> >
> > Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> > Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> > Cc: Jani Nikula <jani.nikula at linux.intel.com>
> > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
> > ---
> >
> > Changelog:
> > v2
> > - removed the PSR dependency, now getting lock all the times when
> > available
> > - renamed functions to avoid nested calls
> > - moved register bits right after the DP_AUX_CH_MUTEX()
> > - removed 'drm/i915: keep AUX powered while PSR is enabled'
> > Dhinakaran Pandiyan will sent a better and final version
> > v3
> > - rebased on top of Ville's AUX series
> > - moved port registers to above DP_AUX_CH_MUTEX()
> > - using intel_wait_for_register() instead of the internal version
> > v4
> > - removed virtual function to get mutex register address
> > - enabling the mutex back only on aux channel init
> > - added the aux channel name to the timeout debug message
> > v5
> > - renamed DP_AUX_CH_MUTEX() parameter to aux_ch
> > - renamed goto label when intel_dp_aux_ch_trylock() fails
> >
> > drivers/gpu/drm/i915/i915_reg.h | 9 ++++++++
> > drivers/gpu/drm/i915/intel_dp.c | 47
> > +++++++++++++++++++++++++++++++++++++++++
> > 2 files changed, 56 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h
> > index eea5b2c537d4..bce2e6dad4c4 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -5385,6 +5385,15 @@ enum {
> > #define DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(c) (((c) - 1) << 5)
> > #define DP_AUX_CH_CTL_SYNC_PULSE_SKL(c) ((c) - 1)
> >
> > +#define _DPA_AUX_CH_MUTEX (dev_priv-
> > >info.display_mmio_offset + 0x6402C)
> > +#define _DPB_AUX_CH_MUTEX (dev_priv-
> > >info.display_mmio_offset + 0x6412C)
> > +#define _DPC_AUX_CH_MUTEX (dev_priv-
> > >info.display_mmio_offset + 0x6422C)
> > +#define _DPD_AUX_CH_MUTEX (dev_priv-
> > >info.display_mmio_offset + 0x6432C)
> > +#define _DPF_AUX_CH_MUTEX (dev_priv-
> > >info.display_mmio_offset + 0x6452C)
> > +#define DP_AUX_CH_MUTEX(aux_ch) _MMIO_PORT(aux_ch,
> > _DPA_AUX_CH_MUTEX, _DPB_AUX_CH_MUTEX)
> > +#define DP_AUX_CH_MUTEX_ENABLE (1 << 31)
> > +#define DP_AUX_CH_MUTEX_STATUS (1 << 30)
> > +
> > /*
> > * Computing GMCH M and N values for the Display Port link
> > *
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c
> > b/drivers/gpu/drm/i915/intel_dp.c
> > index 2a3b3ae4e3da..7f4bf77227cd 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -1081,6 +1081,42 @@ static uint32_t
> > intel_dp_get_aux_send_ctl(struct intel_dp *intel_dp,
> > aux_clock_divider)
> > ;
> > }
> >
> > +static bool intel_dp_aux_ch_trylock(struct intel_dp *intel_dp)
> > +{
> > + struct intel_digital_port *intel_dig_port =
> > dp_to_dig_port(intel_dp);
> > + struct drm_i915_private *dev_priv =
> > + to_i915(intel_dig_port->base.base.dev);
> > +
> > + if (INTEL_GEN(dev_priv) < 9)
> > + return true;
> > +
> > + /* Spec says that mutex is acquired when status bit is
> > read as unset,
> > + * here waiting for 2msec(+-4 aux transactions) before
> > give up.
> > + */
> > + if (intel_wait_for_register(dev_priv,
> > DP_AUX_CH_MUTEX(intel_dp->aux_ch),
> > + DP_AUX_CH_MUTEX_STATUS, 0, 2))
> > {
> > + DRM_DEBUG_KMS("aux channel %c locked for 2msec,
> > timing out\n",
> > + aux_ch_name(intel_dp->aux_ch));
> > + return false;
> > + }
> > +
> > + return true;
> > +}
> > +
> > +static void intel_dp_aux_ch_unlock(struct intel_dp *intel_dp)
> > +{
> > + struct intel_digital_port *intel_dig_port =
> > dp_to_dig_port(intel_dp);
> > + struct drm_i915_private *dev_priv =
> > + to_i915(intel_dig_port->base.base.dev);
> > +
> > + if (INTEL_GEN(dev_priv) < 9)
> > + return;
> > +
> > + /* set the status bit releases the mutex + keeping mutex
> > enabled */
> > + I915_WRITE(DP_AUX_CH_MUTEX(intel_dp->aux_ch),
> > + DP_AUX_CH_MUTEX_ENABLE |
> > DP_AUX_CH_MUTEX_STATUS);
> > +}
> > +
> > static int
> > intel_dp_aux_ch(struct intel_dp *intel_dp,
> > const uint8_t *send, int send_bytes,
> > @@ -1119,6 +1155,11 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
> >
> > intel_dp_check_edp(intel_dp);
> >
> > + if (!intel_dp_aux_ch_trylock(intel_dp)) {
> > + ret = -EBUSY;
> > + goto out_aux_ch_unlocked;
> > + }
> > +
> > /* Try to wait for any previous AUX channel activity */
> > for (try = 0; try < 3; try++) {
> > status = I915_READ_NOTRACE(ch_ctl);
> > @@ -1240,6 +1281,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
> >
> > ret = recv_bytes;
> > out:
> > + intel_dp_aux_ch_unlock(intel_dp);
> > +out_aux_ch_unlocked:
> > pm_qos_update_request(&dev_priv->pm_qos,
> > PM_QOS_DEFAULT_VALUE);
> >
> > if (vdd)
> > @@ -1536,6 +1579,10 @@ intel_dp_aux_init(struct intel_dp *intel_dp)
> > else
> > intel_dp->get_aux_send_ctl = g4x_get_aux_send_ctl;
> >
> > + if (INTEL_GEN(dev_priv) >= 9)
> > + I915_WRITE(DP_AUX_CH_MUTEX(intel_dp->aux_ch),
> > + DP_AUX_CH_MUTEX_ENABLE);
>
> And who enables it after system/runtime PM etc.? Not sure how much
> sense
> there is to finesse this anyway. One extra mmio write every time we
> try
> to acquire the mutex shouldn't kill anyone.
Valid point, but I guess is better enable the mutex in
intel_dp_encoder_reset():
"
@@ -5293,6 +5340,10 @@ void intel_dp_encoder_reset(struct drm_encoder
*encoder)
pps_lock(intel_dp);
+ if (INTEL_GEN(dev_priv) >= 9)
+ I915_WRITE(DP_AUX_CH_MUTEX(intel_dp->aux_ch),
+ DP_AUX_CH_MUTEX_ENABLE);
+
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
intel_dp->active_pipe = vlv_active_pipe(intel_dp);
"
any objections?
>
> > +
> > drm_dp_aux_init(&intel_dp->aux);
> >
> > /* Failure to allocate our preferred name is not critical
> > */
> > --
> > 2.16.2
>
>
More information about the Intel-gfx
mailing list