[Intel-gfx] [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
Thierry Reding
thierry.reding at gmail.com
Wed Feb 28 19:44:30 UTC 2018
On Thu, Feb 22, 2018 at 02:01:16PM +0200, Claudiu Beznea wrote:
> Add PWM mode to pwm_config() function. The drivers which uses pwm_config()
> were adapted to this change.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
> ---
> arch/arm/mach-s3c24xx/mach-rx1950.c | 11 +++++++++--
> drivers/bus/ts-nbus.c | 2 +-
> drivers/clk/clk-pwm.c | 3 ++-
> drivers/gpu/drm/i915/intel_panel.c | 17 ++++++++++++++---
> drivers/hwmon/pwm-fan.c | 2 +-
> drivers/input/misc/max77693-haptic.c | 2 +-
> drivers/input/misc/max8997_haptic.c | 6 +++++-
> drivers/leds/leds-pwm.c | 5 ++++-
> drivers/media/rc/ir-rx51.c | 5 ++++-
> drivers/media/rc/pwm-ir-tx.c | 5 ++++-
> drivers/video/backlight/lm3630a_bl.c | 4 +++-
> drivers/video/backlight/lp855x_bl.c | 4 +++-
> drivers/video/backlight/lp8788_bl.c | 5 ++++-
> drivers/video/backlight/pwm_bl.c | 11 +++++++++--
> drivers/video/fbdev/ssd1307fb.c | 3 ++-
> include/linux/pwm.h | 6 ++++--
> 16 files changed, 70 insertions(+), 21 deletions(-)
I don't think it makes sense to leak mode support into the legacy API.
The pwm_config() function is considered legacy and should eventually go
away. As such it doesn't make sense to integrate a new feature such as
PWM modes into it. All users of pwm_config() assume normal mode, and
that's what pwm_config() should provide.
Anyone that needs something other than normal mode should use the new
atomic PWM API.
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/intel-gfx/attachments/20180228/ee4ccbc7/attachment-0001.sig>
More information about the Intel-gfx
mailing list