[Intel-gfx] [PATCH 03/17] drm/i915/icl: compute the combo PHY (DPLL) HDMI registers

James Ausmus james.ausmus at intel.com
Wed Feb 28 19:59:28 UTC 2018


On Thu, Feb 22, 2018 at 12:55:05AM -0300, Paulo Zanoni wrote:
> HDMI mode DPLL programming on ICL is the same as CNL, so just reuse
> the CNL code.
> 
> v2:
>  - Properly detect HDMI crtcs.
>  - Rebase after changes to the cnl function (clock * 1000).
> 
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_dpll_mgr.c | 34 +++++++++++++++++++++++++++++++---
>  1 file changed, 31 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> index 8520a1b0279f..4d9265d14661 100644
> --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> @@ -2203,6 +2203,7 @@ cnl_ddi_calculate_wrpll(int clock,
>  			struct skl_wrpll_params *wrpll_params)
>  {
>  	u32 afe_clock = clock * 5;
> +	uint32_t ref_clock;
>  	u32 dco_min = 7998000;
>  	u32 dco_max = 10000000;
>  	u32 dco_mid = (dco_min + dco_max) / 2;
> @@ -2235,8 +2236,12 @@ cnl_ddi_calculate_wrpll(int clock,
>  
>  	cnl_wrpll_get_multipliers(best_div, &pdiv, &qdiv, &kdiv);
>  
> -	cnl_wrpll_params_populate(wrpll_params, best_dco,
> -				  dev_priv->cdclk.hw.ref, pdiv, qdiv, kdiv);
> +	ref_clock = dev_priv->cdclk.hw.ref;
> +	if (IS_ICELAKE(dev_priv) && ref_clock == 38400)

This could use a comment - something like

/* 
 * ICL BSpec states "If reference frequency is 38.4, use 19.2 because
 * the DPLL automatically divides that by 2."
 */


With that -

Reviewed-by: James Ausmus <james.ausmus at intel.com>

> +		ref_clock = 19200;
> +
> +	cnl_wrpll_params_populate(wrpll_params, best_dco, ref_clock, pdiv, qdiv,
> +				  kdiv);
>  
>  	return true;
>  }
> @@ -2388,7 +2393,30 @@ static bool icl_calc_dpll_state(struct intel_crtc_state *crtc_state,
>  				struct intel_encoder *encoder, int clock,
>  				struct intel_dpll_hw_state *pll_state)
>  {
> -	/* TODO */
> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +	uint32_t cfgcr0, cfgcr1;
> +	struct skl_wrpll_params pll_params = { 0 };
> +	bool ret;
> +
> +	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
> +		ret = cnl_ddi_calculate_wrpll(clock, dev_priv, &pll_params);
> +	else
> +		ret = false; /* TODO */
> +
> +	if (!ret)
> +		return false;
> +
> +	cfgcr0 = DPLL_CFGCR0_DCO_FRACTION(pll_params.dco_fraction) |
> +		 pll_params.dco_integer;
> +
> +	cfgcr1 = DPLL_CFGCR1_QDIV_RATIO(pll_params.qdiv_ratio) |
> +		 DPLL_CFGCR1_QDIV_MODE(pll_params.qdiv_mode) |
> +		 DPLL_CFGCR1_KDIV(pll_params.kdiv) |
> +		 DPLL_CFGCR1_PDIV(pll_params.pdiv) |
> +		 DPLL_CFGCR1_CENTRAL_FREQ_8400;
> +
> +	pll_state->cfgcr0 = cfgcr0;
> +	pll_state->cfgcr1 = cfgcr1;
>  	return true;
>  }
>  
> -- 
> 2.14.3
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx


More information about the Intel-gfx mailing list