[Intel-gfx] [PATCH 1/2] drm/i915: remove confusing GPIO vs PCH_GPIO
Daniel Vetter
daniel at ffwll.ch
Thu Jul 12 17:03:58 UTC 2018
On Thu, Jul 12, 2018 at 6:24 PM, Lucas De Marchi
<lucas.de.marchi at gmail.com> wrote:
> On Thu, Jul 12, 2018 at 05:04:03PM +0200, Daniel Vetter wrote:
>> On Mon, Jul 09, 2018 at 09:22:21AM -0700, Lucas De Marchi wrote:
>> > Instead of defining all registers twice, define just a PCH_GPIO_BASE
>> > that has the same address as PCH_GPIO_A and use that to calculate all
>> > the others. This also brings VLV and !HAS_GMCH_DISPLAY in line, doing
>> > the same thing.
>> >
>> > This also rewrites the GMBUS[05] registers since they depend on
>> > gpio_mmio_base.
>> >
>> > v2: Fix GMBUS registers to be relative to gpio base; create GPIO()
>> > macro to return a particular gpio address and move the enum out of
>> > i915_reg.h (suggested by Jani)
>> >
>> > Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
>> > ---
>> > drivers/gpu/drm/i915/gvt/handlers.c | 2 +-
>> > drivers/gpu/drm/i915/i915_reg.h | 53 +++++++++++++++--------------
>> > drivers/gpu/drm/i915/intel_drv.h | 16 +++++++++
>> > drivers/gpu/drm/i915/intel_i2c.c | 16 ++++-----
>> > 4 files changed, 52 insertions(+), 35 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c
>> > index e39492aaff6c..e25a74fe753b 100644
>> > --- a/drivers/gpu/drm/i915/gvt/handlers.c
>> > +++ b/drivers/gpu/drm/i915/gvt/handlers.c
>> > @@ -2084,7 +2084,7 @@ static int init_generic_mmio_info(struct intel_gvt *gvt)
>> >
>> > MMIO_F(PCH_GMBUS0, 4 * 4, 0, 0, 0, D_ALL, gmbus_mmio_read,
>> > gmbus_mmio_write);
>> > - MMIO_F(PCH_GPIOA, 6 * 4, F_UNALIGN, 0, 0, D_ALL, NULL, NULL);
>> > + MMIO_F(_MMIO(PCH_GPIO_BASE), 6 * 4, F_UNALIGN, 0, 0, D_ALL, NULL, NULL);
>> > MMIO_F(_MMIO(0xe4f00), 0x28, 0, 0, 0, D_ALL, NULL, NULL);
>> >
>> > MMIO_F(_MMIO(_PCH_DPB_AUX_CH_CTL), 6 * 4, 0, 0, 0, D_PRE_SKL, NULL,
>> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>> > index 0424e45f88db..f8f71d577613 100644
>> > --- a/drivers/gpu/drm/i915/i915_reg.h
>> > +++ b/drivers/gpu/drm/i915/i915_reg.h
>> > @@ -3088,18 +3088,11 @@ enum i915_power_well_id {
>> > /*
>> > * GPIO regs
>> > */
>> > -#define GPIOA _MMIO(0x5010)
>> > -#define GPIOB _MMIO(0x5014)
>> > -#define GPIOC _MMIO(0x5018)
>> > -#define GPIOD _MMIO(0x501c)
>> > -#define GPIOE _MMIO(0x5020)
>> > -#define GPIOF _MMIO(0x5024)
>> > -#define GPIOG _MMIO(0x5028)
>> > -#define GPIOH _MMIO(0x502c)
>> > -#define GPIOJ _MMIO(0x5034)
>> > -#define GPIOK _MMIO(0x5038)
>> > -#define GPIOL _MMIO(0x503C)
>> > -#define GPIOM _MMIO(0x5040)
>> > +#define GPIO_OFFSET 0x5010u
>> > +#define PCH_GPIO_BASE (0xc0000u + GPIO_OFFSET)
>> > +#define VLV_GPIO_BASE (VLV_DISPLAY_BASE + GPIO_OFFSET)
>>
>> This is a rather peculiar choice of baseline address. I'd either go with
>> 0x5000u or 0x0000u (which avoids the need to change all the gmbus macros).
>
> I'm all for a round 0x50000 number, however it doesn't match the spec.
> I don't understand how 0x0 would make sense here. Are you suggesting to
> embed the GPIO_OFFSET into the GPIO macro and get rid of the GPIO_BASE?
>
> #define GPIO_OFFSET 0x5010u
> /* THESE 2 BELOW COULD USE ANOTHER BETTER NAME */
> #define PCH_GPIO_BASE 0xc0000u
> #define VLV_GPIO_BASE VLV_DISPLAY_BASE
> #define GPIO(gpio) _MMIO(dev_priv->gpio_mmio_base + 0x5010 + 4 * (gpio))
Yeah that's what I had in mind.
> That would make sense, but I don't think it's a better option due to
> GPIO_BASE now and mmio_gpio_base matching nothing in the spec (and the
> extra add on every gpio).
>
>> Only needs a slight adjustment to your GPIO macro, but avoids the rather
>> onerous - GPIO_OFFSET + GMBUS_OFFSET you have below. That one kinda
>> indicates your offset is all confused.
>
> well.. this is only because there I'm actually interested in the vlv
> display / pch offset. The subtraction is done so I don't have to store
> a gmbus_mmio_base and can rather work it out from the gpio one.
If you want to stick with your approach, at least extract the common
->gpio_mmio_base - GPIO_OFFSET + GMBUS_OFFSET computation into a
GMBUS_BASE(dev) macro or something like that. I think that would be a
good solution too.
Either approach has my a-b (I'll be on vacations next 3 weeks to
probably no r-b from me).
-Daniel
>
> Lucas De Marchi
>
>>
>> Anyway, just a drive-by comment, I was looking for some other gmbus patch.
>> -Daniel
>>
>> > +#define GPIO(gpio) _MMIO(dev_priv->gpio_mmio_base + 4 * (gpio))
>> > +
>> > # define GPIO_CLOCK_DIR_MASK (1 << 0)
>> > # define GPIO_CLOCK_DIR_IN (0 << 1)
>> > # define GPIO_CLOCK_DIR_OUT (1 << 1)
>> > @@ -3115,7 +3108,11 @@ enum i915_power_well_id {
>> > # define GPIO_DATA_VAL_IN (1 << 12)
>> > # define GPIO_DATA_PULLUP_DISABLE (1 << 13)
>> >
>> > -#define GMBUS0 _MMIO(dev_priv->gpio_mmio_base + 0x5100) /* clock/port select */
>> > +#define GMBUS_OFFSET 0x5100u
>> > +
>> > +/* clock/port select */
>> > +#define GMBUS0 _MMIO(dev_priv->gpio_mmio_base - GPIO_OFFSET \
>> > + + GMBUS_OFFSET)
>> > #define GMBUS_AKSV_SELECT (1 << 11)
>> > #define GMBUS_RATE_100KHZ (0 << 8)
>> > #define GMBUS_RATE_50KHZ (1 << 8)
>> > @@ -3141,7 +3138,10 @@ enum i915_power_well_id {
>> > #define GMBUS_PIN_12_TC4_ICP 12
>> >
>> > #define GMBUS_NUM_PINS 13 /* including 0 */
>> > -#define GMBUS1 _MMIO(dev_priv->gpio_mmio_base + 0x5104) /* command/status */
>> > +
>> > +/* command/status */
>> > +#define GMBUS1 _MMIO(dev_priv->gpio_mmio_base - GPIO_OFFSET \
>> > + + GMBUS_OFFSET + 0x4)
>> > #define GMBUS_SW_CLR_INT (1 << 31)
>> > #define GMBUS_SW_RDY (1 << 30)
>> > #define GMBUS_ENT (1 << 29) /* enable timeout */
>> > @@ -3155,7 +3155,10 @@ enum i915_power_well_id {
>> > #define GMBUS_SLAVE_ADDR_SHIFT 1
>> > #define GMBUS_SLAVE_READ (1 << 0)
>> > #define GMBUS_SLAVE_WRITE (0 << 0)
>> > -#define GMBUS2 _MMIO(dev_priv->gpio_mmio_base + 0x5108) /* status */
>> > +
>> > +/* status */
>> > +#define GMBUS2 _MMIO(dev_priv->gpio_mmio_base - GPIO_OFFSET \
>> > + + GMBUS_OFFSET + 0x8)
>> > #define GMBUS_INUSE (1 << 15)
>> > #define GMBUS_HW_WAIT_PHASE (1 << 14)
>> > #define GMBUS_STALL_TIMEOUT (1 << 13)
>> > @@ -3163,14 +3166,21 @@ enum i915_power_well_id {
>> > #define GMBUS_HW_RDY (1 << 11)
>> > #define GMBUS_SATOER (1 << 10)
>> > #define GMBUS_ACTIVE (1 << 9)
>> > -#define GMBUS3 _MMIO(dev_priv->gpio_mmio_base + 0x510c) /* data buffer bytes 3-0 */
>> > -#define GMBUS4 _MMIO(dev_priv->gpio_mmio_base + 0x5110) /* interrupt mask (Pineview+) */
>> > +
>> > +/* data buffer bytes 3-0 */
>> > +#define GMBUS3 _MMIO(dev_priv->gpio_mmio_base - GPIO_OFFSET \
>> > + + GMBUS_OFFSET + 0xc)
>> > +/* interrupt mask (Pineview+) */
>> > +#define GMBUS4 _MMIO(dev_priv->gpio_mmio_base - GPIO_OFFSET \
>> > + + GMBUS_OFFSET + 0x10)
>> > #define GMBUS_SLAVE_TIMEOUT_EN (1 << 4)
>> > #define GMBUS_NAK_EN (1 << 3)
>> > #define GMBUS_IDLE_EN (1 << 2)
>> > #define GMBUS_HW_WAIT_EN (1 << 1)
>> > #define GMBUS_HW_RDY_EN (1 << 0)
>> > -#define GMBUS5 _MMIO(dev_priv->gpio_mmio_base + 0x5120) /* byte index */
>> > +/* byte index */
>> > +#define GMBUS5 _MMIO(dev_priv->gpio_mmio_base - GPIO_OFFSET \
>> > + + GMBUS_OFFSET + 0x20)
>> > #define GMBUS_2BYTE_INDEX_EN (1 << 31)
>> >
>> > /*
>> > @@ -7668,13 +7678,6 @@ enum {
>> > #define ICP_TC_HPD_LONG_DETECT(tc_port) (2 << (tc_port) * 4)
>> > #define ICP_TC_HPD_SHORT_DETECT(tc_port) (1 << (tc_port) * 4)
>> >
>> > -#define PCH_GPIOA _MMIO(0xc5010)
>> > -#define PCH_GPIOB _MMIO(0xc5014)
>> > -#define PCH_GPIOC _MMIO(0xc5018)
>> > -#define PCH_GPIOD _MMIO(0xc501c)
>> > -#define PCH_GPIOE _MMIO(0xc5020)
>> > -#define PCH_GPIOF _MMIO(0xc5024)
>> > -
>> > #define PCH_GMBUS0 _MMIO(0xc5100)
>> > #define PCH_GMBUS1 _MMIO(0xc5104)
>> > #define PCH_GMBUS2 _MMIO(0xc5108)
>> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>> > index 61e715ddd0d5..dedf87c58a95 100644
>> > --- a/drivers/gpu/drm/i915/intel_drv.h
>> > +++ b/drivers/gpu/drm/i915/intel_drv.h
>> > @@ -152,6 +152,22 @@
>> > * Display related stuff
>> > */
>> >
>> > +enum i915_gpio {
>> > + GPIOA = 0,
>> > + GPIOB,
>> > + GPIOC,
>> > + GPIOD,
>> > + GPIOE,
>> > + GPIOF,
>> > + GPIOG,
>> > + GPIOH,
>> > + __GPIOI_UNUSED,
>> > + GPIOJ,
>> > + GPIOK,
>> > + GPIOL,
>> > + GPIOM,
>> > +};
>> > +
>> > /* store information about an Ixxx DVO */
>> > /* The i830->i865 use multiple DVOs with multiple i2cs */
>> > /* the i915, i945 have a single sDVO i2c bus - which is different */
>> > diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
>> > index 97606c1be70d..f1c0b974daa6 100644
>> > --- a/drivers/gpu/drm/i915/intel_i2c.c
>> > +++ b/drivers/gpu/drm/i915/intel_i2c.c
>> > @@ -37,7 +37,7 @@
>> >
>> > struct gmbus_pin {
>> > const char *name;
>> > - i915_reg_t reg;
>> > + enum i915_gpio gpio;
>> > };
>> >
>> > /* Map gmbus pin pairs to names and registers. */
>> > @@ -121,8 +121,7 @@ bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv,
>> > else
>> > size = ARRAY_SIZE(gmbus_pins);
>> >
>> > - return pin < size &&
>> > - i915_mmio_reg_valid(get_gmbus_pin(dev_priv, pin)->reg);
>> > + return pin < size && get_gmbus_pin(dev_priv, pin)->name;
>> > }
>> >
>> > /* Intel GPIO access functions */
>> > @@ -292,8 +291,7 @@ intel_gpio_setup(struct intel_gmbus *bus, unsigned int pin)
>> >
>> > algo = &bus->bit_algo;
>> >
>> > - bus->gpio_reg = _MMIO(dev_priv->gpio_mmio_base +
>> > - i915_mmio_reg_offset(get_gmbus_pin(dev_priv, pin)->reg));
>> > + bus->gpio_reg = GPIO(get_gmbus_pin(dev_priv, pin)->gpio);
>> > bus->adapter.algo_data = algo;
>> > algo->setsda = set_data;
>> > algo->setscl = set_clock;
>> > @@ -775,11 +773,11 @@ int intel_setup_gmbus(struct drm_i915_private *dev_priv)
>> > return 0;
>> >
>> > if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
>> > - dev_priv->gpio_mmio_base = VLV_DISPLAY_BASE;
>> > + dev_priv->gpio_mmio_base = VLV_GPIO_BASE;
>> > else if (!HAS_GMCH_DISPLAY(dev_priv))
>> > - dev_priv->gpio_mmio_base =
>> > - i915_mmio_reg_offset(PCH_GPIOA) -
>> > - i915_mmio_reg_offset(GPIOA);
>> > + dev_priv->gpio_mmio_base = PCH_GPIO_BASE;
>> > + else
>> > + dev_priv->gpio_mmio_base = GPIO_OFFSET;
>> >
>> > mutex_init(&dev_priv->gmbus_mutex);
>> > init_waitqueue_head(&dev_priv->gmbus_wait_queue);
>> > --
>> > 2.17.1
>> >
>> > _______________________________________________
>> > Intel-gfx mailing list
>> > Intel-gfx at lists.freedesktop.org
>> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>>
>> --
>> Daniel Vetter
>> Software Engineer, Intel Corporation
>> http://blog.ffwll.ch
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the Intel-gfx
mailing list