[Intel-gfx] [PATCH v3 1/2] drm/i915: remove confusing GPIO vs PCH_GPIO
Lucas De Marchi
lucas.de.marchi at gmail.com
Tue Jul 17 22:16:53 UTC 2018
On Fri, Jul 13, 2018 at 9:10 AM Ville Syrjälä
<ville.syrjala at linux.intel.com> wrote:
>
> On Fri, Jul 13, 2018 at 08:42:11AM -0700, Lucas De Marchi wrote:
> > Instead of defining all registers twice, define just a PCH_GPIO_BASE
> > that has the same address as PCH_GPIO_A and use that to calculate all
> > the others. This also brings VLV and !HAS_GMCH_DISPLAY in line, doing
> > the same thing.
> >
> > v2: Fix GMBUS registers to be relative to gpio base; create GPIO()
> > macro to return a particular gpio address and move the enum out of
> > i915_reg.h (suggested by Jani)
> >
> > v3: Move base offset inside the GPIO() macro so the GMBUS defines don't
> > actually need to be changed (suggested by Daniel/Ville)
> >
> > Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
> > ---
> > drivers/gpu/drm/i915/gvt/handlers.c | 2 +-
> > drivers/gpu/drm/i915/i915_drv.h | 3 ++-
> > drivers/gpu/drm/i915/i915_reg.h | 24 +++++-------------------
> > drivers/gpu/drm/i915/intel_drv.h | 16 ++++++++++++++++
> > drivers/gpu/drm/i915/intel_i2c.c | 12 ++++--------
> > 5 files changed, 28 insertions(+), 29 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c
> > index 7a58ca555197..ecff866bbbf1 100644
> > --- a/drivers/gpu/drm/i915/gvt/handlers.c
> > +++ b/drivers/gpu/drm/i915/gvt/handlers.c
> > @@ -2118,7 +2118,7 @@ static int init_generic_mmio_info(struct intel_gvt *gvt)
> >
> > MMIO_F(PCH_GMBUS0, 4 * 4, 0, 0, 0, D_ALL, gmbus_mmio_read,
> > gmbus_mmio_write);
> > - MMIO_F(PCH_GPIOA, 6 * 4, F_UNALIGN, 0, 0, D_ALL, NULL, NULL);
> > + MMIO_F(GPIO(GPIOA), 6 * 4, F_UNALIGN, 0, 0, D_ALL, NULL, NULL);
>
> I have no idea of gpio_mmio_base is populated correctly at this point
> for gvt, and I'm too lazy to find out.
humn, unfortunately it is not
i915_driver_load() -> i915_load_modeset_init() -> intel_setup_gmbus()
-> dev_priv->gpio_mmio_base = ...
i915_driver_load() -> i915_driver_init_hw() -> intel_gvt_init() ->
intel_gvt_init_device() -> intel_gvt_setup_mmio_info() ->
init_generic_mmio_info()
Is adding a single PCH_GPIO_BASE that doesn't depend on dev_priv being
populated for use on gvt an option?
Lucas De Marchi
>
> > MMIO_F(_MMIO(0xe4f00), 0x28, 0, 0, 0, D_ALL, NULL, NULL);
> >
> > MMIO_F(_MMIO(_PCH_DPB_AUX_CH_CTL), 6 * 4, 0, 0, 0, D_PRE_SKL, NULL,
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > index b31d48cf7a69..596e734a874f 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -1611,7 +1611,8 @@ struct drm_i915_private {
> > struct mutex gmbus_mutex;
> >
> > /**
> > - * Base address of the gmbus and gpio block.
> > + * Base address of where the gmbus and gpio blocks are located (either
> > + * on PCH or on SoC for platforms without PCH).
> > */
> > uint32_t gpio_mmio_base;
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index 1f222af0324d..5e3ba9898f4e 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -3089,18 +3089,9 @@ enum i915_power_well_id {
> > /*
> > * GPIO regs
> > */
> > -#define GPIOA _MMIO(0x5010)
> > -#define GPIOB _MMIO(0x5014)
> > -#define GPIOC _MMIO(0x5018)
> > -#define GPIOD _MMIO(0x501c)
> > -#define GPIOE _MMIO(0x5020)
> > -#define GPIOF _MMIO(0x5024)
> > -#define GPIOG _MMIO(0x5028)
> > -#define GPIOH _MMIO(0x502c)
> > -#define GPIOJ _MMIO(0x5034)
> > -#define GPIOK _MMIO(0x5038)
> > -#define GPIOL _MMIO(0x503C)
> > -#define GPIOM _MMIO(0x5040)
> > +#define GPIO(gpio) _MMIO(dev_priv->gpio_mmio_base + 0x5010 + \
> > + 4 * (gpio))
> > +
> > # define GPIO_CLOCK_DIR_MASK (1 << 0)
> > # define GPIO_CLOCK_DIR_IN (0 << 1)
> > # define GPIO_CLOCK_DIR_OUT (1 << 1)
> > @@ -7483,6 +7474,8 @@ enum {
> >
> > /* PCH */
> >
> > +#define PCH_DISPLAY_BASE 0xc0000u
> > +
> > /* south display engine interrupt: IBX */
> > #define SDE_AUDIO_POWER_D (1 << 27)
> > #define SDE_AUDIO_POWER_C (1 << 26)
> > @@ -7671,13 +7664,6 @@ enum {
> > #define ICP_TC_HPD_LONG_DETECT(tc_port) (2 << (tc_port) * 4)
> > #define ICP_TC_HPD_SHORT_DETECT(tc_port) (1 << (tc_port) * 4)
> >
> > -#define PCH_GPIOA _MMIO(0xc5010)
> > -#define PCH_GPIOB _MMIO(0xc5014)
> > -#define PCH_GPIOC _MMIO(0xc5018)
> > -#define PCH_GPIOD _MMIO(0xc501c)
> > -#define PCH_GPIOE _MMIO(0xc5020)
> > -#define PCH_GPIOF _MMIO(0xc5024)
> > -
> > #define PCH_GMBUS0 _MMIO(0xc5100)
> > #define PCH_GMBUS1 _MMIO(0xc5104)
> > #define PCH_GMBUS2 _MMIO(0xc5108)
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index b09b6389a734..2d102f95b38e 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -152,6 +152,22 @@
> > * Display related stuff
> > */
> >
> > +enum i915_gpio {
> > + GPIOA = 0,
>
> =0 not really needed
>
> > + GPIOB,
> > + GPIOC,
> > + GPIOD,
> > + GPIOE,
> > + GPIOF,
> > + GPIOG,
> > + GPIOH,
> > + __GPIOI_UNUSED,
> > + GPIOJ,
> > + GPIOK,
> > + GPIOL,
> > + GPIOM,
> > +};
>
> Weren't most things like this moved into intel_display.h a while back?
>
> > +
> > /* store information about an Ixxx DVO */
> > /* The i830->i865 use multiple DVOs with multiple i2cs */
> > /* the i915, i945 have a single sDVO i2c bus - which is different */
> > diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
> > index bef32b7c248e..f03c7ca718b5 100644
> > --- a/drivers/gpu/drm/i915/intel_i2c.c
> > +++ b/drivers/gpu/drm/i915/intel_i2c.c
> > @@ -37,7 +37,7 @@
> >
> > struct gmbus_pin {
> > const char *name;
> > - i915_reg_t reg;
> > + enum i915_gpio gpio;
> > };
> >
> > /* Map gmbus pin pairs to names and registers. */
> > @@ -121,8 +121,7 @@ bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv,
> > else
> > size = ARRAY_SIZE(gmbus_pins);
> >
> > - return pin < size &&
> > - i915_mmio_reg_valid(get_gmbus_pin(dev_priv, pin)->reg);
> > + return pin < size && get_gmbus_pin(dev_priv, pin)->name;
> > }
> >
> > /* Intel GPIO access functions */
> > @@ -292,8 +291,7 @@ intel_gpio_setup(struct intel_gmbus *bus, unsigned int pin)
> >
> > algo = &bus->bit_algo;
> >
> > - bus->gpio_reg = _MMIO(dev_priv->gpio_mmio_base +
> > - i915_mmio_reg_offset(get_gmbus_pin(dev_priv, pin)->reg));
> > + bus->gpio_reg = GPIO(get_gmbus_pin(dev_priv, pin)->gpio);
> > bus->adapter.algo_data = algo;
> > algo->setsda = set_data;
> > algo->setscl = set_clock;
> > @@ -825,9 +823,7 @@ int intel_setup_gmbus(struct drm_i915_private *dev_priv)
> > if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> > dev_priv->gpio_mmio_base = VLV_DISPLAY_BASE;
> > else if (!HAS_GMCH_DISPLAY(dev_priv))
>
> I was slightly confused by this until I remeber that BXT uses the PCH
> offsets for the south stuff even though it doesn't have a PCH. Might
> want to add a comment here to unconfuse matter.
>
> > - dev_priv->gpio_mmio_base =
> > - i915_mmio_reg_offset(PCH_GPIOA) -
> > - i915_mmio_reg_offset(GPIOA);
> > + dev_priv->gpio_mmio_base = PCH_DISPLAY_BASE;
> >
> > mutex_init(&dev_priv->gmbus_mutex);
> > init_waitqueue_head(&dev_priv->gmbus_wait_queue);
> > --
> > 2.17.1
>
> --
> Ville Syrjälä
> Intel
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Lucas De Marchi
More information about the Intel-gfx
mailing list