[Intel-gfx] [PATCH v3 1/2] drm/i915: remove confusing GPIO vs PCH_GPIO

Ville Syrjälä ville.syrjala at linux.intel.com
Wed Jul 18 10:01:18 UTC 2018


On Tue, Jul 17, 2018 at 03:16:53PM -0700, Lucas De Marchi wrote:
> On Fri, Jul 13, 2018 at 9:10 AM Ville Syrjälä
> <ville.syrjala at linux.intel.com> wrote:
> >
> > On Fri, Jul 13, 2018 at 08:42:11AM -0700, Lucas De Marchi wrote:
> > > Instead of defining all registers twice, define just a PCH_GPIO_BASE
> > > that has the same address as PCH_GPIO_A and use that to calculate all
> > > the others. This also brings VLV and !HAS_GMCH_DISPLAY in line, doing
> > > the same thing.
> > >
> > > v2: Fix GMBUS registers to be relative to gpio base; create GPIO()
> > >     macro to return a particular gpio address and move the enum out of
> > >     i915_reg.h (suggested by Jani)
> > >
> > > v3: Move base offset inside the GPIO() macro so the GMBUS defines don't
> > >     actually need to be changed (suggested by Daniel/Ville)
> > >
> > > Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/gvt/handlers.c |  2 +-
> > >  drivers/gpu/drm/i915/i915_drv.h     |  3 ++-
> > >  drivers/gpu/drm/i915/i915_reg.h     | 24 +++++-------------------
> > >  drivers/gpu/drm/i915/intel_drv.h    | 16 ++++++++++++++++
> > >  drivers/gpu/drm/i915/intel_i2c.c    | 12 ++++--------
> > >  5 files changed, 28 insertions(+), 29 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c
> > > index 7a58ca555197..ecff866bbbf1 100644
> > > --- a/drivers/gpu/drm/i915/gvt/handlers.c
> > > +++ b/drivers/gpu/drm/i915/gvt/handlers.c
> > > @@ -2118,7 +2118,7 @@ static int init_generic_mmio_info(struct intel_gvt *gvt)
> > >
> > >       MMIO_F(PCH_GMBUS0, 4 * 4, 0, 0, 0, D_ALL, gmbus_mmio_read,
> > >               gmbus_mmio_write);
> > > -     MMIO_F(PCH_GPIOA, 6 * 4, F_UNALIGN, 0, 0, D_ALL, NULL, NULL);
> > > +     MMIO_F(GPIO(GPIOA), 6 * 4, F_UNALIGN, 0, 0, D_ALL, NULL, NULL);
> >
> > I have no idea of gpio_mmio_base is populated correctly at this point
> > for gvt, and I'm too lazy to find out.
> 
> humn, unfortunately it is not
> 
> i915_driver_load() -> i915_load_modeset_init() -> intel_setup_gmbus()
> -> dev_priv->gpio_mmio_base = ...
> i915_driver_load() -> i915_driver_init_hw() -> intel_gvt_init() ->
> intel_gvt_init_device() -> intel_gvt_setup_mmio_info() ->
> init_generic_mmio_info()
> 
> Is adding a single PCH_GPIO_BASE that doesn't depend on dev_priv being
> populated for use on gvt an option?

IIRC gvt already has some local register defines (possibly due to this
same reason?). Could add a few more I suppose. +cc the gvt folks to get
their input.

> 
> Lucas De Marchi
> 
> >
> > >       MMIO_F(_MMIO(0xe4f00), 0x28, 0, 0, 0, D_ALL, NULL, NULL);
> > >
> > >       MMIO_F(_MMIO(_PCH_DPB_AUX_CH_CTL), 6 * 4, 0, 0, 0, D_PRE_SKL, NULL,
> > > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > > index b31d48cf7a69..596e734a874f 100644
> > > --- a/drivers/gpu/drm/i915/i915_drv.h
> > > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > > @@ -1611,7 +1611,8 @@ struct drm_i915_private {
> > >       struct mutex gmbus_mutex;
> > >
> > >       /**
> > > -      * Base address of the gmbus and gpio block.
> > > +      * Base address of where the gmbus and gpio blocks are located (either
> > > +      * on PCH or on SoC for platforms without PCH).
> > >        */
> > >       uint32_t gpio_mmio_base;
> > >
> > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > > index 1f222af0324d..5e3ba9898f4e 100644
> > > --- a/drivers/gpu/drm/i915/i915_reg.h
> > > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > > @@ -3089,18 +3089,9 @@ enum i915_power_well_id {
> > >  /*
> > >   * GPIO regs
> > >   */
> > > -#define GPIOA                        _MMIO(0x5010)
> > > -#define GPIOB                        _MMIO(0x5014)
> > > -#define GPIOC                        _MMIO(0x5018)
> > > -#define GPIOD                        _MMIO(0x501c)
> > > -#define GPIOE                        _MMIO(0x5020)
> > > -#define GPIOF                        _MMIO(0x5024)
> > > -#define GPIOG                        _MMIO(0x5028)
> > > -#define GPIOH                        _MMIO(0x502c)
> > > -#define GPIOJ                        _MMIO(0x5034)
> > > -#define GPIOK                        _MMIO(0x5038)
> > > -#define GPIOL                        _MMIO(0x503C)
> > > -#define GPIOM                        _MMIO(0x5040)
> > > +#define GPIO(gpio)           _MMIO(dev_priv->gpio_mmio_base + 0x5010 + \
> > > +                                   4 * (gpio))
> > > +
> > >  # define GPIO_CLOCK_DIR_MASK         (1 << 0)
> > >  # define GPIO_CLOCK_DIR_IN           (0 << 1)
> > >  # define GPIO_CLOCK_DIR_OUT          (1 << 1)
> > > @@ -7483,6 +7474,8 @@ enum {
> > >
> > >  /* PCH */
> > >
> > > +#define PCH_DISPLAY_BASE     0xc0000u
> > > +
> > >  /* south display engine interrupt: IBX */
> > >  #define SDE_AUDIO_POWER_D    (1 << 27)
> > >  #define SDE_AUDIO_POWER_C    (1 << 26)
> > > @@ -7671,13 +7664,6 @@ enum {
> > >  #define   ICP_TC_HPD_LONG_DETECT(tc_port)    (2 << (tc_port) * 4)
> > >  #define   ICP_TC_HPD_SHORT_DETECT(tc_port)   (1 << (tc_port) * 4)
> > >
> > > -#define PCH_GPIOA               _MMIO(0xc5010)
> > > -#define PCH_GPIOB               _MMIO(0xc5014)
> > > -#define PCH_GPIOC               _MMIO(0xc5018)
> > > -#define PCH_GPIOD               _MMIO(0xc501c)
> > > -#define PCH_GPIOE               _MMIO(0xc5020)
> > > -#define PCH_GPIOF               _MMIO(0xc5024)
> > > -
> > >  #define PCH_GMBUS0           _MMIO(0xc5100)
> > >  #define PCH_GMBUS1           _MMIO(0xc5104)
> > >  #define PCH_GMBUS2           _MMIO(0xc5108)
> > > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > > index b09b6389a734..2d102f95b38e 100644
> > > --- a/drivers/gpu/drm/i915/intel_drv.h
> > > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > > @@ -152,6 +152,22 @@
> > >   * Display related stuff
> > >   */
> > >
> > > +enum i915_gpio {
> > > +     GPIOA = 0,
> >
> > =0 not really needed
> >
> > > +     GPIOB,
> > > +     GPIOC,
> > > +     GPIOD,
> > > +     GPIOE,
> > > +     GPIOF,
> > > +     GPIOG,
> > > +     GPIOH,
> > > +     __GPIOI_UNUSED,
> > > +     GPIOJ,
> > > +     GPIOK,
> > > +     GPIOL,
> > > +     GPIOM,
> > > +};
> >
> > Weren't most things like this moved into intel_display.h a while back?
> >
> > > +
> > >  /* store information about an Ixxx DVO */
> > >  /* The i830->i865 use multiple DVOs with multiple i2cs */
> > >  /* the i915, i945 have a single sDVO i2c bus - which is different */
> > > diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
> > > index bef32b7c248e..f03c7ca718b5 100644
> > > --- a/drivers/gpu/drm/i915/intel_i2c.c
> > > +++ b/drivers/gpu/drm/i915/intel_i2c.c
> > > @@ -37,7 +37,7 @@
> > >
> > >  struct gmbus_pin {
> > >       const char *name;
> > > -     i915_reg_t reg;
> > > +     enum i915_gpio gpio;
> > >  };
> > >
> > >  /* Map gmbus pin pairs to names and registers. */
> > > @@ -121,8 +121,7 @@ bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv,
> > >       else
> > >               size = ARRAY_SIZE(gmbus_pins);
> > >
> > > -     return pin < size &&
> > > -             i915_mmio_reg_valid(get_gmbus_pin(dev_priv, pin)->reg);
> > > +     return pin < size && get_gmbus_pin(dev_priv, pin)->name;
> > >  }
> > >
> > >  /* Intel GPIO access functions */
> > > @@ -292,8 +291,7 @@ intel_gpio_setup(struct intel_gmbus *bus, unsigned int pin)
> > >
> > >       algo = &bus->bit_algo;
> > >
> > > -     bus->gpio_reg = _MMIO(dev_priv->gpio_mmio_base +
> > > -                           i915_mmio_reg_offset(get_gmbus_pin(dev_priv, pin)->reg));
> > > +     bus->gpio_reg = GPIO(get_gmbus_pin(dev_priv, pin)->gpio);
> > >       bus->adapter.algo_data = algo;
> > >       algo->setsda = set_data;
> > >       algo->setscl = set_clock;
> > > @@ -825,9 +823,7 @@ int intel_setup_gmbus(struct drm_i915_private *dev_priv)
> > >       if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> > >               dev_priv->gpio_mmio_base = VLV_DISPLAY_BASE;
> > >       else if (!HAS_GMCH_DISPLAY(dev_priv))
> >
> > I was slightly confused by this until I remeber that BXT uses the PCH
> > offsets for the south stuff even though it doesn't have a PCH. Might
> > want to add a comment here to unconfuse matter.
> >
> > > -             dev_priv->gpio_mmio_base =
> > > -                     i915_mmio_reg_offset(PCH_GPIOA) -
> > > -                     i915_mmio_reg_offset(GPIOA);
> > > +             dev_priv->gpio_mmio_base = PCH_DISPLAY_BASE;
> > >
> > >       mutex_init(&dev_priv->gmbus_mutex);
> > >       init_waitqueue_head(&dev_priv->gmbus_wait_queue);
> > > --
> > > 2.17.1
> >
> > --
> > Ville Syrjälä
> > Intel
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> 
> 
> -- 
> Lucas De Marchi

-- 
Ville Syrjälä
Intel


More information about the Intel-gfx mailing list