[Intel-gfx] [PATCH v3 2/2] drm/i915/icl: Do read-modify-write as needed during MG PLL programming
Kulkarni, Vandita
vandita.kulkarni at intel.com
Wed Jun 20 13:31:19 UTC 2018
> -----Original Message-----
> From: Deak, Imre
> Sent: Tuesday, June 19, 2018 10:11 PM
> To: intel-gfx at lists.freedesktop.org
> Cc: Kulkarni, Vandita <vandita.kulkarni at intel.com>; Zanoni, Paulo R
> <paulo.r.zanoni at intel.com>; Ausmus, James <james.ausmus at intel.com>
> Subject: [PATCH v3 2/2] drm/i915/icl: Do read-modify-write as needed
> during MG PLL programming
>
> Some MG PLL registers have fields that need to be preserved at their HW
> default or BIOS programmed values. So make sure we preserve them.
>
> v2:
> - Add comment to icl_mg_pll_write() explaining the need for register
> masks. (Vandita)
> - Fix patchwork checkpatch warning.
>
> v3:
> - Rebase on drm-tip.
>
> Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> Cc: James Ausmus <james.ausmus at intel.com>
> Signed-off-by: Imre Deak <imre.deak at intel.com>
> Reviewed-by: James Ausmus <james.ausmus at intel.com> (v1)
Looks good to me.
Reviewed-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 13 ++++++++++++
> drivers/gpu/drm/i915/intel_dpll_mgr.c | 39
> +++++++++++++++++++++++++++++++----
> 2 files changed, 48 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h
> b/drivers/gpu/drm/i915/i915_reg.h index 4bfd7a9bd75f..65b222287ee4
> 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -9047,6 +9047,7 @@ enum skl_power_gate {
> #define _MG_REFCLKIN_CTL_PORT3 0x16A92C
> #define _MG_REFCLKIN_CTL_PORT4 0x16B92C
> #define MG_REFCLKIN_CTL_OD_2_MUX(x) ((x) << 8)
> +#define MG_REFCLKIN_CTL_OD_2_MUX_MASK (0x7
> << 8)
> #define MG_REFCLKIN_CTL(port) _MMIO_PORT((port) - PORT_C, \
> _MG_REFCLKIN_CTL_PORT1, \
> _MG_REFCLKIN_CTL_PORT2)
> @@ -9056,7 +9057,9 @@ enum skl_power_gate {
> #define _MG_CLKTOP2_CORECLKCTL1_PORT3
> 0x16A8D8
> #define _MG_CLKTOP2_CORECLKCTL1_PORT4
> 0x16B8D8
> #define MG_CLKTOP2_CORECLKCTL1_B_DIVRATIO(x) ((x)
> << 16)
> +#define MG_CLKTOP2_CORECLKCTL1_B_DIVRATIO_MASK (0xff << 16)
> #define MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO(x) ((x)
> << 8)
> +#define MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO_MASK (0xff << 8)
> #define MG_CLKTOP2_CORECLKCTL1(port) _MMIO_PORT((port) - PORT_C,
> \
>
> _MG_CLKTOP2_CORECLKCTL1_PORT1, \
>
> _MG_CLKTOP2_CORECLKCTL1_PORT2)
> @@ -9066,9 +9069,13 @@ enum skl_power_gate {
> #define _MG_CLKTOP2_HSCLKCTL_PORT3 0x16A8D4
> #define _MG_CLKTOP2_HSCLKCTL_PORT4 0x16B8D4
> #define MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL(x) ((x)
> << 16)
> +#define MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL_MASK (0x1 << 16)
> #define MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL(x) ((x) << 14)
> +#define MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL_MASK (0x3
> << 14)
> #define MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO(x) ((x) << 12)
> +#define MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK (0x3
> << 12)
> #define MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO(x) ((x) << 8)
> +#define MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK (0xf
> << 8)
> #define MG_CLKTOP2_HSCLKCTL(port) _MMIO_PORT((port) - PORT_C, \
>
> _MG_CLKTOP2_HSCLKCTL_PORT1, \
>
> _MG_CLKTOP2_HSCLKCTL_PORT2)
> @@ -9142,12 +9149,18 @@ enum skl_power_gate {
> #define _MG_PLL_BIAS_PORT3 0x16AA14
> #define _MG_PLL_BIAS_PORT4 0x16BA14
> #define MG_PLL_BIAS_BIAS_GB_SEL(x) ((x) << 30)
> +#define MG_PLL_BIAS_BIAS_GB_SEL_MASK (0x3
> << 30)
> #define MG_PLL_BIAS_INIT_DCOAMP(x) ((x) << 24)
> +#define MG_PLL_BIAS_INIT_DCOAMP_MASK (0x3f
> << 24)
> #define MG_PLL_BIAS_BIAS_BONUS(x) ((x) << 16)
> +#define MG_PLL_BIAS_BIAS_BONUS_MASK (0xff << 16)
> #define MG_PLL_BIAS_BIASCAL_EN (1 << 15)
> #define MG_PLL_BIAS_CTRIM(x) ((x) << 8)
> +#define MG_PLL_BIAS_CTRIM_MASK (0x1f << 8)
> #define MG_PLL_BIAS_VREF_RDAC(x) ((x) << 5)
> +#define MG_PLL_BIAS_VREF_RDAC_MASK (0x7 << 5)
> #define MG_PLL_BIAS_IREFTRIM(x) ((x) << 0)
> +#define MG_PLL_BIAS_IREFTRIM_MASK (0x1f << 0)
> #define MG_PLL_BIAS(port) _MMIO_PORT((port) - PORT_C,
> _MG_PLL_BIAS_PORT1, \
> _MG_PLL_BIAS_PORT2)
>
> diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> index d4c7bacbe83e..57342364fd30 100644
> --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> @@ -2945,10 +2945,21 @@ static bool icl_pll_get_hw_state(struct
> drm_i915_private *dev_priv,
> case DPLL_ID_ICL_MGPLL4:
> port = icl_mg_pll_id_to_port(id);
> hw_state->mg_refclkin_ctl =
> I915_READ(MG_REFCLKIN_CTL(port));
> + hw_state->mg_refclkin_ctl &=
> MG_REFCLKIN_CTL_OD_2_MUX_MASK;
> +
> hw_state->mg_clktop2_coreclkctl1 =
> I915_READ(MG_CLKTOP2_CORECLKCTL1(port));
> + hw_state->mg_clktop2_coreclkctl1 &=
> + MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO_MASK;
> +
> hw_state->mg_clktop2_hsclkctl =
> I915_READ(MG_CLKTOP2_HSCLKCTL(port));
> + hw_state->mg_clktop2_hsclkctl &=
> + MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL_MASK
> |
> + MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL_MASK |
> + MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK |
> + MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK;
> +
> hw_state->mg_pll_div0 = I915_READ(MG_PLL_DIV0(port));
> hw_state->mg_pll_div1 = I915_READ(MG_PLL_DIV1(port));
> hw_state->mg_pll_lf = I915_READ(MG_PLL_LF(port)); @@ -
> 2998,10 +3009,30 @@ static void icl_mg_pll_write(struct
> drm_i915_private *dev_priv,
> enum port port = icl_mg_pll_id_to_port(pll->info->id);
> u32 val;
>
> - I915_WRITE(MG_REFCLKIN_CTL(port), hw_state->mg_refclkin_ctl);
> - I915_WRITE(MG_CLKTOP2_CORECLKCTL1(port),
> - hw_state->mg_clktop2_coreclkctl1);
> - I915_WRITE(MG_CLKTOP2_HSCLKCTL(port), hw_state-
> >mg_clktop2_hsclkctl);
> + /*
> + * Some of the following registers have reserved fields, so program
> + * these with RMW based on a mask. The mask can be fixed or
> generated
> + * during the calc/readout phase if the mask depends on some
> other HW
> + * state like refclk, see icl_calc_mg_pll_state().
> + */
> + val = I915_READ(MG_REFCLKIN_CTL(port));
> + val &= ~MG_REFCLKIN_CTL_OD_2_MUX_MASK;
> + val |= hw_state->mg_refclkin_ctl;
> + I915_WRITE(MG_REFCLKIN_CTL(port), val);
> +
> + val = I915_READ(MG_CLKTOP2_CORECLKCTL1(port));
> + val &= ~MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO_MASK;
> + val |= hw_state->mg_clktop2_coreclkctl1;
> + I915_WRITE(MG_CLKTOP2_CORECLKCTL1(port), val);
> +
> + val = I915_READ(MG_CLKTOP2_HSCLKCTL(port));
> + val &= ~(MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL_MASK |
> + MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL_MASK |
> + MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK |
> + MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK);
> + val |= hw_state->mg_clktop2_hsclkctl;
> + I915_WRITE(MG_CLKTOP2_HSCLKCTL(port), val);
> +
> I915_WRITE(MG_PLL_DIV0(port), hw_state->mg_pll_div0);
> I915_WRITE(MG_PLL_DIV1(port), hw_state->mg_pll_div1);
> I915_WRITE(MG_PLL_LF(port), hw_state->mg_pll_lf);
> --
> 2.13.2
More information about the Intel-gfx
mailing list