[Intel-gfx] [PATCH v3 1/5] drm/i915: Move DP modeset retry work into intel_dp

Ville Syrjälä ville.syrjala at linux.intel.com
Mon Mar 12 21:01:02 UTC 2018


On Fri, Mar 09, 2018 at 04:32:27PM -0500, Lyude Paul wrote:
> While having the modeset_retry_work in intel_connector makes sense with
> SST, this paradigm doesn't make a whole ton of sense when it comes to
> MST since we have to deal with multiple connectors. In most cases, it's
> more useful to just use the intel_dp struct since it indicates whether
> or not we're dealing with an MST device, along with being able to easily
> trace the intel_dp struct back to it's respective connector (if there is
> any). So, move the modeset_retry_work function out of the
> intel_connector struct and into intel_dp.
> 
> Signed-off-by: Lyude Paul <lyude at redhat.com>
> Reviewed-by: Manasi Navare <manasi.d.navare at intel.com>
> Cc: Manasi Navare <manasi.d.navare at intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> V2:
>  - Remove accidental duplicate modeset_retry_work in intel_connector
> V3:
>  - Also check against eDP in intel_hpd_poll_fini() - mdnavare
> Signed-off-by: Lyude Paul <lyude at redhat.com>
> ---
>  drivers/gpu/drm/i915/intel_display.c          | 25 +++++++++++++++++++++++--
>  drivers/gpu/drm/i915/intel_dp.c               | 10 ++++------
>  drivers/gpu/drm/i915/intel_dp_link_training.c |  2 +-
>  drivers/gpu/drm/i915/intel_drv.h              |  6 +++---
>  4 files changed, 31 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index f424fff477f6..3b7fa430a84a 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -15394,16 +15394,37 @@ static void intel_hpd_poll_fini(struct drm_device *dev)
>  {
>  	struct intel_connector *connector;
>  	struct drm_connector_list_iter conn_iter;
> +	struct work_struct *work;
> +	int conn_type;
>  
>  	/* Kill all the work that may have been queued by hpd. */
>  	drm_connector_list_iter_begin(dev, &conn_iter);
>  	for_each_intel_connector_iter(connector, &conn_iter) {
> -		if (connector->modeset_retry_work.func)
> -			cancel_work_sync(&connector->modeset_retry_work);
>  		if (connector->hdcp_shim) {
>  			cancel_delayed_work_sync(&connector->hdcp_check_work);
>  			cancel_work_sync(&connector->hdcp_prop_work);
>  		}
> +
> +		conn_type = connector->base.connector_type;
> +		if (conn_type != DRM_MODE_CONNECTOR_eDP &&
> +		    conn_type != DRM_MODE_CONNECTOR_DisplayPort)
> +			continue;
> +
> +		if (connector->mst_port) {
> +			work = &connector->mst_port->modeset_retry_work;
> +		} else {
> +			struct intel_encoder *intel_encoder =
> +				connector->encoder;
> +			struct intel_dp *intel_dp;
> +
> +			if (!intel_encoder)
> +				continue;
> +
> +			intel_dp = enc_to_intel_dp(&intel_encoder->base);
> +			work = &intel_dp->modeset_retry_work;
> +		}
> +
> +		cancel_work_sync(work);

Why are we even walking the connectors for this? Can't we just
walk the encoders instead?

>  	}
>  	drm_connector_list_iter_end(&conn_iter);
>  }
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 4dd1b2287dd6..5abf0c95725a 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -6261,12 +6261,10 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
>  
>  static void intel_dp_modeset_retry_work_fn(struct work_struct *work)
>  {
> -	struct intel_connector *intel_connector;
> -	struct drm_connector *connector;
> +	struct intel_dp *intel_dp = container_of(work, typeof(*intel_dp),
> +						 modeset_retry_work);
> +	struct drm_connector *connector = &intel_dp->attached_connector->base;
>  
> -	intel_connector = container_of(work, typeof(*intel_connector),
> -				       modeset_retry_work);
> -	connector = &intel_connector->base;
>  	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id,
>  		      connector->name);
>  
> @@ -6295,7 +6293,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
>  	int type;
>  
>  	/* Initialize the work for modeset in case of link train failure */
> -	INIT_WORK(&intel_connector->modeset_retry_work,
> +	INIT_WORK(&intel_dp->modeset_retry_work,
>  		  intel_dp_modeset_retry_work_fn);
>  
>  	if (WARN(intel_dig_port->max_lanes < 1,
> diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c b/drivers/gpu/drm/i915/intel_dp_link_training.c
> index f59b59bb0a21..2cfa58ce1f95 100644
> --- a/drivers/gpu/drm/i915/intel_dp_link_training.c
> +++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
> @@ -340,7 +340,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
>  							     intel_dp->link_rate,
>  							     intel_dp->lane_count))
>  			/* Schedule a Hotplug Uevent to userspace to start modeset */
> -			schedule_work(&intel_connector->modeset_retry_work);
> +			schedule_work(&intel_dp->modeset_retry_work);
>  	} else {
>  		DRM_ERROR("[CONNECTOR:%d:%s] Link Training failed at link rate = %d, lane count = %d",
>  			  intel_connector->base.base.id,
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 83e5ca889d9c..3f19dc80997f 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -406,9 +406,6 @@ struct intel_connector {
>  
>  	struct intel_dp *mst_port;
>  
> -	/* Work struct to schedule a uevent on link train failure */
> -	struct work_struct modeset_retry_work;
> -
>  	const struct intel_hdcp_shim *hdcp_shim;
>  	struct mutex hdcp_mutex;
>  	uint64_t hdcp_value; /* protected by hdcp_mutex */
> @@ -1135,6 +1132,9 @@ struct intel_dp {
>  
>  	/* Displayport compliance testing */
>  	struct intel_dp_compliance compliance;
> +
> +	/* Work struct to schedule a uevent on link train failure */
> +	struct work_struct modeset_retry_work;
>  };
>  
>  struct intel_lspcon {
> -- 
> 2.14.3

-- 
Ville Syrjälä
Intel OTC


More information about the Intel-gfx mailing list