[Intel-gfx] [RFC v5] drm/i915/psr: Kill scheduled work for Core platforms.
Pandiyan, Dhinakaran
dhinakaran.pandiyan at intel.com
Wed Mar 14 20:24:13 UTC 2018
On Tue, 2018-03-13 at 15:23 -0700, Rodrigo Vivi wrote:
> The immediate enabling is actually not an issue for the
> HW perspective for core platforms that have HW tracking.
> HW will wait few identical idle frames before transitioning
> to actual psr active anyways.
>
> Note that this patch also remove the delayed activation
> on HSW and BDW introduced by commit 'd0ac896a477d
> ("drm/i915: Delay first PSR activation.")'. This was
> introduced to fix a blank screen on VLV/CHV and also
> masked some frozen screens on other core platforms.
> Probably the same that we are now properly hunting and fixing.
>
> Furthermore, if we stop using delayed activation on core
> platforms we will be able, on following up patches,
> to use available workarounds to make HW tracking properly
> exit PSR instead of the big nuke of disabling psr and
> re-enable on exit and activate respectively.
> At least on few reliable cases.
>
> v2:(DK): Remove unnecessary WARN_ONs and make some other
> VLV | CHV more readable.
> v3: Do it regardless the timer rework.
> v4: (DK/CI): Add VLV || CHV check on cancel work at psr_disable.
> v5: Kill remaining items and fully rework activation functions.
>
> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> ---
> drivers/gpu/drm/i915/i915_debugfs.c | 20 +++---
> drivers/gpu/drm/i915/i915_drv.h | 3 +-
> drivers/gpu/drm/i915/intel_psr.c | 134 ++++++++++++++----------------------
> 3 files changed, 65 insertions(+), 92 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 972014b2497d..7dfada863f9c 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -2567,15 +2567,14 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
> seq_printf(m, "Enabled: %s\n", yesno((bool)dev_priv->psr.enabled));
> seq_printf(m, "Busy frontbuffer bits: 0x%03x\n",
> dev_priv->psr.busy_frontbuffer_bits);
> - seq_printf(m, "Re-enable work scheduled: %s\n",
> - yesno(work_busy(&dev_priv->psr.work.work)));
>
> - if (HAS_DDI(dev_priv)) {
> - if (dev_priv->psr.psr2_support)
> - enabled = I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE;
> - else
> - enabled = I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE;
> - } else {
> + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> + bool scheduled;
> +
> + scheduled = work_busy(&dev_priv->psr.vlv_activate_work.work);
> + seq_printf(m, "Re-enable work scheduled: %s\n",
> + yesno(scheduled));
> +
> for_each_pipe(dev_priv, pipe) {
> enum transcoder cpu_transcoder =
> intel_pipe_to_cpu_transcoder(dev_priv, pipe);
> @@ -2594,6 +2593,11 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
>
> intel_display_power_put(dev_priv, power_domain);
> }
> + } else {
> + if (dev_priv->psr.psr2_support)
> + enabled = I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE;
> + else
> + enabled = I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE;
> }
>
> seq_printf(m, "Main link in standby mode: %s\n",
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 74b0e9d8ff62..409997f29e07 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -598,7 +598,7 @@ struct i915_psr {
> bool sink_support;
> struct intel_dp *enabled;
> bool active;
> - struct delayed_work work;
> + struct delayed_work vlv_activate_work;
> unsigned busy_frontbuffer_bits;
> bool psr2_support;
> bool aux_frame_sync;
> @@ -613,7 +613,6 @@ struct i915_psr {
> void (*disable_source)(struct intel_dp *,
> const struct intel_crtc_state *);
> void (*enable_sink)(struct intel_dp *);
> - void (*activate)(struct intel_dp *);
> void (*setup_vsc)(struct intel_dp *, const struct intel_crtc_state *);
> };
>
> diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
> index 317cb4a12693..bc7b94a06417 100644
> --- a/drivers/gpu/drm/i915/intel_psr.c
> +++ b/drivers/gpu/drm/i915/intel_psr.c
> @@ -311,24 +311,6 @@ static void vlv_psr_enable_source(struct intel_dp *intel_dp,
> VLV_EDP_PSR_ENABLE);
> }
>
> -static void vlv_psr_activate(struct intel_dp *intel_dp)
> -{
> - struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> - struct drm_device *dev = dig_port->base.base.dev;
> - struct drm_i915_private *dev_priv = to_i915(dev);
> - struct drm_crtc *crtc = dig_port->base.base.crtc;
> - enum pipe pipe = to_intel_crtc(crtc)->pipe;
> -
> - /*
> - * Let's do the transition from PSR_state 1 (inactive) to
> - * PSR_state 2 (transition to active - static frame transmission).
> - * Then Hardware is responsible for the transition to
> - * PSR_state 3 (active - no Remote Frame Buffer (RFB) update).
> - */
> - I915_WRITE(VLV_PSRCTL(pipe), I915_READ(VLV_PSRCTL(pipe)) |
> - VLV_EDP_PSR_ACTIVE_ENTRY);
> -}
> -
> static void hsw_activate_psr1(struct intel_dp *intel_dp)
> {
> struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> @@ -434,16 +416,25 @@ static void hsw_psr_activate(struct intel_dp *intel_dp)
> struct drm_device *dev = dig_port->base.base.dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
>
> + WARN_ON(dev_priv->psr.active);
> + lockdep_assert_held(&dev_priv->psr.lock);
> +
> /* On HSW+ after we enable PSR on source it will activate it
> * as soon as it match configure idle_frame count. So
> * we just actually enable it here on activation time.
> */
> + if (dev_priv->psr.psr2_support)
> + WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
> + else
> + WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
>
> /* psr1 and psr2 are mutually exclusive.*/
> if (dev_priv->psr.psr2_support)
> hsw_activate_psr2(intel_dp);
> else
> hsw_activate_psr1(intel_dp);
nit: The branches can be grouped together.
> +
> + dev_priv->psr.active = true;
> }
>
> static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
> @@ -568,15 +559,20 @@ static void intel_psr_activate(struct intel_dp *intel_dp)
> struct drm_device *dev = intel_dig_port->base.base.dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
>
> - if (dev_priv->psr.psr2_support)
> - WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
> - else
> - WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
> - WARN_ON(dev_priv->psr.active);
> - lockdep_assert_held(&dev_priv->psr.lock);
> + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> + /*
> + * FIXME: VLV/CHV has many problems, but worst being blank
> + * screens on first activation. Let's pick the worst case
> + * delay for now.
> + */
> + int delay = 1500;
>
> - dev_priv->psr.activate(intel_dp);
> - dev_priv->psr.active = true;
> + if (!work_busy(&dev_priv->psr.vlv_activate_work.work))
Since the work is already cancelled, do we need this?
The patch looks good to me, fewer indirect calls and easier to read.
> + schedule_delayed_work(&dev_priv->psr.vlv_activate_work,
> + msecs_to_jiffies(delay));
> + } else {
> + hsw_psr_activate(intel_dp);
> + }
> }
>
> static void hsw_psr_enable_source(struct intel_dp *intel_dp,
> @@ -652,22 +648,7 @@ void intel_psr_enable(struct intel_dp *intel_dp,
> dev_priv->psr.enable_source(intel_dp, crtc_state);
> dev_priv->psr.enabled = intel_dp;
>
> - if (INTEL_GEN(dev_priv) >= 9) {
> - intel_psr_activate(intel_dp);
> - } else {
> - /*
> - * FIXME: Activation should happen immediately since this
> - * function is just called after pipe is fully trained and
> - * enabled.
> - * However on some platforms we face issues when first
> - * activation follows a modeset so quickly.
> - * - On VLV/CHV we get bank screen on first activation
> - * - On HSW/BDW we get a recoverable frozen screen until
> - * next exit-activate sequence.
> - */
> - schedule_delayed_work(&dev_priv->psr.work,
> - msecs_to_jiffies(intel_dp->panel_power_cycle_delay * 5));
> - }
> + intel_psr_activate(intel_dp);
>
> unlock:
> mutex_unlock(&dev_priv->psr.lock);
> @@ -786,13 +767,14 @@ void intel_psr_disable(struct intel_dp *intel_dp,
> dev_priv->psr.enabled = NULL;
> mutex_unlock(&dev_priv->psr.lock);
>
> - cancel_delayed_work_sync(&dev_priv->psr.work);
> + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> + cancel_delayed_work_sync(&dev_priv->psr.vlv_activate_work);
> }
>
> -static void intel_psr_work(struct work_struct *work)
> +static void vlv_psr_activate_work(struct work_struct *work)
> {
> struct drm_i915_private *dev_priv =
> - container_of(work, typeof(*dev_priv), psr.work.work);
> + container_of(work, typeof(*dev_priv), psr.vlv_activate_work.work);
> struct intel_dp *intel_dp = dev_priv->psr.enabled;
> struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
> enum pipe pipe = to_intel_crtc(crtc)->pipe;
> @@ -802,35 +784,13 @@ static void intel_psr_work(struct work_struct *work)
> * PSR might take some time to get fully disabled
> * and be ready for re-enable.
> */
> - if (HAS_DDI(dev_priv)) {
> - if (dev_priv->psr.psr2_support) {
> - if (intel_wait_for_register(dev_priv,
> - EDP_PSR2_STATUS,
> - EDP_PSR2_STATUS_STATE_MASK,
> - 0,
> - 50)) {
> - DRM_ERROR("Timed out waiting for PSR2 Idle for re-enable\n");
> - return;
> - }
> - } else {
> - if (intel_wait_for_register(dev_priv,
> - EDP_PSR_STATUS,
> - EDP_PSR_STATUS_STATE_MASK,
> - 0,
> - 50)) {
> - DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
> - return;
> - }
> - }
> - } else {
> - if (intel_wait_for_register(dev_priv,
> - VLV_PSRSTAT(pipe),
> - VLV_EDP_PSR_IN_TRANS,
> - 0,
> - 1)) {
> - DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
> - return;
> - }
> + if (intel_wait_for_register(dev_priv,
> + VLV_PSRSTAT(pipe),
> + VLV_EDP_PSR_IN_TRANS,
> + 0,
> + 1)) {
> + DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
> + return;
> }
> mutex_lock(&dev_priv->psr.lock);
> intel_dp = dev_priv->psr.enabled;
> @@ -846,8 +806,17 @@ static void intel_psr_work(struct work_struct *work)
> if (dev_priv->psr.busy_frontbuffer_bits)
> goto unlock;
>
> - intel_psr_activate(intel_dp);
> -unlock:
> + /*
> + * Let's do the transition from PSR_state 1 (inactive) to
> + * PSR_state 2 (transition to active - static frame transmission).
> + * Then Hardware is responsible for the transition to
> + * PSR_state 3 (active - no Remote Frame Buffer (RFB) update).
> + */
> + I915_WRITE(VLV_PSRCTL(pipe), I915_READ(VLV_PSRCTL(pipe)) |
> + VLV_EDP_PSR_ACTIVE_ENTRY);
> + dev_priv->psr.active = true;
> +
> + unlock:
> mutex_unlock(&dev_priv->psr.lock);
> }
>
> @@ -1021,6 +990,9 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,
> if (dev_priv->psr.has_hw_tracking && origin == ORIGIN_FLIP)
> return;
>
> + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> + cancel_delayed_work_sync(&dev_priv->psr.vlv_activate_work);
psr_invalidate() will also need a cancel_delayed_work_sync() I wonder if
this should move to intel_psr_exit(), right before writing to
VLV_PSRCTL.
> +
> mutex_lock(&dev_priv->psr.lock);
> if (!dev_priv->psr.enabled) {
> mutex_unlock(&dev_priv->psr.lock);
> @@ -1053,9 +1025,8 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,
> }
>
> if (!dev_priv->psr.active && !dev_priv->psr.busy_frontbuffer_bits)
> - if (!work_busy(&dev_priv->psr.work.work))
> - schedule_delayed_work(&dev_priv->psr.work,
> - msecs_to_jiffies(100));
> + intel_psr_activate(dev_priv->psr.enabled);
> +
> mutex_unlock(&dev_priv->psr.lock);
> }
>
> @@ -1102,21 +1073,20 @@ void intel_psr_init(struct drm_i915_private *dev_priv)
> dev_priv->psr.link_standby = false;
> }
>
> - INIT_DELAYED_WORK(&dev_priv->psr.work, intel_psr_work);
> mutex_init(&dev_priv->psr.lock);
>
> if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> + INIT_DELAYED_WORK(&dev_priv->psr.vlv_activate_work,
> + vlv_psr_activate_work);
> dev_priv->psr.enable_source = vlv_psr_enable_source;
> dev_priv->psr.disable_source = vlv_psr_disable;
> dev_priv->psr.enable_sink = vlv_psr_enable_sink;
> - dev_priv->psr.activate = vlv_psr_activate;
> dev_priv->psr.setup_vsc = vlv_psr_setup_vsc;
> } else {
> dev_priv->psr.has_hw_tracking = true;
> dev_priv->psr.enable_source = hsw_psr_enable_source;
> dev_priv->psr.disable_source = hsw_psr_disable;
> dev_priv->psr.enable_sink = hsw_psr_enable_sink;
We might be able to remove enable_sink also if my aux patch goes
through. enable_*sink* required platform specific hooks is a bit odd
IMO.
> - dev_priv->psr.activate = hsw_psr_activate;
> dev_priv->psr.setup_vsc = hsw_psr_setup_vsc;
> }
> }
More information about the Intel-gfx
mailing list