[Intel-gfx] [PATCH] drm/dp: Correctly mask DP_TRAINING_AUX_RD_INTERVAL values for DP 1.4

[Jani Nikula]

On Fri, 16 Mar 2018, matthew.s.atwood at intel.com wrote:
> From: Matt Atwood <matthew.s.atwood at intel.com>
>
> DP_TRAINING_AUX_RD_INTERVAL with DP 1.3 spec changed bit scheeme from 8
> bits to 7 in DPCD 0x000e. The 8th bit is used to identify extended
> receiver capabilities. For panels that use this new feature wait interval
> would be increased by 512 ms, when spec is max 16 ms. This behavior is
> described in table 2-158 of DP 1.4 spec address 0000eh.
>
> With the introduction of DP 1.4 spec main link clock recovery was
> standardized to 100 us regardless of TRAINING_AUX_RD_INTERVAL value.
>
> To avoid breaking panels that are not spec compiant we now warn on
> invalid values.
>
> V2: commit title/message, masking all 7 bits, warn on out of spec values.
> V3: commit message, make link train clock recovery follow DP 1.4 spec.
> V4: style changes
> V5: typo
> V6: print statement revisions, DP_REV to DPCD_REV, comment correction
> V7: typo
> V8: Style
>
> Signed-off-by: Matt Atwood <matthew.s.atwood at intel.com>
> ---
>  drivers/gpu/drm/drm_dp_helper.c | 22 ++++++++++++++++++----
>  include/drm/drm_dp_helper.h     |  6 ++++++

This should be sent to dri-devel. See scripts/get_maintainer.pl.

BR,
Jani.


-- 
Jani Nikula, Intel Open Source Technology Center