[Intel-gfx] [PATCH 2/2] drm/i915: Implement WaProgramMgsrForL3BankSpecificMmioReads

Yunwei Zhang yunwei.zhang at intel.com
Mon Mar 19 21:50:08 UTC 2018


L3Bank could be fused off in hardware for debug purpose, and it
is possible that subslice is enabled while its corresponding L3Bank pairs
are disabled. In such case, if MCR packet control register(0xFDC) is
programed to point to a disabled bank pair, a MMIO read into L3Bank range
will return 0 instead of correct values.

However, this is not going to be the case in any production silicon.
Therefore, we only check at initialization and issue a warning should
this really happen.

Signed-off-by: Yunwei Zhang <yunwei.zhang at intel.com>
Cc: Oscar Mateo <oscar.mateo at intel.com>
Cc: Michel Thierry <michel.thierry at intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h        |  4 ++++
 drivers/gpu/drm/i915/intel_engine_cs.c | 19 +++++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index abdc513..b283427 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2849,6 +2849,10 @@ enum i915_power_well_id {
 #define   GEN10_F2_SS_DIS_SHIFT		18
 #define   GEN10_F2_SS_DIS_MASK		(0xf << GEN10_F2_SS_DIS_SHIFT)
 
+#define	GEN10_MIRROR_FUSE3		_MMIO(0x9118)
+#define GEN10_L3BANK_PAIR_COUNT     4
+#define GEN10_L3BANK_MASK   0x0F
+
 #define GEN8_EU_DISABLE0		_MMIO(0x9134)
 #define   GEN8_EU_DIS0_S0_MASK		0xffffff
 #define   GEN8_EU_DIS0_S1_SHIFT		24
diff --git a/drivers/gpu/drm/i915/intel_engine_cs.c b/drivers/gpu/drm/i915/intel_engine_cs.c
index bc8fed7..c17d2d5 100644
--- a/drivers/gpu/drm/i915/intel_engine_cs.c
+++ b/drivers/gpu/drm/i915/intel_engine_cs.c
@@ -798,7 +798,26 @@ static u32 calculate_mcr(u32 mcr, struct drm_i915_private *dev_priv)
 static void wa_init_mcr(struct drm_i915_private *dev_priv)
 {
 	u32 mcr;
+	u32 fuse3;
+	const struct sseu_dev_info *sseu = &(INTEL_INFO(dev_priv)->sseu);
+	u32 slice;
 
+	/* If more than one slice are enabled, L3Banks should be all enabled */
+	if (hweight8(sseu->slice_mask) == 1) {
+		/*
+		 * WaProgramMgsrForL3BankSpecificMmioReads:
+		 * read FUSE3 for enabled L3 Bank IDs, if L3 Bank matches
+		 * enabled subslice, no need to redirect MCR packet
+		 */
+		slice = find_last_bit((unsigned long *)&(sseu->slice_mask),
+				       sizeof(sseu->slice_mask));
+		fuse3 = I915_READ(GEN10_MIRROR_FUSE3);
+		if (WARN_ON(!((fuse3 & GEN10_L3BANK_MASK)
+			       & ((sseu->subslice_mask[slice]
+			       | sseu->subslice_mask[slice]>>GEN10_L3BANK_PAIR_COUNT)
+			       & GEN10_L3BANK_MASK))))
+			DRM_WARN("Real silicon should have matched L3Bank and subslice enabled\n");
+	}
 	mcr = I915_READ(GEN8_MCR_SELECTOR);
 	mcr = calculate_mcr(mcr, dev_priv);
 	I915_WRITE(GEN8_MCR_SELECTOR, mcr);
-- 
2.7.4



More information about the Intel-gfx mailing list