[Intel-gfx] [PATCH 01/14] drm/i915: Clean up ADPA pipe select bits

Jani Nikula jani.nikula at linux.intel.com
Tue Mar 20 06:27:02 UTC 2018


On Fri, 02 Mar 2018, Ville Syrjala <ville.syrjala at linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Clean up the ADPA pipe select bits. To make the whole situation a bit
> less ugly we'll start to share the same code between .get_hw_state()
> and the port state asserts.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

> ---
>  drivers/gpu/drm/i915/i915_reg.h      | 11 +++++-----
>  drivers/gpu/drm/i915/intel_crt.c     | 40 ++++++++++++++++++------------------
>  drivers/gpu/drm/i915/intel_display.c | 24 +++++-----------------
>  drivers/gpu/drm/i915/intel_drv.h     |  2 ++
>  4 files changed, 33 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 95a2e51ecbb0..f573095d60c2 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4199,11 +4199,12 @@ enum {
>  
>  #define   ADPA_DAC_ENABLE	(1<<31)
>  #define   ADPA_DAC_DISABLE	0
> -#define   ADPA_PIPE_SELECT_MASK	(1<<30)
> -#define   ADPA_PIPE_A_SELECT	0
> -#define   ADPA_PIPE_B_SELECT	(1<<30)
> -#define   ADPA_PIPE_SELECT(pipe) ((pipe) << 30)
> -/* CPT uses bits 29:30 for pch transcoder select */
> +#define   ADPA_PIPE_SEL_MASK		(1<<30)
> +#define   ADPA_PIPE_SEL_SHIFT		30
> +#define   ADPA_PIPE_SEL(pipe)		((pipe) << 30)
> +#define   ADPA_PIPE_SEL_MASK_CPT	(3<<29)
> +#define   ADPA_PIPE_SEL_SHIFT_CPT	29
> +#define   ADPA_PIPE_SEL_CPT(pipe)	((pipe) << 29)
>  #define   ADPA_CRT_HOTPLUG_MASK  0x03ff0000 /* bit 25-16 */
>  #define   ADPA_CRT_HOTPLUG_MONITOR_NONE  (0<<24)
>  #define   ADPA_CRT_HOTPLUG_MONITOR_MASK  (3<<24)
> diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
> index 391dd69ae0a4..88889af44608 100644
> --- a/drivers/gpu/drm/i915/intel_crt.c
> +++ b/drivers/gpu/drm/i915/intel_crt.c
> @@ -63,33 +63,35 @@ static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
>  	return intel_encoder_to_crt(intel_attached_encoder(connector));
>  }
>  
> +bool intel_crt_port_enabled(struct drm_i915_private *dev_priv,
> +			    i915_reg_t adpa_reg, enum pipe *pipe)
> +{
> +	u32 val;
> +
> +	val = I915_READ(adpa_reg);
> +
> +	/* asserts want to know the pipe even if the port is disabled */
> +	if (HAS_PCH_CPT(dev_priv))
> +		*pipe = (val & ADPA_PIPE_SEL_MASK_CPT) >> ADPA_PIPE_SEL_SHIFT_CPT;
> +	else
> +		*pipe = (val & ADPA_PIPE_SEL_MASK) >> ADPA_PIPE_SEL_SHIFT;
> +
> +	return val & ADPA_DAC_ENABLE;
> +}
> +
>  static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
>  				   enum pipe *pipe)
>  {
> -	struct drm_device *dev = encoder->base.dev;
> -	struct drm_i915_private *dev_priv = to_i915(dev);
> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>  	struct intel_crt *crt = intel_encoder_to_crt(encoder);
> -	u32 tmp;
>  	bool ret;
>  
>  	if (!intel_display_power_get_if_enabled(dev_priv,
>  						encoder->power_domain))
>  		return false;
>  
> -	ret = false;
> -
> -	tmp = I915_READ(crt->adpa_reg);
> -
> -	if (!(tmp & ADPA_DAC_ENABLE))
> -		goto out;
> +	ret = intel_crt_port_enabled(dev_priv, crt->adpa_reg, pipe);
>  
> -	if (HAS_PCH_CPT(dev_priv))
> -		*pipe = PORT_TO_PIPE_CPT(tmp);
> -	else
> -		*pipe = PORT_TO_PIPE(tmp);
> -
> -	ret = true;
> -out:
>  	intel_display_power_put(dev_priv, encoder->power_domain);
>  
>  	return ret;
> @@ -168,11 +170,9 @@ static void intel_crt_set_dpms(struct intel_encoder *encoder,
>  	if (HAS_PCH_LPT(dev_priv))
>  		; /* Those bits don't exist here */
>  	else if (HAS_PCH_CPT(dev_priv))
> -		adpa |= PORT_TRANS_SEL_CPT(crtc->pipe);
> -	else if (crtc->pipe == 0)
> -		adpa |= ADPA_PIPE_A_SELECT;
> +		adpa |= ADPA_PIPE_SEL_CPT(crtc->pipe);
>  	else
> -		adpa |= ADPA_PIPE_B_SELECT;
> +		adpa |= ADPA_PIPE_SEL(crtc->pipe);
>  
>  	if (!HAS_PCH_SPLIT(dev_priv))
>  		I915_WRITE(BCLRPAT(crtc->pipe), 0);
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 740a918ee578..545d89152e9b 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -1317,21 +1317,6 @@ static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
>  	return true;
>  }
>  
> -static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
> -			      enum pipe pipe, u32 val)
> -{
> -	if ((val & ADPA_DAC_ENABLE) == 0)
> -		return false;
> -	if (HAS_PCH_CPT(dev_priv)) {
> -		if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
> -			return false;
> -	} else {
> -		if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
> -			return false;
> -	}
> -	return true;
> -}
> -
>  static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
>  				   enum pipe pipe, i915_reg_t reg,
>  				   u32 port_sel)
> @@ -1362,16 +1347,17 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
>  static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
>  				      enum pipe pipe)
>  {
> +	enum pipe port_pipe;
>  	u32 val;
>  
>  	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
>  	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
>  	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
>  
> -	val = I915_READ(PCH_ADPA);
> -	I915_STATE_WARN(adpa_pipe_enabled(dev_priv, pipe, val),
> -	     "PCH VGA enabled on transcoder %c, should be disabled\n",
> -	     pipe_name(pipe));
> +	I915_STATE_WARN(intel_crt_port_enabled(dev_priv, PCH_ADPA, &port_pipe) &&
> +			port_pipe == pipe,
> +			"PCH VGA enabled on transcoder %c, should be disabled\n",
> +			pipe_name(pipe));
>  
>  	val = I915_READ(PCH_LVDS);
>  	I915_STATE_WARN(lvds_pipe_enabled(dev_priv, pipe, val),
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 652b11e788cc..79e741845e16 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1355,6 +1355,8 @@ void gen9_enable_guc_interrupts(struct drm_i915_private *dev_priv);
>  void gen9_disable_guc_interrupts(struct drm_i915_private *dev_priv);
>  
>  /* intel_crt.c */
> +bool intel_crt_port_enabled(struct drm_i915_private *dev_priv,
> +			    i915_reg_t adpa_reg, enum pipe *pipe);
>  void intel_crt_init(struct drm_i915_private *dev_priv);
>  void intel_crt_reset(struct drm_encoder *encoder);

-- 
Jani Nikula, Intel Open Source Technology Center


More information about the Intel-gfx mailing list