[Intel-gfx] [PATCH] drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt

Chris Wilson chris at chris-wilson.co.uk
Wed Mar 21 09:10:27 UTC 2018


We were relying on the uncached reads when processing the CSB to provide
ourselves with the serialisation with the interrupt handler (so we could
detect new interrupts in the middle of processing the old one). However,
in commit 767a983ab255 ("drm/i915/execlists: Read the context-status HEAD
from the HWSP") those uncached reads were eliminated (on one path at
least) and along with them our serialisation. The result is that we
would very rarely miss notification of a new interrupt and leave a
context-switch unprocessed, hanging the GPU.

Fixes: 767a983ab255 ("drm/i915/execlists: Read the context-status HEAD from the HWSP")
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry at intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Cc: Mika Kuoppala <mika.kuoppala at intel.com>
---
 drivers/gpu/drm/i915/intel_lrc.c | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index 53f1c009ed7b..67b6a0f658d6 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -831,7 +831,8 @@ static void execlists_submission_tasklet(unsigned long data)
 	struct drm_i915_private *dev_priv = engine->i915;
 	bool fw = false;
 
-	/* We can skip acquiring intel_runtime_pm_get() here as it was taken
+	/*
+	 * We can skip acquiring intel_runtime_pm_get() here as it was taken
 	 * on our behalf by the request (see i915_gem_mark_busy()) and it will
 	 * not be relinquished until the device is idle (see
 	 * i915_gem_idle_work_handler()). As a precaution, we make sure
@@ -840,7 +841,8 @@ static void execlists_submission_tasklet(unsigned long data)
 	 */
 	GEM_BUG_ON(!dev_priv->gt.awake);
 
-	/* Prefer doing test_and_clear_bit() as a two stage operation to avoid
+	/*
+	 * Prefer doing test_and_clear_bit() as a two stage operation to avoid
 	 * imposing the cost of a locked atomic transaction when submitting a
 	 * new request (outside of the context-switch interrupt).
 	 */
@@ -856,17 +858,10 @@ static void execlists_submission_tasklet(unsigned long data)
 			execlists->csb_head = -1; /* force mmio read of CSB ptrs */
 		}
 
-		/* The write will be ordered by the uncached read (itself
-		 * a memory barrier), so we do not need another in the form
-		 * of a locked instruction. The race between the interrupt
-		 * handler and the split test/clear is harmless as we order
-		 * our clear before the CSB read. If the interrupt arrived
-		 * first between the test and the clear, we read the updated
-		 * CSB and clear the bit. If the interrupt arrives as we read
-		 * the CSB or later (i.e. after we had cleared the bit) the bit
-		 * is set and we do a new loop.
-		 */
-		__clear_bit(ENGINE_IRQ_EXECLIST, &engine->irq_posted);
+		/* Clear before reading to catch new interrupts */
+		clear_bit(ENGINE_IRQ_EXECLIST, &engine->irq_posted);
+		smp_mb__after_atomic();
+
 		if (unlikely(execlists->csb_head == -1)) { /* following a reset */
 			if (!fw) {
 				intel_uncore_forcewake_get(dev_priv,
-- 
2.16.2



More information about the Intel-gfx mailing list