[Intel-gfx] [PATCH 2/2] drm/i915/psr: Remove open-coded PSR AUX transactions for SKL+
Rodrigo Vivi
rodrigo.vivi at intel.com
Wed Mar 21 20:24:36 UTC 2018
On Tue, Mar 13, 2018 at 08:46:56PM +0000, Souza, Jose wrote:
> On Mon, 2018-03-12 at 20:46 -0700, Dhinakaran Pandiyan wrote:
> > HSW and BDW have SRD_AUX_{CTL, STATUS} registers that the driver
> > needs to
> > setup for the HW to use whenever exiting PSR. SKL+ hardware use
> > hardcoded
> > values for the same and do not need any registers to be setup. So,
> > use
> > drm_dp_dpcd_writeb() for a one-time write during PSR enable and setup
> > the
> > PSR aux registers on HSW and BDW for later use by HW.
> >
> > We also end up writing to reserved bits in SRD_AUX_CTL by reusing
> > intel_dp->get_aux_send_ctl() for HSW and BDW, fix this.
> >
> > Since the AUX register setup is source side programming, move the
> > call
> > to enable_source() from enable_sink().
> >
> > Cc: José Roberto de Souza <jose.souza at intel.com>
>
> Reviewed-by: Jose Roberto de Souza <jose.souza at intel.com>
pushed to dinq. thanks for patch and review.
>
> > Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_reg.h | 6 +++++
> > drivers/gpu/drm/i915/intel_psr.c | 55 ++++++++++++++++------------
> > ------------
> > 2 files changed, 28 insertions(+), 33 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h
> > index abdc513a9edd..23c0f9bdf591 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -4151,6 +4151,12 @@ enum {
> > #define EDP_PSR_IDLE_FRAME_SHIFT 0
> >
> > #define EDP_PSR_AUX_CTL _MMIO(dev_pri
> > v->psr_mmio_base + 0x10)
> > +#define EDP_PSR_AUX_CTL_TIME_OUT_MASK (3 << 26)
> > +#define EDP_PSR_AUX_CTL_MESSAGE_SIZE_MASK (0x1f << 20)
> > +#define EDP_PSR_AUX_CTL_PRECHARGE_2US_MASK (0xf << 16)
> > +#define EDP_PSR_AUX_CTL_ERROR_INTERRUPT (1 << 11)
> > +#define EDP_PSR_AUX_CTL_BIT_CLOCK_2X_MASK (0x7ff)
> > +
> > #define EDP_PSR_AUX_DATA(i) _MMIO(dev_priv-
> > >psr_mmio_base + 0x14 + (i) * 4) /* 5 registers */
> >
> > #define EDP_PSR_STATUS _MMIO(dev_priv
> > ->psr_mmio_base + 0x40)
> > diff --git a/drivers/gpu/drm/i915/intel_psr.c
> > b/drivers/gpu/drm/i915/intel_psr.c
> > index 86d6c19c9ae6..293a987a1bfd 100644
> > --- a/drivers/gpu/drm/i915/intel_psr.c
> > +++ b/drivers/gpu/drm/i915/intel_psr.c
> > @@ -228,31 +228,12 @@ static void vlv_psr_enable_sink(struct intel_dp
> > *intel_dp)
> > DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
> > }
> >
> > -static i915_reg_t psr_aux_ctl_reg(struct drm_i915_private *dev_priv,
> > - enum port port)
> > -{
> > - if (INTEL_GEN(dev_priv) >= 9)
> > - return DP_AUX_CH_CTL(port);
> > - else
> > - return EDP_PSR_AUX_CTL;
> > -}
> > -
> > -static i915_reg_t psr_aux_data_reg(struct drm_i915_private
> > *dev_priv,
> > - enum port port, int index)
> > -{
> > - if (INTEL_GEN(dev_priv) >= 9)
> > - return DP_AUX_CH_DATA(port, index);
> > - else
> > - return EDP_PSR_AUX_DATA(index);
> > -}
> > -
> > static void hsw_psr_setup_aux(struct intel_dp *intel_dp)
> > {
> > struct intel_digital_port *dig_port =
> > dp_to_dig_port(intel_dp);
> > - struct drm_device *dev = dig_port->base.base.dev;
> > - struct drm_i915_private *dev_priv = to_i915(dev);
> > - uint32_t aux_clock_divider;
> > - i915_reg_t aux_ctl_reg;
> > + struct drm_i915_private *dev_priv = to_i915(dig_port-
> > >base.base.dev);
> > + u32 aux_clock_divider, aux_ctl;
> > + int i;
> > static const uint8_t aux_msg[] = {
> > [0] = DP_AUX_NATIVE_WRITE << 4,
> > [1] = DP_SET_POWER >> 8,
> > @@ -260,23 +241,25 @@ static void hsw_psr_setup_aux(struct intel_dp
> > *intel_dp)
> > [3] = 1 - 1,
> > [4] = DP_SET_POWER_D0,
> > };
> > - enum port port = dig_port->base.port;
> > - u32 aux_ctl;
> > - int i;
> > + u32 psr_aux_mask = EDP_PSR_AUX_CTL_TIME_OUT_MASK |
> > + EDP_PSR_AUX_CTL_MESSAGE_SIZE_MASK |
> > + EDP_PSR_AUX_CTL_PRECHARGE_2US_MASK |
> > + EDP_PSR_AUX_CTL_BIT_CLOCK_2X_MASK;
> >
> > BUILD_BUG_ON(sizeof(aux_msg) > 20);
> > -
> > - aux_clock_divider = intel_dp-
> > >get_aux_clock_divider(intel_dp, 0);
> > - aux_ctl_reg = psr_aux_ctl_reg(dev_priv, port);
> > -
> > - /* Setup AUX registers */
> > for (i = 0; i < sizeof(aux_msg); i += 4)
> > - I915_WRITE(psr_aux_data_reg(dev_priv, port, i >> 2),
> > + I915_WRITE(EDP_PSR_AUX_DATA(i >> 2),
> > intel_dp_pack_aux(&aux_msg[i],
> > sizeof(aux_msg) - i));
> >
> > + aux_clock_divider = intel_dp-
> > >get_aux_clock_divider(intel_dp, 0);
> > +
> > + /* Start with bits set for DDI_AUX_CTL register */
> > aux_ctl = intel_dp->get_aux_send_ctl(intel_dp, 0,
> > sizeof(aux_msg),
> > aux_clock_divider);
> > - I915_WRITE(aux_ctl_reg, aux_ctl);
> > +
> > + /* Select only valid bits for SRD_AUX_CTL */
> > + aux_ctl &= psr_aux_mask;
> > + I915_WRITE(EDP_PSR_AUX_CTL, aux_ctl);
> > }
> >
> > static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
> > @@ -303,7 +286,7 @@ static void hsw_psr_enable_sink(struct intel_dp
> > *intel_dp)
> > drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
> > DP_PSR_ENABLE);
> >
> > - hsw_psr_setup_aux(intel_dp);
> > + drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
> > DP_SET_POWER_D0);
> > }
> >
> > static void vlv_psr_enable_source(struct intel_dp *intel_dp,
> > @@ -599,6 +582,12 @@ static void hsw_psr_enable_source(struct
> > intel_dp *intel_dp,
> >
> > psr_aux_io_power_get(intel_dp);
> >
> > + /* Only HSW and BDW have PSR AUX registers that need to be
> > setup. SKL+
> > + * use hardcoded values PSR AUX transactions
> > + */
> > + if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
> > + hsw_psr_setup_aux(intel_dp);
> > +
> > if (dev_priv->psr.psr2_support) {
> > chicken = PSR2_VSC_ENABLE_PROG_HEADER;
> > if (dev_priv->psr.y_cord_support)
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list